Rent the right equipment for the job.
Excavators, lifts, generators, compactors and 20 categories of jobsite equipment. Search marketplace inventory, compare suppliers by location and delivery, and request rentals in one place.
- Air Compressors & Tools
- Compaction
- Concrete & Masonry
- Cranes
- Earthmoving
- Floor & Surface
- Forklifts & Material Handling
- Hand & Power Tools
- HVAC
- Lawn & Landscape
- Aerial Lifts (Scissor & Boom)
- Plumbing & Electrical
- Power & Lighting
- Pumps
- Sanitation
- Scaffolding & Ladders
- Storage & Mobile Offices
- Traffic Control & Safety
- Trenching & Shoring
- Vehicles & Trailers
Looking for equipment rental? Jobsite Jockey helps contractors, landscapers and DIYers find the right equipment for the job. Search marketplace inventory through our partner Derental by city and dates, compare suppliers by location, delivery and rates, and request the rental in one place: excavators, skid steers, lifts, forklifts, generators, compactors, lawn equipment and power tools across 20 categories.
How it works
Pick your equipment
Choose a category or machine — from mini excavators and scissor lifts to stump grinders and pressure washers.
Search your city
Enter your city and rental dates to see equipment available on the marketplace and where each supplier is located.
Compare and request
Compare suppliers side by side and send your rental request — no phone tag, no dead ends.
Our services
Portable Air Conditioner Rental
A portable air conditioner rental brings cooling to a room, tent, server closet or job site that has no central AC or needs more than it has. Options range from small room units to commercial spot coolers, so match the unit's capacity, power needs and exhaust setup to the space before you book. ## When renting a portable AC makes sense Portable AC rental is a short-term fix for spaces that get too hot for people, products or equipment. Because the units roll on casters and plug in, they can go where window units and permanent systems cannot. Common uses include: - Temporary cooling while a building's HVAC system is down or being replaced - Server rooms, IT closets and electrical rooms that overheat - Events, tents, weddings and outdoor workspaces - Warehouses, kitchens and production areas with hot spots - Construction and renovation sites where workers need relief - Keeping heat-sensitive materials or equipment within range ## Types of portable cooling units | Type | How it works | Good for | |---|---|---| | Room portable AC | Refrigerant system with an exhaust hose to a window or wall | Bedrooms, offices, small rooms | | Spot cooler | Commercial portable AC that blows cold air through ducts aimed at people or equipment | Server rooms, warehouses, job sites | | Water-cooled portable unit | Uses a water connection instead of venting hot air | Rooms with no easy way to exhaust air outside | | Evaporative air cooler | Cools air by evaporating water; no refrigerant | Open, well-ventilated areas in dry climates | A true air conditioner removes heat and moisture, while a portable air cooler only lowers temperature through evaporation and adds humidity. Coolers work best in dry heat and open spaces. In humid regions or closed rooms, a refrigerant unit is usually the better choice. ## How to choose the right portable AC unit Capacity matters most. Portable units are rated in BTUs or tons of cooling, and the right size depends on the room's square footage, ceiling height, sun exposure, insulation and the heat put out by people and equipment. Server rooms and kitchens need more cooling than their floor area suggests. Describe the space to the supplier and let them help size it. Then look at three practical details: - Exhaust. Refrigerant units push hot air out through a hose or duct. You need a window, drop ceiling, door panel or vent where that air can go, or a water-cooled unit instead. - Condensate. Air conditioners pull water out of the air. Some units collect it in a tank you empty, others pump it to a drain. Ask which setup the unit uses. - Power. Smaller units run on a standard outlet, while larger spot coolers may need a dedicated circuit or higher-voltage power. Confirm what is available on site before the unit arrives. ## Tips before you rent - Measure doorways and elevators so the unit can roll into place. - Plan the exhaust route and drainage before delivery day. - Avoid running a large unit on an extension cord that is not rated for the load. - Close doors and windows in the space you are cooling so the unit is not fighting outside air. - For critical rooms, ask whether the supplier offers units with automatic restart after a power interruption. - Keep the intake and exhaust clear of boxes and walls. ## How to find a portable AC rental near me When you search for portable AC rental near me, start with your city, the rental dates and the space you need to cool. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace, including portable AC units and spot coolers. Compare a few suppliers. Rates are set by each supplier and vary by unit size, rental length, location and delivery. Ask about setup, ducting and hoses, drainage accessories and what happens if you need the unit longer. Then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see portable air conditioning units for rent in your area.
Learn more →Drywall Lift Rental
A drywall lift rental holds full sheets of drywall overhead so one or two people can hang ceilings without straining to hold the board in place. It also positions panels for tall walls and sloped ceilings, and folds down to fit in most vehicles for easy pickup. ## What a drywall lift does A drywall lift, also called a sheetrock lift or panel lift, is a rolling stand with a crank-operated mast and a cradle that holds a sheet of drywall. You load the sheet at waist height, tilt the cradle flat, crank it up until the board presses against the ceiling joists, then fasten it while the lift holds the weight. Without a lift, ceiling work usually means two or three people balancing a heavy sheet on their heads and hands while someone else drives screws. A lift turns that into a controlled, steady process and reduces the risk of dropping a board or injuring a back or shoulder. Typical jobs include: - Hanging ceiling drywall in basements, garages and additions - Installing sheets on vaulted, cathedral or sloped ceilings - Placing upper wall panels on tall walls and stairwells - Hanging ceiling panels, cement board or similar sheet goods ## Parts and features to understand | Feature | What it does | |---|---| | Base with casters | Rolls the lift into position and locks in place | | Telescoping mast | Raises the sheet with a hand crank and winch | | Cradle or head | Holds the sheet; tilts from upright for loading to flat for ceilings | | Cradle extensions | Support longer sheets so they do not sag at the ends | | Mast extension | Adds reach for higher ceilings on many lifts | | Tilt adjustment | Angles the sheet to match sloped ceilings | ## How to choose the right drywall lift Measure your ceiling height first. Standard lifts cover typical residential ceilings, and many accept an extension piece for taller rooms, vaults and garages. Tell the supplier your highest point so they can confirm the lift reaches it. Next, match the cradle to your sheet length. Most lifts handle standard sheets, and extension arms help support longer boards that would otherwise droop. Thicker or fire-rated drywall is heavier, so confirm the lift's rated load if you plan to use those sheets. If you are working on sloped ceilings, look for a model with a tilt lock that holds the cradle at an angle. For walls, the cradle can be set upright to lift a sheet into place against the studs. ## Tips before you rent - Plan your layout and snap chalk lines on the framing before the lift arrives. - Clear the floor. The casters need a fairly smooth, debris-free surface to roll safely. - Lock the casters before raising a sheet, and never move the lift with a board raised high. - Keep hands clear of the winch and cable while cranking. - Wear eye protection when fastening overhead, since dust and screw fragments fall straight down. - Check how the lift breaks down. Most separate into the base, mast and cradle so they fit in an SUV or pickup bed. - Rent for the number of days you realistically need. A large ceiling job often goes faster than expected once the lift is set up. ## Drywall lift rental price and how to find one near me People often search for the cost to rent a drywall lift before booking. There is no single number. Rates are set by each supplier and vary by rental length, location, whether extensions are included and whether you need delivery. Daily, weekly and weekend options are common, so compare how long your job will run against each rate. To find a drywall lift rental near me, search by city and the dates you need it. Jobsite Jockey shows live inventory from rental suppliers on the Derental marketplace, so you can see who has sheetrock lifts available without calling around. compare a few suppliers' rates, pickup and delivery options, and rental terms, then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see drywall lifts available in your area.
Learn more →Forestry Mulcher Rental
A forestry mulcher rental clears brush, saplings and small trees by grinding them into mulch right where they stand, leaving cleared ground in a single pass. Most rentals are a skid steer with a mulcher attachment, so make sure the machine and hydraulic system match the head you plan to run. ## What a forestry mulcher is used for A forestry mulcher uses a spinning drum or disc fitted with teeth or knives to shred vegetation. Instead of cutting, piling, hauling and burning brush, you drive the machine through the growth and leave a layer of mulch behind. That mulch helps hold soil in place and breaks down over time. Typical jobs include: - Clearing overgrown lots before building, fencing or surveying - Cutting fence lines and property boundaries - Opening trails, firebreaks and access paths - Removing invasive brush and understory in wooded areas - Reclaiming pastures and right-of-ways from saplings ## Types of mulchers you can rent | Setup | What it is | Best for | |---|---|---| | Skid steer or compact track loader with drum mulcher | Hydraulic drum head mounted on the loader | Most land clearing, steady finish | | Skid steer with disc mulcher | Spinning disc that cuts quickly | Fast cutting of standing saplings | | Excavator-mounted mulcher | Mulching head on an excavator arm | Slopes, ditches, reaching over obstacles | | Dedicated forestry mulcher | Purpose-built tracked machine | Large or heavy clearing jobs | When people search to rent a skid steer with mulcher, they usually mean a compact track loader or skid steer fitted with a drum head. Tracked machines generally do better on soft or uneven ground than wheeled ones. ## How to choose the right mulcher The biggest factor is hydraulic flow. Many mulching heads need a high-flow hydraulic system on the carrier, and running a head on a machine that cannot supply enough flow leads to poor performance. If you already own a skid steer and only want a mulcher rental for the attachment, confirm your machine's hydraulic flow, coupler type and whether it has the guarding needed for mulching work. Next, think about the material. Grass, vines and light brush are easy for any head. Dense saplings and small trees need a stronger setup. Large trees are better felled first and handled separately, since a mulcher is designed for brush and smaller growth. Also consider terrain. Steep slopes and wet ground can make a skid steer unstable. An excavator mulcher may be safer for banks and ditches. ## Safety tips before you rent - Walk the site first and mark stumps, rocks, wire, metal posts and anything that could damage the teeth or be thrown. - Set a large exclusion zone. Mulchers can throw chips and debris a long way, so keep people, vehicles and windows well back. - Use a machine with a cab door and guarding rated for forestry work, and keep it closed. - Call 811 before any work that disturbs the ground, especially if the head may contact soil, so buried utilities are marked. - Watch for overhead power lines and keep the machine well clear. - Check local rules on land clearing, wetlands and protected areas before starting. - Plan transport. A skid steer with mulcher typically needs a suitable trailer and tow vehicle, or supplier delivery. ## How to find forestry mulcher rental near me To find a forestry mulcher for rent near you, search by city and the dates you need it. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace, including skid steers, compact track loaders and mulching attachments. Compare a few suppliers before you book. Rates are set by each supplier and vary by machine size, attachment, rental length, location and delivery. Ask about tooth wear charges, cleaning requirements and fuel policy, then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see mulchers and skid steers for rent in your area.
Learn more →Dumpster Rental
A dumpster rental near me search usually ends with a roll-off container dropped at your site, filled at your pace, then hauled away by the supplier. Pick the size by debris volume and weight, confirm where it can sit, and compare a few suppliers before you book. ## What a roll-off dumpster is used for A roll off dumpster rental is an open-top steel container that a truck slides onto your driveway or job site and later winches back up to haul to a landfill or transfer station. It is the standard answer for any project that produces more waste than curbside bins can take: kitchen and bath remodels, roof tear-offs, garage and estate cleanouts, yard debris after storm cleanup, flooring replacement, and small demolition or new-construction jobs. Contractors keep one on site so crews can toss debris as they go instead of making repeated dump runs. ## Common dumpster sizes Roll-off containers are sized in cubic yards. The numbers below are typical uses, not hard rules, since container dimensions and weight allowances vary by supplier. | Size | Typical jobs | |---|---| | 10 yard | Small bathroom remodel, garage cleanout, shingle tear-off on a small roof, heavy material like dirt or concrete in small amounts | | 15 yard | Kitchen remodel, flooring removal, a larger cleanout | | 20 yard | Whole-room renovations, larger roof jobs, moderate construction debris | | 30 yard | New construction, major renovations, large cleanouts | | 40 yard | Large commercial jobs, bulky but lightweight debris | A 10 yard dumpster rental is popular with homeowners because it fits in most driveways and handles dense debris without running past the weight allowance. Bigger containers hold more volume, but every container comes with a weight limit, and heavy loads like concrete, brick or soil can hit that limit long before the box looks full. ## How to choose the right dumpster - Estimate volume, then weight. Bulky, light material (furniture, drywall scraps, packaging) fills space fast. Dense material (roofing, tile, dirt, concrete) fills the weight allowance fast. - Ask about clean loads. Some garbage dumpster rental and waste dumpster rental suppliers handle concrete, dirt or yard waste separately, and mixing them with general trash can change how the load is handled. - Check prohibited items. Hazardous waste, paint, chemicals, batteries, tires and appliances with refrigerant are commonly restricted. Each supplier and local landfill sets its own list. - Plan the rental length. Most rentals include a set number of days; ask how extensions and swap-outs (emptying and returning the container) work. ## Tips before your dumpster arrives - Pick the spot. The delivery truck needs straight-line access and overhead clearance from wires and branches. Leave room for the container plus the truck's approach. - Protect the surface. Ask the supplier about boards or pads under the rails if the container will sit on a paved driveway. - Check permits. Placing a container on a public street or sidewalk often requires a permit from your city. Your HOA may have its own rules. - Load it evenly. Spread heavy debris across the floor, keep everything below the top edge, and never overfill. An overloaded container may not be hauled until it is fixed. - Work safely. Wear gloves and eye protection, break down bulky items, and keep kids away from the container. ## How to find a dumpster rental near you Dumpster rental companies range from national haulers to small local operators, and rates are set by each company based on size, rental length, weight allowance and your location. Ask each hauler about weight limits, overage fees and prohibited items before you book. Our marketplace partner lists very few dumpsters so far, mostly outside California. Use the request form on our contact page to tell us your city, dates and dumpster size, and we will reach out when we can connect you with a hauler that serves your area.
Learn more →Motor Grader Rental
A motor grader rental shapes and levels large areas with a long, adjustable blade, for roads, pads, ditches and parking lots. Grading takes skill, so plan for an experienced operator, then compare suppliers for your dates. ## What a motor grader is used for Graders cut and spread material to a precise grade, shape road crowns, cut ditches and level large building pads. For smaller lots, a [skid steer](/skid-steer-rental/) with a grading attachment or a [dozer](/dozer-rental/) may be more practical. ## Types of graders | Type | Best for | |---|---| | Compact grader | Smaller sites and maintenance | | Standard motor grader | Roads, pads and large site work | | Grader with GPS grade control | Tight tolerances on large jobs | | Tractor grader blade | Light leveling on farms and lots | ## How to choose the right grader - Size it to the job. Bigger graders cover large areas faster, but need room to turn. - Ask about grade control. GPS or laser systems speed precise work. - Plan the operator. Most renters book with an experienced operator. - Check access. Graders are long and need a lowboy trailer to arrive. - Plan compaction. Pair grading with a [roller rental](/roller-rental/). ## How a grading job works 1. Confirm the design grades and have utilities marked. 2. Rough grade with a dozer or loader if large amounts of soil need moving. 3. Use the grader to cut, fill and fine grade in passes. 4. Keep the material at the right moisture. 5. Compact in layers as you go. 6. Check grades with stakes, lasers or GPS. ## Mistakes to avoid - Grading without marked utilities. Ditches cut deep. - Expecting a grader to move bulk dirt. Use a dozer or loader for that. - Skipping compaction. Graded areas settle. - Working on soft ground. Graders lose traction and grade quality. - Choosing an inexperienced operator. Grading quality shows. ## Tips before you rent - Share the area, grades and timeline with suppliers. - Ask about operated rentals and grade control. - Confirm transport and site access. ## How to find a motor grader rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Dethatcher & Power Rake Rental
A dethatcher rental pulls the matted layer of dead grass and roots out of your lawn so water, air and fertilizer can reach the soil. Light thatch calls for a spring-tine dethatcher; heavy buildup calls for a power rake with flail blades. ## What a Dethatcher Does Thatch is the layer of dead stems, runners and roots that builds up between the green grass and the soil. A thin layer is normal, but once it gets thick it acts like a sponge, shedding water, hosting pests and disease, and keeping roots shallow. A lawn dethatcher rental uses spinning tines or blades to lift that layer to the surface so you can rake or bag it away. Dethatching is often done right before overseeding, because it opens up the soil so new seed makes contact. ## Dethatcher vs Power Rake The terms get used interchangeably, but the machines differ in how aggressive they are. | Machine | Action | Best for | |---|---|---| | Spring-tine dethatcher | Flexible wire tines comb through the turf | Light thatch, routine maintenance, gentler on the lawn | | Power rake (flail or blade) | Rigid blades or flails slice and lift | Heavy thatch, renovation, prepping for overseeding | | Tow-behind dethatcher | Tine frame pulled by a riding mower or tractor | Large lawns with light thatch | | Aerator (related) | Pulls soil cores | Compacted soil; often paired with dethatching | If you push a screwdriver or your finger into the lawn and feel a spongy brown layer more than about half an inch thick, it is a good candidate for a power rake rental. ## How to Choose and Time It - Match aggressiveness to thatch depth. Light thatch only needs a spring-tine unit. Thick thatch needs a power rake, but set it shallow at first and adjust. - Know your grass type. Cool-season grasses such as fescue, bluegrass and ryegrass are usually dethatched in early fall or early spring. Warm-season grasses such as Bermuda and zoysia are usually dethatched in late spring to early summer, once they are actively growing. Dethatch when the grass can recover. - Set the depth carefully. Blades should just reach the thatch layer and lightly touch the soil surface, not tear up healthy crowns or dig trenches. - Lawn size. A walk-behind power dethatcher rental covers most residential yards. Very large properties may justify a tow-behind unit. ## Tips Before You Rent - Mow the lawn shorter than usual a day or two before dethatching, and water lightly a day ahead so the soil is moist but not muddy. - Mark sprinkler heads, valve boxes, shallow cables and edging so the blades do not catch them. - Make one pass in one direction, check the result, and only then make a second pass at an angle if needed. - Expect a lot of debris. Have a rake, tarps and lawn bags or a compost plan ready. - Wear eye protection, hearing protection, gloves and sturdy shoes. Shut the engine off before adjusting depth or clearing debris from the blades. - Follow up with overseeding, fertilizer as appropriate and consistent watering while the lawn recovers. - Most walk-behind units fit in a pickup with ramps; ask the supplier about weight and loading. ## How to Find Dethatcher Rental Near You Use the Browse equipment button to search for dethatcher rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including spring-tine units, power rake tool rental options and aerators if you want to do both jobs the same weekend. Compare machine type, working width, depth adjustment and whether delivery is offered. Rates are set by each supplier and vary by machine, rental length, location and delivery. A half day or full day is usually enough for a typical yard. When you are ready to rent a power rake, request it online and confirm pickup details directly with the supplier.
Learn more →Lawn Mower Rental
A lawn mower rental gets an overgrown or oversized yard under control without buying a machine you will rarely use. Pick a push mower for small or tight lawns, a riding mower for open acreage, or a zero turn mower for speed around obstacles. ## When Renting a Mower Makes Sense Renting a mower is a smart move when your own mower is in the shop, you are getting a property ready to sell or move into, you are catching up on a lawn that has gotten away from you, or you have a one-time job like a large event lawn or a vacant lot. Contractors also rent mowers to add capacity during peak season without buying another machine. If the grass is waist-high or full of saplings, a regular lawn mower is the wrong tool; look at a brush cutter or field mower instead. ## Types of Mowers You Can Rent | Type | Best for | Things to know | |---|---|---| | Push or self-propelled walk-behind | Small to mid-size lawns, slopes, tight spaces | Self-propelled models reduce effort on hills; some have bagging or mulching | | Wide-area walk-behind | Larger lawns and commercial properties | Wider deck than a homeowner mower, still maneuverable | | Riding lawn mower or lawn tractor | Open lawns of about half an acre and up | Comfortable for long runs; slower to trim around obstacles | | Zero turn mower | Large lawns with trees, beds and edges | Turns in place for fast trimming; lap-bar steering takes practice | ## How to Choose the Right Mower - Measure your area. A grass mower rental for a city lot can be a simple push mower. Once you are mowing a large property, a riding or zero turn unit saves real time. - Count the obstacles. Lots of trees, beds and fences favor a zero turn mower rental. Long open stretches favor a riding mower. - Check the slope. Zero turn and riding mowers can lose traction or tip on steep grades. Walk-behind mowers are usually the safer choice on hillsides; mow steep slopes across, not up and down, with a walk-behind, and follow the machine's slope limits. - Check access. Measure gates and paths. A wide deck will not fit through a narrow side gate. - Decide on clippings. If you need to bag or discharge clippings, ask the supplier which decks and attachments come with the rental. ## Tips Before You Rent - Walk the lawn first and pick up rocks, sticks, toys, hoses and dog leads. Mark sprinkler heads and stumps. - Very tall grass should be cut in stages, raising the deck for the first pass so you do not bog the engine or scalp the lawn. - Wear closed-toe shoes, long pants, eye protection and hearing protection. Keep children and pets indoors while mowing. - Never reach under the deck or clear a clog while the engine is running. Shut it off and wait for the blade to stop completely. - On riding and zero turn mowers, learn the controls in an open area, keep the rollover protection up where fitted and use the seat belt as the manufacturer directs, and stay away from drop-offs and pond edges. - Transport: walk-behind mowers fit in many pickups with a ramp. Riding mowers usually need a trailer or delivery. ## How to Find Lawn Mower Rental Near You Use the Browse equipment button to search for lawn mower rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including push mowers, riding mower rental options and zero turn units. Compare deck width, bagging options, delivery availability and each supplier's terms. Rates are set by each supplier and vary by mower type and size, rental length, location and delivery. A single day often covers a one-time cleanup, while weekly or monthly terms can suit a landscaper filling a seasonal gap. When you are ready to rent a mower, request it online and confirm pickup or delivery details with the supplier.
Learn more →Wood Chipper Rental
A wood chipper rental turns branches, brush and small trees into chips you can spread as mulch or haul away in a fraction of the space. Pick the size by the largest branch diameter you will feed, plan how you will tow it, and compare a few suppliers. ## What a wood chipper is used for A wood chipper feeds branches through an infeed chute into a spinning disc or drum fitted with knives, then blows the chips out of a discharge chute. It is the fastest way to deal with the pile of limbs left after tree trimming, storm cleanup, lot clearing or a big pruning weekend. Instead of bundling branches for curbside pickup or making repeated dump runs, you end up with a compact pile of chips that works well as mulch for beds, paths and around trees. Landscapers, tree crews and property owners rent them for brush clearing along fence lines, cleaning up after removals, and keeping trails and right-of-ways clear. ## Types of chippers | Type | Best for | |---|---| | Small chipper-shredder | Homeowner yard work, small branches, leaves and garden waste | | Towable brush chipper, disc style | Most residential tree and brush cleanup; produces uniform chips | | Towable drum chipper | Larger volumes and heavier wood; pulls material in aggressively | | Large tree chipper | Crew-scale tree removal and land clearing | Chippers are rated by the maximum branch diameter they can accept. A tree chipper rental for crew work handles much thicker limbs than a homeowner unit. A chipper-shredder, sometimes listed as a wood shredder rental or tree shredder rental, is smaller and better suited to light, leafy material than to solid limbs. ## How to choose the right wood chipper - Measure your biggest branches. Choose a machine rated comfortably above the diameter you plan to feed most often. - Estimate your volume. A few hours of pruning debris is a small-machine job. A full tree removal or a cleared lot calls for a towable brush chipper. - Consider feed style. Machines with hydraulic feed rollers pull material in at a steady pace and reduce operator effort. - Think about chip disposal. Decide whether chips will be spread on site, blown into a trailer or truck, or hauled away. ## Tips before you rent a wood chipper - Plan towing. Most brush chippers are trailer-mounted. Check your hitch, ball size and wiring, and confirm the supplier's towing requirements. - Wear proper PPE. Safety glasses or a face shield, hearing protection, gloves without loose cuffs, a hard hat when working near trees and close-fitting clothing. - Never reach into the infeed. Push short pieces in with a longer branch, not your hands, feet or a tool you are holding onto. - Feed butt end first and let go once the rollers grab the material. Stand to the side of the chute, never directly in front. - Know the stop controls before you start, and keep children, pets and bystanders well away from the work area. - Keep stones, dirt, metal and nails out of the feed. They can damage knives and become projectiles. - Point the discharge chute away from people, vehicles, windows and roads. ## How to use a wood chipper Run through these steps in order every time you start a chipping session. 1. Park the chipper on firm, level ground, chock the wheels, and lower the trailer jack or stand so it cannot roll or tip. 2. Aim the discharge chute where you want the chips to land, away from people, cars, windows and the road, and lock it in place. 3. Put on safety glasses or a face shield, hearing protection, close-fitting gloves, a hard hat near trees, and clothing with no loose sleeves, drawstrings or jewelry. 4. Walk around the machine and find the emergency stop, the feed control bar and the engine shutoff before you start the engine. 5. Start the engine with the infeed clear, let it warm up, and bring it to full operating speed before feeding anything. 6. Feed branches butt end first from the side of the infeed chute, let go as soon as the rollers grab, and step back out of the way. 7. Push short pieces and leafy tips in with a longer branch, never with your hands or feet, and never reach into the infeed for any reason. 8. When you finish, run the machine empty for a moment to clear the chamber, then shut off the engine and wait for the disc or drum to stop completely. 9. Rake up chips and debris around the infeed and on the trailer tongue, and return the chipper with the chutes clear and nothing jammed inside. ## Mistakes to avoid - Feeding branches bigger than the rated diameter. The rollers stall or the knives take a beating, and you spend the afternoon clearing jams. - Wearing loose gloves or a hoodie with drawstrings. Anything that dangles near the infeed can be caught and pulled in with the branch. - Standing directly in front of the infeed. Branches can whip sideways as the rollers grab them, and debris can kick back out of the chute. - Clearing a jam with the engine running. Shut it off, wait for the disc to stop and remove the key before you touch anything inside. - Chipping brush that has been dragged through dirt and gravel. Stones and grit dull the knives fast and get thrown out of the discharge chute. - Leaving the pile unsorted. Stopping every few minutes to untangle crooked limbs wastes the rental clock more than the chipping itself. - Forgetting where the chips go. A towable chipper can bury a flower bed or fill a driveway before you notice. ## Pro tips - Trim side branches off long limbs first so each piece feeds straight instead of catching on the chute edges. - Mix leafy, green material with drier wood. Feeding only soft, wet greenery can clog the discharge chute. - Pull the feed control to reverse briefly if a forked branch hangs up, then reposition it rather than forcing it. - Back a trailer or truck bed up to the discharge chute if you plan to haul chips away, so you only handle the material once. - Keep a second person on ground duty to drag and stack brush, but only one person feeds the machine at a time. If the bigger problem is what is left in the ground after the tree comes down, a [stump grinder rental](/stump-grinder-rental/) is the next step, and a [chainsaw rental](/chainsaw-rental/) helps you cut limbs to manageable length before chipping. ## How to find a wood chipper rental near me Rates are set by each supplier and vary by machine size, rental length, location and delivery. Half-day and daily periods are common for homeowner cleanups, with weekly options for larger clearing jobs. To rent a woodchipper, use the Browse equipment button to search by your city and rental dates. You will see live brush chipper rental listings from rental suppliers on the Derental marketplace. Compare a few options on capacity, feed system, towing setup, delivery and each supplier's terms, then request the machine online. Stack your branches with the cut ends facing the same way before pickup so feeding goes faster.
Learn more →Asphalt Paver & Paving Equipment Rental
An asphalt paver rental lays hot mix in an even mat for driveways, parking lots and roads. Paving jobs also need rollers and support equipment, so plan the whole crew and machine set, then compare suppliers for your dates. ## What paving equipment is used for Pavers spread and pre-compact asphalt to a set width and depth. Rollers finish the compaction. Crews also use milling machines, brooms, plate compactors and breakers for prep and patching. See the [roller rental](/roller-rental/) and [plate compactor rental](/plate-compactor-rental/) guides for compaction. ## Types of paving equipment | Equipment | Best for | |---|---| | Wheeled asphalt paver | Faster moves between jobs and firm bases | | Tracked asphalt paver | Better traction on soft or uneven base | | Small or mini paver | Driveways, paths and tight areas | | Double drum roller | Finishing asphalt mats | | Pneumatic roller | Kneading compaction on asphalt | | Pavement breaker | Removing old pavement and patching | ## How to choose paving equipment - Size the paver to the width. Screed width should match your typical pass. - Pick tracks or wheels. Base condition and travel between areas decide it. - Plan the material supply. Trucks have to keep the paver fed at a steady pace. - Match the rollers. Your asphalt mix and thickness affect which rollers you need. - Consider an operator. Paving takes skill, and a good mat depends on it. ## How a paving job works 1. Prepare and compact the base, and confirm the drainage slope. 2. Set the screed width, depth and crown. 3. Keep trucks moving so the paver doesn't stop and start. 4. Roll while the asphalt is still at the right temperature. 5. Check the surface and fix low spots right away. 6. Keep traffic off until the mat has cooled enough. ## Mistakes to avoid - Paving over a weak base. Failures show up quickly. - Stopping the paver often. Starts and stops leave bumps. - Rolling too late. Cold asphalt won't compact properly. - Skipping traffic control on roads. It's usually required. - Renting without an experienced operator. Paving is unforgiving. ## Tips before you rent - Ask whether the paver can be rented with an operator. - Line up rollers and trucks for the same dates. - Check transport, since pavers need a lowboy trailer. ## How to find a paver rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Tiller Rental
A tiller rental gives you a gas-powered machine that breaks up and mixes soil so you can start a new garden bed or prepare ground for planting or sod. Choose front-tine, rear-tine or a small cultivator based on how hard your ground is, then compare suppliers. ## What a tiller is used for A tiller, often called a rototiller, uses rotating metal tines to dig into the ground, break up compacted soil and chop it into a loose, workable bed. It is the go-to machine for turning a patch of lawn into a vegetable garden, preparing ground for new sod or seed, and mixing compost, manure or amendments into existing beds. Landscapers use larger units to prep planting areas on new construction and renovation jobs. A cultivator is a smaller, lighter cousin. It works the top few inches of already-loose soil to weed between rows and blend in amendments, rather than breaking new ground. People searching for a tiller cultivator rental are often deciding between the two. ## Types of tillers | Type | Best for | |---|---| | Mini cultivator | Weeding and loosening existing beds, small spaces, raised beds | | Front-tine tiller | Existing gardens and softer soil; tines are in front of the wheels | | Rear-tine tiller | Breaking new ground, sod, clay and hard soil; heavier and more stable | | Tractor tiller (PTO-driven) | Large plots, food plots and acreage, mounted on a compact tractor | A rear tine tiller rental is usually the right choice when you are starting a garden from lawn or working heavy clay. The tines sit behind powered wheels, so the machine pulls itself forward steadily instead of bucking. Front-tine machines are lighter and easier to maneuver in established beds. A tractor tiller rental only makes sense if you already have a compatible tractor with a power take-off and three-point hitch. ## How to choose the right tiller - Assess your soil. New ground, sod and clay need a rear-tine machine. Loose, established garden soil works fine with a front-tine tiller or cultivator. - Measure the area. A small garden plot is a short job for any tiller. Large plots go faster with a wider tilling width. - Think about depth. Rear-tine tillers generally dig deeper and more consistently. - Consider handling. Front-tine tillers are lighter but take more muscle to control in tough ground. Rear-tine tillers are heavier but steadier. ## Tips before you rent - Call 811 before tilling, especially in a new area. Shallow utility lines can be closer to the surface than you expect. - Check moisture. Squeeze a handful of soil. It should crumble, not form a sticky ball. Tilling wet soil creates clods and compaction; bone-dry soil is hard to break. - Clear the area. Remove rocks, roots, sticks, wire, hoses and edging. Mark sprinkler heads and irrigation lines. - Remove sod first if you can. A sod cutter makes breaking new ground much easier on the tiller and on you. - Start shallow and work deeper with several passes rather than forcing full depth at once. - Wear sturdy boots, long pants, eye and hearing protection. Keep hands and feet away from the tines and know where the stop control is. - Plan transport. Tillers are heavy. Bring help, ramps and tie-down straps, or ask about delivery. ## How to use a tiller Tilling goes smoother when you treat it as a few shallow passes instead of one deep plunge. 1. Call 811 a few days before digging so buried utility lines are marked, and stay clear of the marks. 2. Clear rocks, roots, sticks and trash from the area and mark sprinkler lines so the tines do not snag them. 3. Wear boots, long pants, eye protection, hearing protection and gloves, and keep children and pets away from the work area. 4. Set the depth bar or drag stake shallow for the first pass, and check fuel and oil before starting. 5. Start the engine with the tines disengaged, then engage them and let the tiller pull itself forward at a walking pace. 6. Work in straight, slightly overlapping rows, holding the handles firmly but letting the machine do the work. 7. Lower the depth a little on each additional pass until you reach the depth your bed needs, then work in compost or amendments. 8. Disengage the tines before turning, crossing a path or backing up, and never back up toward your own feet. 9. Shut off the engine, wait for the tines to stop, then scrape off packed soil and wrapped roots before returning the machine. ## Mistakes to avoid - Tilling wet soil. It forms clods and compacted layers that are harder to plant than what you started with. - Going full depth on the first pass. A front-tine tiller will buck and hop, and a rear-tine tiller can lurch forward. - Running over long grass and vines without stopping. They wrap around the tine shaft and choke the machine. - Pulling the tiller backward with the tines turning. That is when feet get too close to the tines. - Tilling up sod in one go. Strip or kill the turf first, or you end up with clumps of grass that regrow everywhere. - Ignoring buried lines. A tiller can cut irrigation pipe, low-voltage lighting cable and shallow utilities. ## Pro tips - Squeeze a handful of soil before you start; if it holds a ball and breaks apart when poked, it is ready to till. - Spread compost on top before your final pass so the tiller mixes it in for you. - A rear-tine tiller is much easier on your back for breaking new ground; save front-tine models for loosening existing beds. - Wrap a rag or tape over the throttle cable if it vibrates loose, and check tine bolts if the machine starts to shake. - If you are pulling turf before you till, a [sod cutter rental](/sod-cutter-rental/) lifts it in clean strips, and our [landscaping equipment rental](/landscaping-equipment-rental/) guide covers other bed-prep tools. ## How to find a tiller rental near me Rates are set by each supplier and vary by machine type, tilling width, rental length, location and delivery. Half-day and daily rentals are common for garden projects. To compare rototiller rental near me options, use the Browse equipment button to search by your city and rental dates. You will see live listings from rental suppliers on the Derental marketplace. Compare a few garden tiller rental options on tine style, size, transport and each supplier's terms, then request the machine online.
Learn more →Dump Truck Rental
A dump truck rental lets you haul gravel, topsoil, mulch, debris and excavated dirt yourself, then unload it in seconds with a hydraulic bed. Small dump trucks suit most homeowners; larger trucks may require a commercial driver's license. ## What a Dump Truck Is Used For A dump truck carries loose, heavy material and tips its bed to unload without shoveling. Contractors and landscapers use them to move fill dirt and excavated soil off a site, bring in gravel, sand, stone or mulch, haul concrete and demolition debris to a recycler or landfill, and carry brush and storm cleanup. For homeowners, a small dump truck rental is useful for a big landscaping project, a driveway regrade or clearing out a renovation, when repeated pickup loads would take all weekend. ## Types and Sizes | Type | Typical use | Notes | |---|---|---| | Small or light-duty dump truck | Landscaping, residential cleanup, small loads | Often drivable on a regular license; check the weight rating | | Medium-duty dump truck | Contractors, larger material hauls | May require a commercial driver's license depending on weight rating | | Tandem or tri-axle dump truck | Heavy hauling, excavation and paving | Commercial license and experience required | | Dump trailer (alternative) | Towed by a pickup | A good option if you have a capable tow vehicle | In the US, a vehicle with a gross vehicle weight rating over 26,000 pounds generally requires a commercial driver's license. Always confirm the truck's rating and your state's rules with the supplier before booking. ## How to Choose the Right Truck - Know your material. Gravel, wet soil and concrete are much heavier per cubic yard than mulch or brush. Weight, not just volume, determines how much you can legally and safely carry. - Match capacity to load count. A smaller truck may mean more trips but easier driving and parking. A larger truck carries more per trip but needs more room and a qualified driver. - Check your license. If you or your crew do not hold a CDL, filter for trucks that do not require one, or consider whether the supplier can provide a driver. - Think about the site. Narrow driveways, soft lawns, overhead wires and tree limbs all limit where a truck can go and where you can raise the bed. - Consider a dump trailer. If you already have a heavy-duty pickup, a dump trailer can be a flexible alternative. ## Tips Before You Rent - Never overload. Stay within the truck's rated payload and spread the load evenly. - Check for overhead power lines and branches before raising the bed, and only dump on firm, level ground. Dumping on a slope or soft ground can tip the truck. - Cover or tarp loose loads as local laws require. - Confirm where you can dump. Landfills, recyclers and transfer stations often have rules about mixed debris, concrete and soil. - Do a walkaround before driving off: tires, lights, mirrors, the hydraulic hoist and tailgate latch. - Ask about fuel policy, mileage terms and insurance requirements. ## How to Find Dump Truck Rental Near You Use the Browse equipment button to search dump truck rental near me by city and rental dates. You will see live listings from rental suppliers and dump truck rental companies on the Derental marketplace, so you can compare sizes, license requirements and options side by side. Dump truck rental rates are set by each supplier and vary by truck size, rental length, mileage terms, location and delivery. Daily rentals suit a single big haul, while weekly or longer terms can make sense for a contractor covering a busy stretch; ask suppliers about longer terms if you are comparing dump trucks for lease. Once you have found the right truck, request it online and confirm license, insurance and pickup details directly with the supplier.
Learn more →Engine Hoist & Chain Hoist Rental
An engine hoist rental lifts engines and other heavy parts in a shop or garage, while a chain hoist lifts loads from an overhead support. Confirm your load weight, height and floor or beam capacity, then compare suppliers for your dates. ## What a hoist is used for Engine hoists, also called cherry pickers or shop cranes, pull and install engines and move heavy parts. Chain hoists lift machinery, pipe and materials from a rated beam or gantry. For lifting drywall panels, see the [drywall lift rental](/drywall-lift-rental/) guide. ## Types of hoists | Type | Best for | |---|---| | Folding engine hoist | Engine swaps in home and small shops | | Long-reach shop crane | Reaching over a truck or larger vehicle | | Manual chain hoist | Controlled lifting from a rated support | | Lever hoist | Short pulls and positioning, including at angles | | Electric chain hoist | Repeated lifts where power is available | ## How to choose the right hoist - Weigh the load. Include lifting brackets and anything still attached. - Check capacity at reach. Engine hoists usually lift less with the boom extended. - Measure your space. Confirm hook height, leg width and turning room. - Check the floor. Use a hard, level surface, since casters can roll or sink. - For chain hoists, rate the support. The beam or gantry must be rated for the load. ## How to use an engine hoist 1. Park on level ground and disconnect everything between engine and vehicle. 2. Attach a rated chain or load leveler at the engine's lifting points. 3. Close the release valve and pump slowly until the chain is tight. 4. Check the balance, and lift a little at a time. 5. Keep the load low when moving, and keep people clear. 6. Lower it onto an engine stand or blocks, and don't leave it hanging. ## Mistakes to avoid - Reading the wrong capacity. Check the rating at your boom setting. - Using worn chains or bolts. Use rated hardware only. - Rolling with the load high. The hoist can tip. - Working under a suspended load. Support it first. - Hanging a chain hoist from an unrated beam. Structural damage can drop the load. ## Tips before you rent - Confirm the hoist fits in your trailer or vehicle. - Ask whether a load leveler and engine stand are available. - Test the hydraulic ram before you take it home. ## How to find an engine hoist rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by type, rental length and location.
Learn more →Snow Blower Rental
A snow blower rental clears driveways, sidewalks and parking areas faster than shoveling after a heavy storm. Single-stage blowers handle light snow on paved surfaces, two-stage and three-stage machines cut through deep or wet snow, and skid steer snow blower attachments handle large lots. ## When renting a snow blower makes sense Not every home or business needs to own a snow thrower. Renting is a practical choice when a big storm is forecast, when your own machine is down, or when you only get a few heavy snowfalls a year. It also lets contractors add capacity for a busy stretch without buying another machine. Typical uses include: - Clearing driveways and walkways after a heavy storm - Clearing sidewalks for storefronts, churches and offices - Opening up parking lots and loading areas - Clearing long rural driveways and farm lanes - Removing plow windrows and packed snow at the end of a driveway ## Types of snow blowers | Type | How it works | Best for | |---|---|---| | Single-stage | Auger picks up and throws snow in one motion | Light to moderate snow on paved, smooth surfaces | | Two-stage | Auger feeds snow to a fast impeller that throws it | Deep, wet or heavy snow, longer driveways | | Three-stage | Adds an accelerator to break up and move snow faster | Heavy, icy or plow-packed snow | | Track-drive walk-behind | Two-stage blower on tracks instead of wheels | Steep or icy slopes | | Skid steer snow blower attachment | Hydraulic blower on a skid steer or tractor | Parking lots, long lanes, commercial sites | Single-stage machines touch the ground with their auger, so they are not suited to gravel driveways where they can throw stones. Two-stage machines ride on adjustable skid shoes and work on gravel when set correctly. ## How to choose the right snow blower Think about three things: snow type, surface and area. Light, powdery snow on a short paved driveway is easy work for a single-stage machine. Deep or wet snow, longer driveways and the heavy ridge left by city plows call for a two-stage or three-stage blower. For large lots, a skid steer snow blower rental moves much more snow per pass, but you need a compatible carrier with suitable hydraulics, or rent the machine and attachment together. Clearing width matters too. A wider machine clears in fewer passes but is heavier and harder to fit through gates and along narrow paths. ## Safety tips before you rent - Never reach into the chute or auger with your hands. Turn the machine off and use a clearing tool to free a clog. - Clear the area of rocks, newspapers, toys and hoses before starting. - Aim the chute away from people, cars and windows. - Wear boots with good traction, eye protection and hearing protection. - Run gas engines outdoors only, never in a closed garage. - Refuel with the engine off and cool. - Plan transport. Walk-behind blowers fit in a pickup with a ramp, while attachments and carriers usually need a trailer or delivery. ## Snow blower rental cost and how to find one near me Snow blower rental cost is set by each supplier and varies by machine type, rental length, location and delivery. Demand often spikes before a forecast storm, so it helps to book ahead. To rent a snow blower near me, search by your city and the dates you need it. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace. Compare a few suppliers' rates, pickup options and terms, then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see snow blowers for rent in your area.
Learn more →Backhoe Rental
A backhoe rental gives you one machine that digs with a rear boom and bucket and loads, grades and carries material with a front loader bucket. It suits trenching, utility work, foundations, drainage and site cleanup; a mini excavator or compact backhoe attachment can suit smaller jobs. ## What a Backhoe Is Used For A backhoe loader combines two tools: a digging arm on the back and a loader bucket on the front, mounted on a wheeled tractor frame. That makes it a versatile choice when a job involves both digging and moving material. Common uses include trenching for water, sewer, gas and electrical lines, digging footings and small foundations, installing septic systems and drainage, backfilling and grading, loading trucks, removing stumps and moving gravel or soil around a site. Because it rides on tires, a backhoe can travel between areas of a property or short distances faster than a tracked excavator. ## Types and Sizes | Type | Best for | Notes | |---|---|---| | Standard backhoe loader | Utility trenches, foundations, septic, loading | Wheeled; front loader plus rear digging arm | | Extended-reach backhoe | Deeper trenches, reaching over obstacles | Telescoping dipper arm adds reach and depth | | Compact or mini backhoe | Residential yards, tighter access | Smaller frame; less dig depth and lift | | Tractor or skid steer backhoe attachment | Occasional digging with a machine you already have | Mounts to a compact tractor or skid steer | | Mini excavator (alternative) | Tight spaces, 360-degree digging | Tracks; less disturbance to lawns | Dig depth, reach and lift capacity vary by model and size class. Ask the supplier for those figures and what bucket widths are available. ## How to Choose the Right Machine - Dig depth and trench width come first. Check what your plans require, whether that is a frost-depth water line or a septic system, and make sure the machine can reach it. - Consider the mix of tasks. If you need to dig and also move lots of material, a backhoe's front loader is a big advantage. If you only dig, a mini excavator may be easier to maneuver. - Measure access. Gates, side yards, fences and trees limit what fits. A small backhoe rental or compact attachment can reach places a full-size machine cannot. - Protect the ground. A wheeled backhoe can rut soft lawns. Ask about ground protection mats if the surface matters. - Pick the bucket. Narrow buckets suit utility trenches; wider buckets move more soil for footings and cleanup. ## Tips Before You Rent - Call 811 before you dig. Locates are free and required in most areas, and hitting a buried line can be deadly and expensive. - Trenches five feet or deeper generally require a protective system such as shoring, sloping or a trench box under OSHA rules. Never enter an unprotected trench. - Set the stabilizers and lower the loader bucket before digging with the rear boom, and work on firm, level ground. - Watch overhead power lines whenever the boom is raised. - Operators should be trained and familiar with the controls. Wear the seat belt and keep bystanders out of the swing radius. - Transport: most backhoes need a heavy trailer and a properly rated tow vehicle, so delivery is usually the practical choice. ## How to Find Backhoe Rental Near You Use the Browse equipment button to search backhoe rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including full-size backhoes, small backhoe rentals and attachments. Backhoe rental prices are set by each supplier and vary by machine size, attachments, rental length, location and delivery. Compare dig depth, bucket options, delivery and terms across a few suppliers. When you are ready to rent a backhoe, request it online and confirm delivery details with the supplier.
Learn more →Telehandler Rental
A telehandler rental gives you a rough-terrain machine with a telescoping boom that lifts pallets and materials up, out and over obstacles on a job site. Choose by lift capacity, lift height and forward reach, and make sure your operator is trained and evaluated under OSHA forklift rules before use. ## What a telehandler is used for A telehandler, also called a telescopic handler or telescopic forklift, combines the lifting of a forklift with the reach of a crane-style boom. Because the boom extends forward as well as up, it can set loads on a second-story deck, across a trench or onto a roof without the machine getting close to the edge. Common jobs include: - Lifting pallets of block, brick, roofing and lumber to upper floors - Unloading trucks on rough, unpaved job sites - Placing trusses and framing packages - Moving materials around farms, landscaping yards and storage lots - Handling bulk material with a bucket attachment ## Telehandler sizes and attachments | Size class | Typical use | |---|---| | Compact telehandler | Tight sites, residential builds, lower lift heights | | Mid-size telehandler | General construction and framing | | Large, high-reach telehandler | Commercial projects, taller buildings, heavier loads | Common attachments include carriage forks, buckets, truss booms or jibs for suspended loads, and material handling hooks. Some machines can use an approved work platform, but only with a platform and setup the manufacturer specifically allows. Most rental telehandlers in North America are fixed-boom machines. Some markets also offer rotating telehandlers that swing the boom on a turntable. ## How to choose the right telehandler Start with the load chart, not the headline numbers. A telehandler's capacity drops as the boom extends and angles out, so the weight it can handle at full reach is much less than its maximum rated capacity close in. Figure out the heaviest load you need to place, how high it goes and how far forward the machine will be from the drop point, then ask the supplier to confirm the machine's chart covers that combination. Also consider: - Ground conditions. Telehandlers are built for rough terrain, but soft or sloped ground still affects stability. - Space to maneuver. Compact machines fit tighter sites and lower clearances. - Steering modes. Many units offer front-wheel, all-wheel and crab steering for positioning in tight spots. - Attachments. Confirm the coupler and attachments you need are available with the machine. ## Safety and training before you rent - Telehandlers are rough-terrain forklifts under OSHA, so operators must be trained and evaluated on the type of machine they use. - Read the machine's load chart and keep it in the cab. - Level the frame and use stabilizers when the machine is equipped with them and the load chart calls for it. - Travel with the boom retracted and the load low. - Never lift people on forks. Use only an approved work platform where permitted. - Keep well clear of overhead power lines. - Plan transport. Most telehandlers require a trailer or supplier delivery to reach the site. ## Telehandler rental rates and how to find one near me Telehandler rental rates are set by each supplier and vary by machine size, reach, attachments, rental length, location and delivery. Weekly and monthly terms are common on construction projects. To find a telehandler for rent near me, search by city and rental dates. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace. Compare a few suppliers' rates, delivery options and terms, ask about operator orientation and damage coverage, then request the rental online and confirm the details directly with the supplier. Use the Browse equipment button to see telehandlers available in your area.
Learn more →Drain Snake Rental
A drain snake rental gives you a powered cable that cuts through clogs in sinks, tubs, floor drains and main sewer lines. Small drum augers handle household drains, while larger sewer augers clear main lines, so match the machine and cable to the pipe size and length of your run. ## What a drain snake does A drain snake, also called a plumbing snake or drain auger, feeds a flexible steel cable into a pipe. A cutting head on the end spins as the cable advances, breaking up or pulling back hair, grease, soap buildup, paper and tree roots. Renting a powered machine makes sense when a plunger or hand auger has not cleared the line, or when the clog is far down the pipe. Common jobs include: - Kitchen and bathroom sink clogs past the trap - Slow tub and shower drains - Laundry and floor drains - Main sewer line backups from the cleanout - Root intrusion in older sewer lines ## Types of drain augers you can rent | Machine | Typical use | Notes | |---|---|---| | Toilet or closet auger | Toilets | Short, hand-cranked, protects the bowl | | Handheld or small drum auger | Sinks, tubs, small drains | Thin cable, light and easy to handle | | Medium drum machine | Laundry, floor drains, small branch lines | Heavier cable, more reach | | Large drum or sewer machine | Main sewer lines from a cleanout | Long, heavy cable and cutters for roots | | Sectional machine | Main and long lines | Cable sections connect for extra length | Sewer snake rental usually means a larger drum or sectional machine. If you search for a 100 ft drain snake rental near me, you are likely dealing with a main line, so ask the supplier for a machine whose cable length and diameter suit your pipe. ## How to choose the right drain snake Match the cable to the pipe. Thin cables are made for small household drains and can kink or break in a large line. Heavy cables are made for main lines and can damage small pipes and fixtures. Tell the supplier the pipe diameter and roughly how far the clog is from the access point. Pick the right access point too. For main sewer lines, run the snake through a cleanout rather than a toilet or small fixture drain. Ask which cutting heads come with the rental, since different heads are used for soft clogs and for roots. ## Tips before you rent - Wear the gloves recommended for the machine, along with eye protection and old clothes. Drain cables are messy. - Never wear loose gloves, sleeves or jewelry near a spinning cable. - Let the cable do the work. Forcing it can cause it to kink or whip. - Run water as you work to flush debris once the line opens. - Do not use chemical drain cleaners before snaking. They can splash back on you during the job. - Ask the supplier how to operate the foot pedal and forward and reverse controls before you leave. - If the line keeps clogging, it may have a break, sag or heavy root problem that needs a camera inspection by a plumber. ## How to use a drain snake The steps below are for the powered drain machines most people rent. Read the supplier's instructions too, since controls vary. 1. Figure out where the clog is. One slow fixture usually means a branch line; several backed-up drains point to the main line, which is best reached through a cleanout. 2. Lay down a drop cloth, set out a bucket and rags, and put on safety glasses and the leather cable gloves that usually come with the machine. 3. Open the cleanout cap or trap slowly and stand to the side. A backed-up line can release dirty water under pressure. 4. Set the machine close to the opening so very little cable is exposed between them, and use a guide tube if one is provided. 5. With the motor off, feed the cable in by hand until you feel resistance. 6. Step on the foot pedal to spin the cable forward and feed it slowly. Let the cutter do the work. If the cable binds or starts to loop, take your foot off the pedal immediately. 7. Work back and forth through the blockage, then run water to confirm the line drains freely. 8. Pull the cable back out with the motor spinning forward at a slow pace, wiping it with a rag as it comes out. 9. Flush the line with plenty of water to carry away the broken-up debris. 10. Disinfect and dry the cable, cutters and drum before you return the machine. ## Mistakes to avoid - Wearing cloth gloves, loose sleeves or jewelry. A spinning cable can grab fabric and wrap around a hand. - Letting slack cable build up between the machine and the drain. It can kink, whip around or snap. - Running the motor in reverse for long stretches, which can unwind and damage the cable. - Snaking right after pouring a chemical drain cleaner. The chemicals can splash back on you and damage the cable. - Running a power auger through a toilet. It can scratch or crack the porcelain, so use a toilet auger or go in through a cleanout instead. - Trying to clear a main line clog through a sink drain, where the small pipe and the trap fight the cable the whole way. - Using a heavy main-line cable in a small sink or tub line, where it can jam in the trap. ## Pro tips - Start with a smaller cutter head to open a path, then switch to a larger one to clean the pipe wall. - Note how much cable is out when you hit the clog. It tells a plumber roughly where the problem is if it comes back. - If the clog keeps returning, or the cable brings back roots, the line may be damaged and needs a camera inspection by a plumber rather than more snaking. - Keep a garden hose nearby to rinse the cable as it comes out. For other repairs, the [plumbing tool rental](/plumbing-tool-rental/) guide covers pipe and fitting tools. If a backup has already flooded a basement, see the [pump rental](/pump-rental/) page. ## How to find drain snake rental near me To rent a drain snake near me, search by your city and the dates you need it. Jobsite Jockey shows live inventory from rental suppliers on the Derental marketplace, including handheld augers, drum machines and sewer snakes. Compare a few suppliers before you book. Rates are set by each supplier and vary by machine size, cable length, rental length, location and delivery. Ask about cutting heads, cleaning requirements on return and whether a cable is included in the base rental. Then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see plumbing snakes and sewer augers for rent in your area.
Learn more →Concrete Mixer Rental
A concrete mixer rental gives you a rotating drum that blends cement, sand, gravel and water into consistent concrete right where you are pouring. Size the mixer to your batch and project, plan your water and power, and compare a few suppliers. ## What a concrete mixer is used for Mixing concrete by hand in a wheelbarrow works for a fence post or two, but anything bigger turns into hard labor with uneven results. A cement mixer rental tumbles the ingredients in a drum so every batch comes out evenly blended, and lets one or two people keep a steady supply of concrete moving. Typical jobs include setting fence and deck posts, pouring footings and pier blocks, small slabs and pads for sheds and AC units, walkways and steps, repairs to driveways and patios, and masonry projects. Contractors keep a mixer on site for jobs that need many small batches or where a ready-mix truck cannot reach. ## Types of mixers | Type | Best for | |---|---| | Small electric drum mixer | Light homeowner jobs, bagged concrete, posts and small repairs | | Gas or larger electric drum mixer | Footings, pads and steady batching on bigger jobs | | Towable concrete mixer | Larger batches, frequent use, moving between job sites | | Mortar or mud mixer (paddle style) | Mortar, stucco, plaster and grout for masonry and tile work | | Concrete mixer truck | Large pours; usually replaced by ordering ready-mix delivery | Drum mixers tumble material and handle concrete with gravel. A mud mixer rental uses horizontal paddles that work stiffer, smoother materials like mortar and plaster better than a drum. A portable concrete mixer rental, small enough to load in a pickup or tow on a small trailer, covers most homeowner work. For large slabs and foundations, a full-size concrete mixer truck rental is rarely practical. Those trucks are heavy commercial vehicles that typically require a commercial driver's license, and most people simply order ready-mix concrete delivered by a supplier instead. ## How to choose the right concrete mixer - Estimate your volume. Add up the cubic feet or yards for the whole job and decide how many batches you will mix. If the total is large, compare mixing on site with ordering ready-mix. - Match drum size to your crew. A bigger drum means fewer batches, but someone has to load it and move the concrete before it sets. - Pick a power source. Electric mixers are quieter and fine near an outlet. Gas mixers work anywhere on site. - Consider what you are mixing. Concrete with gravel goes in a drum mixer; mortar and plaster go in a paddle mixer. ## Tips before you rent - Stage materials. Have bags, sand, gravel, water and wheelbarrows lined up before you start, so batches flow without delays. - Follow the mix instructions on your bagged material and add water gradually to get a workable consistency. - Wear PPE. Wet concrete is caustic. Use gloves, eye protection and long sleeves, and wash skin promptly if it contacts concrete. Wear a dust mask when emptying cement bags. - Keep hands and tools out of the turning drum, and set the mixer on firm, level ground. - Clean as you go. Rinse the drum between pours and thoroughly at the end of the day so concrete does not harden inside. - Plan transport. Towable mixers need a proper hitch and lights; smaller units need ramps and help to load. ## How to find a concrete mixer rental near me Rates are set by each supplier and vary by mixer type and size, power source, rental length, location and delivery. Daily and weekly periods are common. To rent a cement mixer near me, use the Browse equipment button to search by your city and rental dates. You will see live concrete mixer for rent listings from rental suppliers on the Derental marketplace. Compare a few options on drum size, power, towing or delivery, and each supplier's terms, then request the mixer online.
Learn more →Ladder Rental
A ladder rental gives you the right height for gutters, roof access, siding or high windows without buying and storing a long ladder. Most renters need an extension ladder sized to reach about three feet past the roof edge. ## When to Rent a Ladder Most households own a short stepladder, but taller jobs come up only now and then: cleaning gutters on a two-story house, getting onto a roof, painting fascia and soffits, replacing exterior lights, trimming branches, hanging holiday lights or reaching high interior walls and ceilings. Renting the right length is safer than stretching a short ladder, standing on the top rungs or stacking it on something to gain height. For long jobs at height, consider scaffolding or a lift instead. ## Types and Sizes | Ladder type | Typical use | Notes | |---|---|---| | Stepladder | Interior ceilings, light fixtures, low exterior work | Self-supporting; never stand on the top cap or top step | | Extension ladder | Gutters, roofs, siding, second stories | Leans against a structure; sections slide to adjust length | | Multi-position or articulating ladder | Stairs, uneven areas, versatile use | Converts between step, extension and other shapes | | Platform ladder | Longer tasks at moderate height | Standing platform with guardrail | | Ladder hoist | Moving shingles and materials to a roof | Powered lift that rides a ladder-style rail | Extension ladders are sold by overall length, but the usable reach is shorter because sections overlap and the ladder leans at an angle. That is why a 30 ft ladder rental might suit a typical two-story eave, while higher roofs may call for a 40 foot ladder rental. Ask the supplier for the ladder's maximum working length. ## How to Choose the Right Ladder - Measure the height you need to reach, then add about three feet so the ladder extends above the roof edge or landing. - Check the duty rating. Ladders are rated for a maximum load, including you, your clothing, tools and materials. Common ratings run from Type III for light household use up to Type IA and IAA for heavy professional use. - Pick the material. Fiberglass ladders do not conduct electricity and are the safer choice near wiring. Aluminum ladders are lighter but conductive. - Consider transport. A tall ladder is long even when collapsed. Make sure you have a roof rack, ladder rack or truck bed that can carry it securely, or ask about delivery. ## Tips Before You Rent - Use the 4-to-1 rule for extension ladders: for every four feet of height to the support point, set the base about one foot out from the wall. - Set the feet on firm, level ground. Use levelers, not boards or bricks, on uneven surfaces. - Keep three points of contact while climbing, face the ladder, and keep your belt buckle between the rails. Do not overreach; move the ladder instead. - Stay well clear of overhead power lines, and use fiberglass anywhere near electrical hazards. - Secure the top and bottom when possible, and have a helper foot the ladder on tall setups. - Inspect rungs, locks, rope, pulleys and feet before use. Do not use a damaged ladder. - On job sites, OSHA ladder rules apply, and employers must train workers on ladder hazards. ## How to Find Ladder Rental Near You Use the Browse equipment button to search ladder rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including extension ladder rental options, tall ladders, stepladders and ladder hoists for roofing work. Compare length, duty rating, material and whether delivery is offered. Rates are set by each supplier and vary by ladder type and length, rental length, location and delivery. Once you have found the right ladder for rent near you, request it online and confirm pickup details with the supplier.
Learn more →Wheel Loader & Front End Loader Rental
A wheel loader rental moves and loads large amounts of gravel, soil, mulch and snow with a big front bucket. Choose the bucket size and machine class by the material and your trucks, then compare suppliers for your dates. ## What a wheel loader is used for Wheel loaders, also called front end loaders, load trucks, stockpile material, move gravel and mulch, clear snow and carry pallets with forks. For tight sites, a [skid steer rental](/skid-steer-rental/) is smaller. For digging, see the [backhoe](/backhoe-rental/) and [excavator](/excavator-rental/) guides. ## Types of loaders | Type | Best for | |---|---| | Compact wheel loader | Landscaping, yards and tight sites | | Mid-size wheel loader | Gravel yards and general construction | | Large wheel loader | Quarries and high-volume truck loading | | Tractor loader | Farms and light material moving | | Track loader | Soft ground and pushing material | ## How to choose the right loader - Match bucket size to your trucks. A few full passes per load is efficient. - Check the lift height. It must clear the side of your trucks. - Pick attachments. Forks, grapples and snow buckets widen what it can do. - Consider the ground. Wheels suit hard surfaces, while tracks suit soft ground. - Plan transport. Larger loaders need heavy trailers. ## How to use a wheel loader safely 1. Do a daily check of tires, hydraulics, lights and the backup alarm. 2. Wear the seat belt and keep the bucket low when traveling. 3. Approach piles straight on and fill the bucket evenly. 4. Keep people well away from the work area. 5. Travel slowly on slopes with the load low. 6. Lower the bucket to the ground when parked. ## Mistakes to avoid - Driving with the bucket raised. It reduces visibility and stability. - Overloading the bucket. Heavy material can exceed the rated load. - Turning sharply on slopes. Loaders can tip. - Ignoring blind spots. Use a spotter in busy yards. - Loading trucks unevenly. It can overload axles. ## Tips before you rent - Know the material and how many loads you need to move. - Ask about attachments and bucket sizes. - Confirm delivery and pickup. ## How to find a wheel loader rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine size, rental length and location.
Learn more →Pole Pruner Rental
A pole pruner rental lets you cut high branches from the ground without climbing a ladder. Choose a gas, battery or manual model based on branch size and reach, and compare suppliers for your dates. ## What a pole pruner is used for Pole pruners, also called pole saws, trim overhanging limbs, clear roofs and drive paths, and shape trees. For larger cuts on the ground, see the [chainsaw rental](/chainsaw-rental/) guide. To clear the branches you cut, see the [wood chipper rental](/wood-chipper-rental/) guide. ## Types of pole pruners | Type | Best for | |---|---| | Gas pole saw | Longer jobs and thicker limbs | | Battery pole saw | Quieter, lighter trimming | | Electric pole saw | Small yards with nearby power | | Manual pruner | Light cuts and small branches | | Extended-reach pruner | Higher limbs, with more weight to control | ## How to choose the right pole pruner - Measure the reach. Compare the limb height to the tool's extended reach and your own height. - Check the bar length. It limits branch size. - Consider the weight. Long poles get tiring and hard to control. - Look at the power type. Quiet battery models suit neighborhoods. - Ask about oil and fuel. Chain oil and any fuel mix should be clear before you leave. ## How to use a pole pruner 1. Check for power lines, and stay well away from them. 2. Clear the drop zone and wear a helmet, eye and ear protection and gloves. 3. Stand off to the side of the limb, never directly under it. 4. Make a small undercut first, then finish with a top cut. 5. Let the saw do the work, and don't overreach. 6. Shut it off before you set it down or check the chain. ## Mistakes to avoid - Working near power lines. Poles and branches can conduct electricity. - Standing under the branch. Cut limbs can swing and fall. - Cutting from a ladder. Pole saws are meant to keep you on the ground. - Skipping the undercut. Bark can tear down the trunk. - Taking on large limbs. Hire an arborist for big or risky trees. ## Tips before you rent - Bring the height and diameter of your largest limb. - Check the chain's sharpness and oil level. - Plan how you'll clear the branches afterward. ## How to find a pole pruner rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by type, rental length and location.
Learn more →Floor Scrubber & Buffer Rental
A floor scrubber rental cleans warehouses, shops, stores and other hard floors far faster than a mop, while a buffer polishes or strips them. Choose by floor size, floor type and power source, then compare suppliers for your dates. ## What a floor scrubber is used for Scrubbers wash and dry concrete, tile and sealed floors in warehouses, gyms, stores and after construction. Buffers and polishers maintain finished floors, strip old wax with the right pad and restore shine. To remove coatings from concrete, see the [concrete grinder rental](/concrete-grinder-rental/) guide. To refinish wood, see the [floor sander rental](/floor-sander-rental/) guide. ## Types of machines | Type | Best for | |---|---| | Walk-behind scrubber | Stores, schools and medium warehouses | | Ride-on scrubber | Large warehouses and plants | | Micro or compact scrubber | Tight rooms and small commercial spaces | | Low-speed buffer | Scrubbing, stripping and general floor care | | High-speed burnisher | Polishing finished floors | ## How to choose the right machine - Measure the floor. Square footage and aisle width decide the machine size. - Know the surface. Match brushes and pads to concrete, tile or finished flooring. - Pick the power. Batteries avoid cords, while corded machines suit smaller areas. - Check the tanks. Larger tanks mean fewer stops to dump and refill. - Ask about chemicals. Use cleaners approved for the machine and floor. ## How to use a floor scrubber 1. Sweep up loose debris first. 2. Fill the solution tank and add the correct cleaner. 3. Lower the brush and squeegee, and test in a small area. 4. Work in straight, slightly overlapping passes. 5. Empty the recovery tank often, and post wet floor signs. 6. Rinse tanks and clean the squeegee before return. ## Mistakes to avoid - Skipping the sweep. Debris can clog hoses and scratch floors. - Using the wrong pad. Aggressive pads can damage finishes. - Using too much chemical. It leaves residue and can cause foam problems. - Dumping wastewater outside. Use a proper drain as local rules require. - Letting a battery run flat. Ask the supplier about charging. ## Tips before you rent - Share your floor type and square footage with the supplier. - Confirm that pads, brushes and a charger are included. - Check door widths and elevator limits. ## How to find a floor scrubber rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Lawn & Landscape Equipment Rental
Landscaping equipment rental covers the machines to mow, cut, dig, grind and chip your way through a yard or property. Choose by the job and your access, then compare suppliers for your dates and request online. ## What this equipment is used for Homeowners and crews rent this equipment for lawn renovations, tree cleanup, new beds, sod installs and clearing overgrown land. Start with the guide for your job: [lawn mower](/lawn-mower-rental/), [aerator](/aerator-rental/), [dethatcher](/dethatcher-rental/), [sod cutter](/sod-cutter-rental/), [tiller](/tiller-rental/), [brush cutter](/brush-cutter-rental/), [wood chipper](/wood-chipper-rental/), [stump grinder](/stump-grinder-rental/) or [chainsaw](/chainsaw-rental/). ## Equipment by job | Job | Machine | |---|---| | Thick, compacted lawn | Aerator, dethatcher | | Replace a lawn | Sod cutter, tiller | | Overgrown lot | Brush cutter, forestry mulcher | | Tree cleanup | Chainsaw, wood chipper, log splitter | | Stump removal | Stump grinder | | Fence or planting holes | Post hole digger | | Moving soil and rock | Skid steer, mini excavator, dump trailer | ## How to choose the right machine - Start with the outcome. Clearing, digging and finishing use different machines. - Measure your access. Gate and side yard width often decide your machine. - Match the job size. Bigger machines finish faster but cost more to rent and move. - Check your ground. Slopes and soft soil limit what's safe to run. - Bundle your dates. Many projects use several machines, so group them to reduce trips. ## How to plan a landscaping project 1. Mark your property lines, irrigation and any utilities before digging. 2. Clear brush and trees first, so that later machines have access. 3. Grade and prepare soil. 4. Install irrigation and hardscape. 5. Finish with plants, sod or seed, and water according to local rules. ## Mistakes to avoid - Skipping utility marking. Many landscaping jobs go deep enough to hit a line. - Renting too small. Small machines struggle on thick brush and hard soil. - Forgetting hauling. Brush, soil and sod all need somewhere to go. - Running machines on steep slopes beyond their limits. - Skipping protective gear. Chaps, eye and ear protection, and sturdy boots make a difference. ## Tips before you rent - Ask for a quick demonstration at pickup. - Check fuel type and return requirements. - Confirm you can transport it, or request delivery. ## How to find landscaping equipment near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Generator & Light Tower Rental
A generator rental gives you temporary power for jobsites, events, outages and remote work, and a light tower keeps the area lit after dark. Add up your running watts and the starting surge of your largest motor, size up from there, and compare suppliers before you book. ## What generators and light towers are used for Contractors rent generators to run saws, compressors, heaters and site trailers before permanent power is connected. Event planners use them for stages, food vendors and lighting. Homeowners rent them to ride out a power outage or run tools far from an outlet. Larger towable diesel units power whole buildings during electrical work or keep critical equipment running during a planned shutdown. Light towers are mobile masts with a bank of lights, usually on a trailer with their own generator or a battery and solar setup. They light night road work, parking lots, outdoor events, emergency response and any jobsite that runs past sunset. Light stands are smaller versions for indoor or tighter spaces. ## Types and sizes | Type | Best for | |---|---| | Portable gas | Power tools, small jobs, home outage backup for a few circuits | | Inverter | Quiet, clean power for electronics, RVs, events and food trucks | | Towable diesel | Jobsites, buildings, large events, long run times | | Natural gas or propane | Long-running jobs where those fuels are available | | Battery storage and hybrid | Quiet sites, noise-sensitive areas, cutting fuel use | | Light tower | Night work, parking areas, events, emergency lighting | | Load bank | Testing a building's own generator under load | Fuel containment berms and fuel tanks are often available alongside the bigger units and may be required on some sites. ## How to choose the right generator - List every load. Write down the running watts of each tool or appliance you will run at the same time, then add the starting surge of the largest motor, such as a compressor, pump or air conditioner. - Match the voltage and phase. Small jobs use standard 120-volt outlets. Shops, buildings and big motors may need 240-volt or three-phase power, so tell the supplier exactly what you are connecting. - Check the outlets. Portable units have household and twist-lock outlets; large units often connect through a distribution panel or cables that an electrician should hook up. - Think about run time and fuel. Ask how long a tank lasts at your load and whether the supplier offers refueling service for long rentals. - Consider noise. Inverters, battery units and sound-attenuated diesels make sense near homes, events and anywhere with noise limits. - For light towers, compare mast height, LED versus older lamp types, how the tower is powered and how long it runs per tank or charge. ## How to use a generator 1. Place the generator outdoors on level ground, well away from doors, windows and vents, with the exhaust pointed away from people and buildings. 2. Ground it as the manufacturer and supplier direct. 3. Check fuel and oil before starting. Never refuel while it is running or hot. 4. Start it with nothing plugged in and let it warm up for a minute. 5. Plug in the largest motor load first, then add smaller loads one at a time. 6. Use outdoor-rated extension cords heavy enough for the load and the length of the run, and use GFCI protection, especially in wet conditions. 7. Keep an eye on the load. If breakers trip or the engine labors, unplug something. 8. To shut down, switch off or unplug the loads first, then turn off the generator and let it cool before refueling or loading it up. ## Mistakes to avoid - Running a generator indoors, in a garage, a basement or a crawl space, even with the door open. Carbon monoxide builds up fast and can kill without warning. A battery-powered CO alarm in the home is a smart backup. - Plugging a generator into a house outlet to backfeed the panel. Without a transfer switch installed by an electrician, it is dangerous, illegal in most places and can electrocute utility workers. - Sizing only for running watts and forgetting starting surge, so the unit stalls every time the compressor or pump kicks on. - Using thin indoor extension cords that overheat and drop voltage on long runs. - Refueling a hot engine and spilling fuel onto the muffler. - Running a generator exposed in the rain instead of under a cover made for it that still leaves it in open air. ## Pro tips - Sizing up a step gives you headroom and keeps the engine from running at full load all day. - Put the generator downwind from where people work or gather so exhaust and noise drift away from them. - On a light tower, aim the lights down at the work area and away from traffic and neighbors to cut glare. - For multi-day rentals, ask whether the unit has a fuel gauge or hour meter, and track fuel use on the first day so you can plan refills. If you are heating a cold jobsite, see the [construction heater rental](/construction-heater-rental/) guide for heaters to pair with your generator. For lighting-only jobs, the [light tower rental](/light-tower-rental/) page goes into more detail. ## Tips before you rent - Confirm whether delivery includes setup and whether an electrician is needed to connect larger units. - Ask what cables, distribution boxes or adapters come with the generator and what costs extra. - Check whether the unit should come back full of fuel, and how refueling is handled on long rentals. - Make sure there is a level, accessible spot for a towable unit or light tower, with room for the delivery truck. - Ask about noise levels if you are near homes or working at night. ## How to find a generator rental near you Rates are set by each supplier and vary by size, fuel type, rental length, accessories, location and delivery. Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery options and rates, check the output and outlet details on each listing, and request the rental online once you have your load list in hand.
Learn more →Post Hole Digger & Auger Rental
Renting a post hole digger turns a day of shovel work into an hour or two, boring clean holes for fence posts, deck footings and plantings. Choose a one-person, two-person, towable or skid steer-mounted auger based on hole count, diameter and soil. ## What a Post Hole Auger Is Used For A post hole auger spins a spiral steel bit into the ground and lifts the soil out as it goes. It is the standard tool for fence lines, deck and porch footings, pergolas, sign posts, tree and shrub planting, and pier holes for sheds. If you only need two or three shallow holes in soft soil, a manual clamshell digger may be enough. Once you are into a full fence line, or the ground is packed clay, an auger rental pays for itself in time and sore shoulders. ## Types of Augers You Can Rent | Type | Best for | Notes | |---|---|---| | One-person handheld | Small holes, light soil, a handful of posts | Light and easy to transport, but torque kicks back to the operator | | Two-person handheld | Larger diameters, firmer soil | Two operators share the torque; safer on bigger bits | | Towable or hydraulic auger | Long fence lines, many holes | Hydraulic power with a frame that absorbs the reaction force | | Skid steer or tractor attachment | Big jobs, footings, rocky or hard ground | Requires a carrier machine with matching hydraulics | Bits are swapped by diameter. Common sizes run from a few inches for small posts up to a foot or more for footings and tree planting. Ask the supplier which bit sizes are available with the powerhead you are renting. ## How to Choose the Right Auger Start with the hole spec your project calls for. Fence posts are usually set in holes about three times the post width, and depth is often around a third of the post's above-ground height or below your local frost line, so check your local building requirements for footings. Then match the machine to the job: - A few holes in loose or sandy soil: a one-person auger is usually fine. - Dozens of holes or bits larger than about eight inches: step up to a two-person, towable or hydraulic unit. - Clay, roots or rock: a hydraulic auger or skid steer attachment handles the resistance far better, and a rock or carbide-tipped bit helps. - Tight backyard access: measure gate widths before booking anything towable. When you rent an auger for a long fence line, plan the layout with string and stakes first so every hole is marked before the machine arrives. ## Tips Before You Rent - Call 811 a few days before you dig. Utility locating is free, it is required in most areas, and striking a gas or electric line with an auger is extremely dangerous. - Walk the line and pull up sprinkler heads, landscape lighting wire and large stones. - Wear gloves, eye protection, hearing protection and sturdy boots. Avoid loose clothing that can catch on a spinning bit. - Handheld augers can twist hard when the bit binds on a root or rock. Keep a firm stance, let off the throttle immediately if it grabs, and never wrap the cord or your arm around the handle. - Lift the bit out every few inches to clear soil rather than drilling the full depth in one pass. - Confirm fuel type, how the bit attaches, and whether the supplier includes an extension for deeper holes. - Towable units need a hitch and safety chains on your vehicle; ask about the coupler size. ## How to Find Post Hole Digger Rental Near You Use the Browse equipment button to search post hole digger rental by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, so you can compare a few options side by side. Look at what is included, such as the bit sizes, extensions and whether delivery is available, along with each supplier's terms and pickup hours. Rates are set by each supplier and vary with the auger type, bit diameter, rental length, location and delivery. Half-day and daily options are common for small fence jobs, while weekly terms can make sense for long runs or multiple projects. Once you have picked an auger rental near me that fits the job, you can request it online and confirm the details directly with the supplier.
Learn more →Dehumidifier & Air Scrubber Rental
A dehumidifier rental pulls moisture out of the air to dry water-damaged rooms, damp basements and job sites with high humidity. Air scrubbers and ozone generators handle dust, mold spores and odors, so many drying and cleanup jobs use more than one machine at a time. ## When to rent a dehumidifier or air scrubber Renting makes sense when you need serious drying or air cleaning for days or weeks, not the light duty a household unit handles. Commercial machines remove far more moisture and move far more air than typical home models. Common uses include: - Drying out after a leak, flood or burst pipe - Controlling humidity in basements, crawlspaces and storage areas - Speeding up drying of drywall mud, paint, plaster and flooring adhesives on construction projects - Protecting stored materials and equipment from moisture - Capturing dust during renovation and demolition with an air scrubber - Cleaning the air during mold remediation - Treating smoke and odor problems in empty spaces with an ozone machine ## Types of machines you can rent | Machine | What it does | Good for | |---|---|---| | Refrigerant dehumidifier | Condenses moisture on cold coils | Warm, damp spaces, most water damage | | Low-grain refrigerant (LGR) dehumidifier | Pulls air drier than standard refrigerant units | Restoration and deep drying | | Desiccant dehumidifier | Absorbs moisture with a desiccant material | Cold spaces and very low humidity targets | | Air scrubber | Filters air through a HEPA filter; can create negative pressure | Dust control, mold remediation | | Ozone generator | Produces ozone to break down odor molecules | Odor treatment in unoccupied spaces | Drying jobs usually pair dehumidifiers with air movers. The fans pull moisture from wet materials into the air, and the dehumidifier removes it. ## How to choose the right equipment For a commercial dehumidifier rental, size the machine to the space and how wet it is. A flooded basement needs more capacity than a damp storage room. Temperature matters too: refrigerant units lose efficiency in cold spaces, where a desiccant unit often works better. Ask the supplier to help match capacity to your square footage, temperature and water source. Also check how each unit drains. Many commercial dehumidifiers have a pump and hose to send water to a sink or floor drain, so you are not emptying a bucket. For air scrubbers, confirm filter types and whether you need ducting to exhaust air outside for negative pressure. If you rent an ozone machine, plan for the space to be empty during treatment. ## Safety tips before you rent - Ozone is harmful to breathe. People, pets and plants must be out of the space during treatment, and it must be ventilated before anyone returns. Follow the supplier's instructions exactly. - Turn off power to wet areas and have an electrician check before running equipment if water reached outlets or wiring. - Use GFCI-protected circuits in damp areas. - Wear an appropriate respirator, gloves and eye protection around mold and contaminated water. - Large mold growth or sewage water is usually a job for a professional remediation contractor. - Keep cords out of standing water and walkways. - Check your insurance policy if the drying is part of a claim. ## How to find dehumidifier rental near me To find a dehumidifier for rent near me, search by city and the dates you need the equipment. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace, including dehumidifiers, air scrubbers and air movers. Compare a few suppliers. Rates are set by each supplier and vary by machine type and size, number of units, rental length, location and delivery. Ask about hoses, filters and pickup, then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see dehumidification equipment available in your area.
Learn more →Light Tower Rental
Light tower rentals put bright, elevated light over job sites, events, parking areas and emergency scenes after dark. Most are towable units with a telescoping mast, powered by a built-in diesel generator or by solar panels and batteries. ## What a Light Tower Is Used For A light tower, also called a light plant, lifts a bank of lamps on a mast high above the work area to light a wide space evenly. Common uses include night shifts and early mornings on construction and road jobs, outdoor events and festivals, parking lots, sports fields, oil and gas or mining sites, film shoots, and storm or emergency response. Compared with clamp lights and work lamps on stands, a portable light tower covers far more ground, reduces shadows and keeps cords off the walkways. ## Types of Light Towers | Type | Power | Best for | |---|---|---| | Diesel light tower | Onboard diesel generator | Long nights, remote sites, heavy-duty use; some units can also power tools | | Solar light tower | Solar panels and battery bank | Quiet, fuel-free operation for sites with good daytime sun | | Electric or plug-in tower | External power source | Sites with access to grid power or an existing generator | | Compact or portable tower | Varies | Tight sites, small events, areas a towable unit cannot reach | Lamps are commonly LED or metal halide. LED fixtures generally use less fuel or battery and turn on instantly, while metal halide lamps need a warm-up period. Mast heights and coverage areas vary, so ask the supplier what area a unit is designed to light. ## How to Choose the Right Light Tower - Measure the area. Larger sites need more towers or taller masts. Plan placement so light overlaps and avoids dark pockets. - Decide on power. A diesel light tower rental is the dependable default for long runs. A solar unit avoids fuel and noise, which suits events and residential neighborhoods. A generator light tower rental with auxiliary outlets can double as a small power source on some models. - Consider noise and fumes. Near homes, hospitals or events, quieter diesel units or solar towers keep complaints down. - Think about runtime. Ask how long a tank or a full charge typically lasts so you can plan refueling. - Check access. Towers are usually towed into place; confirm the site can take a trailer and that the ground is firm and level. ## Tips Before You Rent - Towing: check the hitch type, coupler size and that your vehicle can handle the weight. Ask whether the supplier can deliver and set up the tower instead. - Set up on level ground, deploy and pin the outriggers or stabilizers before raising the mast, and lower the mast in high winds per the unit's instructions. - Look up before raising. Keep the mast well clear of overhead power lines. - Aim lights away from roads and neighbors to avoid glare, and keep drivers' sightlines in mind on road work. - Refuel only with the engine off and cooled, and keep a spill kit nearby on sensitive sites. - Ask the supplier how to operate timers or automatic dusk-to-dawn controls if the unit has them. ## How to Find Light Tower Rentals Near You Use the Browse equipment button to search light tower rentals near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including diesel light plant rental options, solar towers and compact portable units. Compare lamp type, mast height, power source, runtime and whether delivery and setup are offered. Rates are set by each supplier and vary by tower type, rental length, location and delivery. A night or weekend rental can cover an event, while weekly or monthly terms suit ongoing night work. Once you have picked a light tower rental that fits, request it online and confirm delivery details with the supplier.
Learn more →Concrete Pump & Concrete Truck Rental
A concrete pump rental moves concrete from the truck to where you need it, and a concrete truck delivers and mixes it. Most pumps and trucks come with an operator or driver, so plan your volume and access first. We are still adding suppliers, so send a request with your details. ## What concrete pumps and trucks are used for Pumps place concrete for slabs, footings, walls and upper floors when a truck can't reach the pour. Concrete trucks, also called cement or ready-mix trucks, mix and deliver concrete, usually from a ready-mix plant. For smaller pours you mix yourself, see the [concrete mixer rental](/concrete-mixer-rental/) guide. ## Types | Type | Best for | |---|---| | Boom pump truck | Large slabs, walls and upper floors | | Line pump | Smaller pours, footings and backyards | | Ready-mix truck delivery | Most residential and commercial pours | | Volumetric mixer truck | Mixing on site in exact amounts | | Towable mixer | Small batches you mix yourself | ## How to choose - Work out the volume. Your concrete supplier can help you estimate yards. - Measure the distance. Hose or boom reach must cover the pour from where the pump can park. - Check access. Pumps and trucks need firm ground and room for outriggers. - Book the concrete and pump together. Timing is everything on pour day. - Ask about the operator. Most pumps and trucks come with one. ## How a pumped pour works 1. Confirm the mix, volume and pour time with your concrete supplier. 2. Book the pump for the same time and share access details. 3. Prepare forms, reinforcement and a washout area. 4. Keep enough crew to place and finish the concrete. 5. Coordinate truck arrivals so the pump doesn't run dry. 6. Clean up and contain washout water. ## Mistakes to avoid - Underestimating volume. Running short mid-pour causes problems. - Ignoring access. Soft ground and overhead lines can stop a pump. - Booking the pump and concrete separately without coordinating. - Skipping washout planning. Washout water can't go into drains. - Too few finishers. Concrete won't wait. ## Tips before you request - Have your address, pour date, volume and distance from the street ready. - Ask about minimum charges and travel time. - Ask who handles traffic or street permits. ## How to request a concrete pump or truck Use the Request a rental button and tell us your city, date, volume and access. We are still adding suppliers in this category and will follow up with what's available. Rates are set by each supplier and depend on pump size, hours, travel and concrete volume.
Learn more →Crane & Boom Truck Rental
A crane rental lifts loads too heavy or too high for a forklift or telehandler, from roof units and steel beams to precast panels. Have your heaviest load, lift radius and site access ready, and ask whether you need an operated rental. We are still adding crane suppliers, so send a request with your details. ## What a crane is used for Cranes set steel, trusses, precast walls, HVAC units, generators, boats and machinery. Boom trucks and knuckleboom trucks handle lighter lifts and can carry their own load. For material placement at lower heights and short reach, a [telehandler rental](/telehandler-rental/) may do the job at far lower cost. ## Types of cranes | Type | Best for | |---|---| | Boom truck | Quick, lighter lifts where road travel matters | | Knuckleboom truck | Placing materials over walls and into tight spots | | Carry deck crane | Moving loads around plants and yards | | Rough terrain crane | Unpaved construction sites | | All terrain crane | Heavy lifts with road travel between sites | | Crawler crane | Long projects and very heavy lifts | | Tower crane | High-rise work over a long schedule | ## How to choose the right crane - Weigh the load. Include rigging, and get the real weight rather than a guess. - Measure the radius. Capacity falls quickly as the load moves away from the crane, so radius matters as much as weight. - Check the height. Confirm the boom clears the building and any obstacles. - Walk the setup area. The crane needs firm, level ground, room for outriggers and clear overhead lines. - Decide on operated or bare. Most short jobs are booked with an operator, and the supplier can tell you what they offer. ## How a crane lift works 1. Gather the load weight, dimensions, pick points and set location. 2. Share them with the supplier, who can help match a crane to the lift. 3. Confirm the permits and street closures your city requires. 4. Prepare the ground, and clear the setup area and swing path. 5. On the day, hold a short meeting so everyone knows the plan and the signal person. 6. Lift slowly, keep people out from under the load and stop if conditions change. ## Mistakes to avoid - Guessing at the weight. A wrong number can overload the crane. - Ignoring radius. A lift that works close in may be well beyond capacity farther out. - Setting up on soft ground. Buried voids and fresh backfill can give way under outriggers. - Forgetting overhead lines. Power line contact is one of the deadliest crane hazards. - Lifting in high wind. Large panels catch wind and swing. Follow the crane's limits. ## Tips before you request - Have site photos, a drawing with distances and your preferred dates ready. - Ask how minimum charges and travel time work. - Ask who handles the lift plan, rigging and permits. - Allow time for permits if the crane will sit on a public street. ## How to request a crane Use the Request a rental button to send your load weight, lift radius, city and dates. We are still adding crane suppliers to the marketplace, so we will follow up with what is available. Rates are set by each supplier and depend on crane size, hours, travel and rigging.
Learn more →Scissor Lift & Boom Lift Rental
A scissor lift rental gives you a stable work platform that rises straight up for ceiling, wall and overhead work, indoors or outdoors. Choose electric for smooth indoor floors or rough terrain for outdoor sites, and make sure operators are trained before you book. ## What a scissor lift is used for Scissor lifts raise one or more workers and their tools on a wide, railed deck. Contractors use them for installing lighting, ductwork, sprinkler pipe and drywall ceilings, painting high walls, hanging signs, cleaning warehouse fixtures and stocking high shelves. Event crews use them to rig lighting and banners. Because the deck is roomy, they are often safer and faster than a ladder or rolling scaffold for overhead work that takes more than a few minutes. A scissor lift only goes straight up. If you need to reach up and out over an obstacle, a roofline or a vehicle, you need a boom lift instead. See the [boom lift rental](/boom-lift-rental/) guide for articulating, telescopic and towable booms. ## Types and sizes | Type | Best for | |---|---| | Compact electric (slab) | Indoor work on flat floors, narrow doorways and aisles | | Larger electric (slab) | Warehouses and big indoor spaces that need more deck room | | Rough terrain | Outdoor jobsites, gravel, dirt and uneven ground | | Mast lift | One person, very tight spaces, light overhead tasks | Mast lifts, sometimes called personnel lifts, are vertical lifts with a small platform for a single worker. They fit through standard doors and into spaces a scissor lift cannot, but carry less weight and less material. ## How to choose the right scissor lift - Work out your height. Measure to where you need to work, then compare that to the platform height listed by the supplier. - Check the deck and capacity. Count people, tools and materials, and make sure the total stays under the rated load. - Measure the access route. Doorways, elevators, aisles and gates all limit how wide and tall the stowed lift can be. - Check the floor. Slab lifts need a firm, level surface; anything soft, sloped or rough calls for a rough terrain model. - Electric versus fuel. Electric units are quiet and emission-free, so they suit indoor work. Fuel-powered rough terrain units belong outdoors. - Indoor or outdoor rating. Some slab lifts are rated for indoor use only because of wind. Check the decal or ask the supplier. ## How to use a scissor lift 1. Make sure every operator has been trained. OSHA requires employers to train workers who operate aerial lifts, and the operator should also be familiarized with this specific machine. 2. Do a pre-use check: tires, guardrails, gate, controls, emergency stop, battery charge or fuel, and any leaks. 3. Inspect the work area for holes, slopes, drop-offs, debris and overhead hazards, and keep well clear of power lines, at least 10 feet and more for higher voltages. 4. Close the entry gate or chain, keep both feet on the deck and follow the manufacturer's and supplier's fall protection guidance. 5. Test the controls at ground level: drive, steer, raise, lower and the emergency stop. 6. Raise the platform only on firm, level ground, and drive slowly while elevated, only where the machine allows it. 7. Lower fully before driving any distance, on any slope or near edges. 8. When finished, lower the platform, park on level ground, turn off the key and plug an electric unit in to charge if the supplier asks. ## Mistakes to avoid - Standing on the guardrails or putting a ladder or bucket on the deck to reach higher. That defeats the guardrails and is a common cause of falls. - Driving with the platform raised over uneven ground, near holes or across a ramp, which can tip the lift. - Overloading the deck with drywall, pipe or tools beyond the rated capacity. - Using an indoor-only slab lift outside on a windy day. - Forgetting overhead clearance and pinning yourself or the deck against beams, ductwork or a ceiling. - Leaving the gate open or climbing in and out while the platform is raised. ## Pro tips - Load materials before you go up and organize them so you are not leaning over the rail to reach them. - Plan your work in rows so you lower, move and raise as few times as possible. - On electric lifts, charge overnight every night of the rental. A dead battery mid-ceiling can cost you half a day. - Put down floor protection on finished floors and ask the supplier for non-marking tires. For quick tasks or tight stairwells, a [scaffolding rental](/scaffolding-rental/) can be a better fit. If the job is hanging sheets of ceiling drywall, look at a [drywall lift rental](/drywall-lift-rental/) as well. ## Tips before you rent - Confirm delivery, unloading and pickup times, and whether someone must be on site to receive the lift. - Ask whether the supplier offers a familiarization walkthrough at drop-off. - Check that the lift fits through every doorway and elevator on the way to the work area. - Ask about charging for electric units and fueling for rough terrain units. - Have a ground person on hand to watch for traffic, overhead hazards and people walking under the platform. ## How to find a scissor lift rental near you Rates are set by each supplier and vary by platform height, power type, rental length, location and delivery. Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery options and rates, check the platform height and capacity on each listing, and request the rental online.
Learn more →Lawn Aerator Rental
If you rent an aerator, you get a machine that pulls small plugs of soil from your lawn so air, water and fertilizer can reach the roots. Choose a core aerator sized for your yard, time it to your grass type, and compare a few suppliers. ## What a lawn aerator does Over time, foot traffic, mowing and rain pack soil down. Compacted soil makes it hard for roots to grow and for water to soak in, and a thick thatch layer can build up on the surface. A core aerator rolls across the lawn and drives hollow tines into the ground, pulling out short plugs of soil and leaving them on the surface to break down. The holes give roots room to grow and let water, air and nutrients reach deeper. Homeowners rent one once or twice a year, often right before overseeding or fertilizing, since seed and nutrients settle into the holes. Landscapers use larger units on lawns, parks, sports fields and commercial properties. ## Types of aerators | Type | What to know | |---|---| | Core (plug) aerator, walk-behind | The standard homeowner rental; pulls soil plugs and gives the best results on compacted soil | | Spike aerator | Pokes holes without removing soil; lighter, but can compact soil around each hole | | Stand-on or ride-on aerator | Covers large lawns and commercial turf quickly | | Tow-behind aerator | Pulled by a lawn tractor; handy for big, open areas | Most people who rent a lawn aerator choose a walk-behind core model. They are heavy for their size, which helps the tines penetrate, so plan on two people to load and unload one. ## How to choose the right aerator - Measure your lawn. Small and medium yards are well suited to a walk-behind lawn core aerator rental. Large properties go faster with a stand-on or tow-behind unit. - Check your soil. Heavy clay and high-traffic areas benefit most from core aeration. - Consider terrain. Slopes and tight spaces between beds are easier with a compact walk-behind machine. - Think about timing. Cool-season grasses are usually aerated in early fall or spring. Warm-season grasses do best in late spring or early summer while they are actively growing. ## Tips before you rent - Water first. Aerate a day or two after a good rain or watering. Moist soil lets the tines go deeper; dry, hard soil means shallow holes and a rough ride. - Mark hazards. Flag sprinkler heads, shallow irrigation lines, invisible pet fence wires, valve boxes and septic lines so you can steer around them. - Mow beforehand. A shorter lawn makes the machine easier to handle and the plugs easier to see. - Make multiple passes. Cover the lawn in one direction, then go across it on compacted areas. - Turn carefully. Lift the tines or disengage them when turning, as the supplier shows you, to avoid tearing the turf. - Wear sturdy shoes and hearing protection, and keep kids and pets off the lawn while you work. - Leave the plugs. They break down in a week or two and return soil to the surface. ## How to use a lawn aerator A core aerator works best on moist soil and a short lawn, so plan the job a day or two after a good rain or watering. 1. Mow the lawn a little shorter than usual and water it the day before if the soil is dry and hard. 2. Mark sprinkler heads, shallow irrigation lines, cable runs and septic lines with flags so you can steer around them. 3. Wear sturdy closed-toe boots, eye protection and hearing protection, and keep kids and pets off the lawn while you work. 4. Unload the aerator on a flat spot with the tines raised or disengaged, then check the fuel and oil before starting. 5. Start the engine with the tines up, then lower them only once you are on the grass and ready to move. 6. Make straight passes along the longest side of the lawn, overlapping slightly, and raise the tines before every turn. 7. Go over compacted areas such as paths and play spaces a second time in a crisscross direction. 8. Raise the tines and shut off the engine before crossing driveways, sidewalks or stepping stones. 9. Knock soil off the tines and wipe down the deck before you load it back up, so it goes back in the condition you received it. ## Mistakes to avoid - Aerating bone-dry soil. The tines bounce off hard ground and pull few or no plugs, so you pay for the rental and get little benefit. - Aerating soggy soil. Wet clay smears and seals the holes, and the machine can tear up the turf. - Turning with the tines down. That rips up strips of grass and can bend tines. - Skipping the flags. Hollow tines can crack sprinkler heads and puncture shallow irrigation lines. - Underestimating the weight. Core aerators are heavy and can get away from you on slopes and when unloading from a truck bed. - Raking up all the plugs right away. The cores break down and return soil and organic matter to the lawn. ## Pro tips - Aerate cool-season lawns in early fall or spring and warm-season lawns in late spring or early summer, when grass is actively growing. - Overseed and fertilize right after aerating, while the holes are open and give seed good soil contact. - On slopes, run the aerator across the hill instead of straight up and down for better control. - Split the rental with a neighbor; the machine covers a typical yard quickly and the rest of the day is wasted otherwise. - If thatch is the bigger problem, a [dethatcher rental](/dethatcher-rental/) clears it first, and our [landscaping equipment rental](/landscaping-equipment-rental/) guide covers the rest of the lawn renovation lineup. ## How to find aerator rental near you Rates are set by each supplier and vary by machine type, rental length, location and delivery. Half-day and daily periods are common for homeowners, and some neighbors split a rental to aerate several yards in one day. Use the Browse equipment button to search by your city and rental dates. You will see live lawn aerator rental listings from rental suppliers on the Derental marketplace. Compare a few options on machine type, tine style, transport or delivery, and each supplier's terms, then request the aerator online. If you plan to overseed, line up your seed before the rental so you can spread it right after aerating.
Learn more →Mini Excavator Rental
A mini excavator rental puts a compact tracked digger on your site for trenches, footings, ponds and demolition where a full-size machine will not fit. Pick the size class by dig depth, access width and transport, then compare a few suppliers. ## What a mini excavator is used for A mini excavator, also called a compact excavator, is a scaled-down excavator with a rotating upper house, a boom and stick with a bucket, and rubber or steel tracks. Most also carry a small blade on the front for backfilling and leveling. The compact footprint lets it work in backyards, between houses, inside fenced areas and on finished sites with less ground damage than larger machines. Typical jobs include digging trenches for water, sewer, gas and electrical lines, excavating footings and foundations, digging ponds and drainage swales, installing septic components, removing stumps and roots, breaking up concrete with a hammer attachment and loading debris into a truck or dumpster. ## Mini excavator size classes Compact excavators are usually grouped by operating weight. Exact dig depth and reach vary by model, so check the specs on the listing. | Class | Typical uses | |---|---| | Micro excavator (roughly 1 ton and under) | Indoor work, through-gate backyard jobs, irrigation and small trenches | | Small excavator (roughly 1 to 3 tons) | Residential trenching, landscaping, fence and footing work | | Mid-size compact (roughly 3 to 6 tons) | Utility trenches, foundations, ponds, heavier digging | | Large compact (roughly 6 to 10 tons) | Commercial site work and bigger excavation | A micro excavator rental or small excavator rental is often the right call for homeowners because those machines can fit through standard gates and tow on lighter trailers. Bigger compact machines dig deeper and lift more, but need a heavier trailer and more room to work. ## How to choose the right compact excavator - Start with dig depth. Know how deep your trench or hole needs to be, then add a margin. - Measure access. Check gate widths, side yards and overhead clearance from wires, eaves and branches. - Consider tail swing. Zero or reduced tail swing machines keep the rear of the house within the tracks, so you can work tight against walls and fences. - Pick the bucket width. Narrow buckets for utility trenches, wider buckets for general digging and loading. Ask about a hydraulic thumb for handling rocks, roots and debris. - Think about surfaces. Rubber tracks are gentler on lawns, driveways and pavement. ## Tips before you rent a mini excavator - Call 811 before you dig. It is free and required in many places. Wait until underground utilities are marked, then hand-dig to expose lines near the marks. - Plan transport. Check the machine's weight against your trailer and tow vehicle ratings, or arrange delivery through the supplier. - Get a walkthrough. Control patterns can differ, so learn the controls in an open area before working near structures. - Keep a safe zone. Nobody should stand within the swing radius while the machine is running. - Watch your trench. Trenches deeper than about five feet generally require protective systems such as sloping, shoring or a trench box under OSHA rules. Never enter an unprotected trench. - Work on stable ground, keep the blade down while digging when possible, and travel with the bucket low. ## How to use a mini excavator Spend your first half hour learning the controls in an open spot before you dig anywhere near a house or a utility line. 1. Call 811 a few working days before digging and wait for the lines to be marked. Hand dig near any marks, and look up for overhead power lines. 2. Walk around the machine: check the tracks, look for hydraulic leaks, confirm the bucket pins and quick coupler are locked, and check fluid levels. 3. Climb in using the handholds, buckle the seat belt and only then lower the hydraulic lockout lever. 4. Check which control pattern the machine is set to. Many have a selector, and the same lever does different things in each pattern. 5. Practice swinging, booming and curling at low throttle, then drop the blade to the ground for stability before you dig. 6. Dig in smooth strokes: reach out, curl in, lift and swing to the spoil pile. Keep spoil at least 2 feet back from the trench edge, as OSHA requires on trench work. 7. Travel straight up and down slopes with the bucket low, and avoid swinging a loaded bucket toward the downhill side. 8. Do not let anyone enter a trench 5 feet deep or more unless it has a protective system such as shoring, a trench box or proper sloping. 9. To shut down, set the bucket and blade on the ground, raise the lockout lever, idle down and turn off the engine. 10. Knock the mud out of the tracks, refuel if required and return any extra buckets that came with it. ## Mistakes to avoid - Swinging a full bucket on a slope or with the tracks on uneven ground, which can tip the machine over. - Digging under the tracks or too close to the edge of an existing trench, which can collapse beneath the machine. - Forgetting the tail swing on a standard-tail machine and hitting a house, fence or helper behind you. - Traveling with the boom high and the bucket in the air instead of low and close to the ground. - Starting to dig without checking the control pattern and getting a swing when you expected a boom movement. - Counter-rotating the tracks on a lawn or driveway, which tears up turf and scuffs pavement. - Assuming your truck and trailer can haul it without checking their ratings against the machine's weight. ## Pro tips - Use the dozer blade to backfill and rough grade instead of just as a stabilizer. - Stockpile topsoil separately from the subsoil so the good dirt goes back on top when you backfill. - Rent a narrower bucket for trenches. It digs a cleaner trench and leaves less to backfill. - Plan where the spoil, dump trailer and machine will sit before you dig, so you do not box yourself in. - Keep the blade on the side you are digging toward for the most stable footing. For moving and spreading the dirt you dig out, pair it with a [skid steer rental](/skid-steer-rental/). For long, narrow utility runs, a [trencher rental](/trencher-rental/) can be faster. ## How to find a mini excavator rental near me The mini excavator rental price is set by each supplier and varies by size class, attachments, rental length, location and delivery. Daily, weekly and monthly rates are common, and the price to rent a mini excavator for a week is often better value than several separate days if your job may run long. To rent a mini excavator, use the Browse equipment button to search by your city and rental dates. You will see live compact excavator rental listings from rental suppliers on the Derental marketplace. Compare a few options on size, buckets and attachments, delivery and terms, then request the machine online.
Learn more →Forklift, Telehandler & Material Handling Rental
A forklift rental lets you lift and move pallets and heavy materials in a warehouse, yard or jobsite. Match the forklift to your ground, load weight and lift height, confirm operators are trained, and compare suppliers. Telehandlers, pallet jacks and material lifts cover the jobs a standard forklift cannot. ## What it is used for Forklifts unload trucks, move pallets around warehouses, stack inventory on racks and stage materials on construction sites. The same category includes equipment for lifting and moving loads of all sizes: reach trucks for narrow warehouse aisles, telehandlers for placing materials on upper floors and roofs, electric and manual pallet jacks for moving pallets short distances, and material lifts, drywall lifts, hoists, conveyors, winches, dollies and machine skates for loads that need a gentler or more specialized approach. ## Types | Type | Best for | |---|---| | Warehouse forklift | Smooth, flat indoor floors, loading docks and racking | | Reach truck | Narrow aisles and high racking in warehouses | | Rough terrain forklift | Gravel, dirt and uneven construction sites | | Telehandler | Placing loads up and out onto upper floors, roofs and over obstacles | | Electric pallet jack | Moving pallets across a warehouse or store floor with little effort | | Manual pallet jack | Short moves of pallets on flat floors | | Material or drywall lift | Raising panels, ductwork and materials into position overhead | ## How to choose the right forklift - Match the ground. Warehouse forklifts need smooth, flat floors; rough terrain forklifts and telehandlers handle gravel, mud and grade. - Check capacity at height. Confirm the rated capacity at the lift height and load center you need, not just the maximum on the brochure. - Measure your space. Aisle width, door openings and overhead clearance decide which machine fits. - Pick the fuel. Electric units suit indoor work with no exhaust; propane and diesel suit outdoor and mixed use. - Size the forks. Long or oversized loads may need fork extensions or a different attachment. ## How to use a forklift OSHA requires forklift operators to be trained and evaluated before they operate a forklift (29 CFR 1910.178). These steps assume a trained, authorized operator. 1. Do a pre-shift inspection: tires, forks, chains, mast, hydraulic leaks, horn, lights, brakes, seat belt and fuel or battery charge. 2. Fasten the seat belt, check that the area is clear and sound the horn before moving. 3. Approach the load squarely, set the forks level and wide enough to support it, and drive in until the load sits against the backrest. 4. Lift the load just high enough to clear the floor, then tilt the mast back slightly to cradle it. 5. Travel with the load low, at a slow speed, and look in the direction of travel; drive in reverse if the load blocks your view. 6. On ramps and grades, keep the load on the uphill side, going up forward and down in reverse. 7. At the drop point, stop, level the forks, raise the load only when the truck is stationary, and set it down gently. 8. Back out slowly, lower the forks to the floor, and never let anyone stand or walk under raised forks. 9. When finished, park on level ground, lower the forks flat, set the brake, shut off the machine and charge or refuel it as the rental terms require. ## Mistakes to avoid - Lifting beyond the rated capacity at height. A load that is fine at the floor can tip the forklift forward when raised. - Turning with the load raised. The center of gravity shifts and side tip-overs happen fast. - Driving on rough ground with a warehouse forklift. Small solid tires catch on gravel and potholes and can tip the truck. - Giving someone a ride. Forklifts are built for one operator; standing on the forks or the frame causes serious injuries. - Skipping the seat belt. In a tip-over, the belt keeps the operator inside the protective frame. - Ignoring floor limits. Trailers, mezzanines and dock plates have weight ratings that a loaded forklift can exceed. ## Pro tips - Check the data plate on the actual machine you receive; capacity and load center vary between models. - Ask the supplier which attachments are available, such as fork extensions or a jib, before you book. - Charge electric forklifts at the end of each shift, not halfway, and keep the charger area ventilated. - Plan a clear, marked path for forklift traffic and keep foot traffic separate. - Make sure every operator has completed training and an evaluation before the rental arrives; OSHA requires it for anyone running a powered industrial truck. If your operators still need training, you can [get forklift certified online](https://trustedforkliftcertification.com/) through a provider that offers operator certification courses. For lighter moves, a [pallet jack rental](/pallet-jack-rental/) is simpler, and a [telehandler rental](/telehandler-rental/) handles rough ground and upper-floor placement. ## Tips before you rent - Confirm the weight and dimensions of your heaviest load and the height you need to reach. - Ask how the forklift will be delivered and whether your site can accept a delivery truck. - For electric units, confirm the battery is fully charged at delivery and whether a charger is included. - For propane units, ask whether a spare tank is included. - Clarify return condition, including fuel level and cleaning. ## How to find a forklift rental near you Search by your city and rental dates on the Derental marketplace to see warehouse forklifts, rough terrain forklifts, telehandlers, pallet jacks and lifts from suppliers. Compare suppliers by location, delivery and rates, then request the rental in one place. Rates are set by each supplier and vary by machine type, rental length and location.
Learn more →Construction Heater, Cooling & Dehumidifier Rental
A construction heater rental keeps a jobsite warm enough to work, cure and dry materials. This category also covers cooling and air quality gear. Match the unit to your space, ventilation and fuel, then compare suppliers for your dates. ## What this equipment is used for Temporary heat helps concrete cure, paint and drywall mud dry, and crews stay productive. Cooling units support server rooms, events and hot warehouses. Air movers, dehumidifiers and scrubbers help after water damage. For those, see [dehumidifier](/dehumidifier-rental/) and [portable air conditioner](/portable-air-conditioner-rental/) guides. ## Types of heaters | Type | Best for | |---|---| | Direct-fired heater | Well-ventilated spaces where exhaust is acceptable | | Indirect-fired heater | Enclosed spaces that need clean, exhaust-free air | | Electric heater | Small enclosed areas with enough power | | Radiant heater | Spot heat for people or a work area | | Hydronic or ground heater | Thawing ground and curing concrete in cold weather | ## How to choose the right heater - Work out the volume. Heat load depends on the space's size, insulation and how cold it gets. - Check ventilation. Fuel-fired units need air and create exhaust. - Pick fuel. Compare propane, diesel, natural gas and electric based on what your site has. - Protect materials. Direct-fired heat adds moisture that can affect drywall and paint. - Plan power. Most fuel-fired units still need electricity for the fan. ## How to use a construction heater 1. Read the manual and clear combustibles from around the unit. 2. Set it on a level, non-combustible surface. 3. Connect fuel and power, and check hoses and fittings for leaks. 4. Provide fresh air, and use carbon monoxide monitors in enclosed areas. 5. Check on it during use, and never leave it running where the manual prohibits it. 6. Shut it down and let it cool before moving it. ## Mistakes to avoid - Using direct-fired heat in a closed room. Carbon monoxide and moisture can build up. - Placing heaters too close to tarps or lumber. Follow required clearances. - Undersizing the unit. An undersized heater can run constantly without reaching temperature. - Letting fuel run out. A cold pour or wet finish can set back the job. - Skipping a fuel plan. Ask who refills tanks during longer rentals. ## Tips before you rent - Give the supplier your room size, target temperature and fuel availability. - Ask whether ducting, hoses, thermostats and tanks are included. - Confirm who handles fuel delivery. ## How to find a construction heater rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by unit size, rental length and location.
Learn more →Chainsaw & Pole Saw Rental
A chainsaw rental lets you cut fallen trees, firewood and storm debris without buying a saw you will rarely use. Pole saws handle high limbs from the ground, and concrete chainsaws cut deep, square openings in masonry, so pick the saw that matches the material and height of your cut. ## What you can do with a rented saw When you rent a chainsaw, you are usually tackling a short burst of heavy cutting: cleaning up after a storm, clearing a lot, bucking a downed tree into rounds or trimming overgrowth along a fence line. Renting gives you a professionally maintained saw with a sharp chain for the job, then you return it. Typical jobs include: - Cutting fallen trees and large branches into manageable pieces - Processing firewood - Clearing brush and small trees from a property - Trimming limbs over driveways, roofs and fences with a pole saw - Cutting door, window and utility openings in concrete or block with a concrete chainsaw ## Types of saws you can rent | Saw | What it is | Best for | |---|---|---| | Gas chainsaw | Engine-powered saw with a guide bar and chain | Storm cleanup, felling, firewood | | Battery or electric chainsaw | Quieter saw with less maintenance | Light trimming and small limbs | | Pole saw | Small saw head on an extendable shaft | Limbs overhead, reachable from the ground | | Concrete chainsaw | Diamond-segment chain, water-fed to control dust and cool the cut | Deep, square-cornered cuts in concrete, block and stone | Bar length is the main size choice for a standard chainsaw. A shorter bar is lighter and easier to control for limbing and small trees. A longer bar handles thicker trunks but adds weight and demands more experience. Tell the supplier the diameter of the largest wood you plan to cut. ## How to choose the right saw For general cleanup, a mid-size gas saw is the usual pick. If most of your work is above head height, a pole saw rental is safer than climbing a ladder with a chainsaw, which you should never do. For concrete, a concrete chainsaw or cement chainsaw makes plunge cuts and clean inside corners that a round-blade saw cannot finish without overcutting. It needs a water supply, and the operator should be comfortable with heavy, high-torque tools. ## Safety tips before you rent - Wear the right gear: chainsaw chaps or protective pants, a helmet, eye and face protection, hearing protection, gloves and sturdy boots. - Understand kickback. Contact with the upper tip of the bar can throw the saw back toward you. Keep a firm two-handed grip and stand to the side of the cut line. - Plan your escape path before felling any tree, and keep people and pets well away. - Stay far away from power lines. Trees touching or near lines are a job for the utility or a qualified line-clearance crew. - Check chain tension, chain oil and fuel mix as the supplier instructs before starting. - For concrete cutting, keep the water running. Dry cutting concrete releases respirable crystalline silica, which OSHA regulates, so use water control and appropriate respiratory protection. - Large or leaning trees near structures are dangerous. Hire a professional arborist when in doubt. ## How to find chainsaw rental near me To find a chainsaw for rent near you, search by city and the dates you need it. Jobsite Jockey shows live inventory from rental suppliers on the Derental marketplace, including standard chainsaws, pole saws and concrete saws. compare a few suppliers before you book. Rates are set by each supplier and vary by saw type, rental length, location and delivery. Ask what is included, such as a spare chain, fuel can or water tank, and how fuel is handled on return. Then request the rental online and confirm the details directly with the supplier. Use the Browse equipment button to see chainsaws and pole saws available in your area.
Learn more →Tractor Rental
Search tractor rental near me to find compact and utility tractors for mowing, tilling, grading and loader work on farms, acreage and job sites. Choosing the right horsepower and attachments matters more than the tractor's size alone. ## What a Rented Tractor Can Do A tractor is a power source more than a single tool. Its power take-off (PTO), three-point hitch, hydraulics and front loader let it run a wide range of implements. Landowners and contractors rent tractors to mow pastures and fields, clear brush, till gardens and food plots, spread gravel and grade driveways, move soil, mulch and hay with a front loader, dig post holes with an auger, and pull trailers or wagons around a property. For a one-time project or seasonal work, tractor rentals avoid the cost of owning, storing and maintaining a machine and implements. ## Types of Tractors and Common Attachments | Tractor class | Typical use | Notes | |---|---|---| | Sub-compact | Large lawns, light landscaping, small gardens | Easy to transport and maneuver; limited lift and power | | Compact | Acreage, driveways, loader work, brush mowing | The most common rental class; wide range of implements | | Utility | Farms, large fields, heavier implements | More power and weight for bigger cutters and tillers | Popular attachments include a front loader bucket, pallet forks, box blade or grading scraper, rotary tiller, rotary cutter (brush hog), landscape rake, post hole auger and backhoe. A tractor and bush hog rental is one of the most common pairings for clearing overgrown pasture and fence lines. ## How to Choose the Right Tractor - Start with the implement. Each implement has a recommended PTO horsepower and three-point hitch category. Choose the tractor that matches what you need to run, not the other way around. - Think about the loader. If you plan to move heavy material, check the loader's rated lift capacity and remember that ballast or a rear implement helps keep the tractor stable. - Consider the ground. Agricultural tires grip in dirt and mud; turf or industrial tires are gentler on lawns. Four-wheel drive helps on slopes and soft soil. - Check access and transport. Measure gates and bridges, and figure out how the tractor will get to the property. Many renters choose delivery. ## Tips Before You Rent - Call 811 before tilling deep, augering or grading where buried lines could be. - Use the rollover protective structure (ROPS) in the raised position and wear the seat belt. Rollovers are a leading cause of tractor fatalities. - Carry loads low, especially on slopes, and avoid sudden turns with a raised loader. - Never step over or near a turning PTO shaft. Keep shields in place and shut down the engine before getting off to adjust an implement. - Keep bystanders, especially children, well away from the tractor and implements. - Do a walkaround and check fluids, tires and hitch pins before starting. ## How to Find Tractors for Rent Near You Use the Browse equipment button to search tractors for rent near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, alongside the broader range of contractor equipment rental near me, so you can line up a tractor and the implements you need from one search. Compare horsepower, attachments, tire type, delivery and each supplier's terms. Rates are set by each supplier and vary by tractor class, attachments, rental length, location and delivery. A day or weekend can cover a single project, while weekly or monthly terms suit seasonal work. When you have found the right setup, request it online and confirm the details with the supplier.
Learn more →Log Splitter Rental
A log splitter rental uses hydraulic force to split rounds of firewood in seconds, saving hours of axe and maul work. Most homeowners rent a gas-powered towable splitter, while smaller electric units suit light, occasional splitting. ## What a Log Splitter Is Used For A log splitter drives a wedge through a log, or pushes the log into a fixed wedge, using a hydraulic cylinder. It is the practical way to process a downed tree, a delivery of firewood rounds, or seasonal wood for a stove or fireplace. Splitting by hand works for a small pile, but a hydraulic wood splitter rental makes short work of big, knotty or green rounds that would otherwise take a full weekend with a maul. ## Types and Sizes Splitters are rated by force, usually in tons. Higher tonnage handles larger diameters and tougher, knotty or dense hardwoods. | Type | Typical use | Notes | |---|---|---| | Electric splitter | Small rounds, light splitting, near the house | Quieter, no fumes, plugs into an outlet; lower force | | Gas towable, horizontal | Most firewood jobs | Towed behind a vehicle; you lift logs onto the beam | | Gas towable, vertical/horizontal | Large, heavy rounds | Beam tilts vertical so heavy rounds can be rolled into place rather than lifted | | Tractor or skid steer attachment | High volume on farms and job sites | Runs off the carrier machine's hydraulics | ## How to Choose the Right Splitter - Look at your wood. Small-diameter, straight-grained softwood splits easily with a lower-force unit. Large, knotty or green hardwood rounds call for higher tonnage. - Think about lifting. If you have big rounds, a model that converts to vertical splitting saves your back because you do not have to hoist the log onto the beam. - Consider location. An electric log splitter rental is handy for a small pile next to the garage. A gas towable firewood splitter is better out in the yard or woodlot. - Check cycle time. Faster cycle times mean more wood split per hour, which matters if you have a big pile and a short rental window. - Cut rounds to length first. Most splitters have a maximum log length, so buck your logs to fit before the splitter arrives. ## Tips Before You Rent - Towing: confirm your vehicle has the correct hitch ball size, working lights if required, and safety chains. Many towable splitters are not built for highway speeds, so ask the supplier about recommended towing speed. - Set up on firm, level ground, chock the wheels, and keep the work area clear of tripping hazards and bystanders, especially kids and pets. - Only one person should operate the controls and position logs. Two-person operation is a common cause of hand injuries. - Keep hands off the log ends and away from the wedge while the ram is moving. Never try to adjust a log during the stroke. - Wear safety glasses, gloves, steel-toe or sturdy boots and hearing protection on gas models. Avoid loose sleeves and jewelry. - Never check a hydraulic leak with your hand. Pressurized fluid can penetrate skin. - Check engine oil and hydraulic fluid before starting, and ask the supplier what fuel and checks they expect. ## How to use a log splitter A log splitter is a one-operator machine. Only the person running the control should load and position logs. 1. Set the splitter on firm, level ground, chock the wheels and lower the stand so it cannot shift during a split. 2. Wear safety glasses, hearing protection, steel-toe or sturdy boots, snug gloves and close-fitting clothing; add chaps if you are also cutting rounds with a chainsaw. 3. Check the hydraulic fluid and engine oil, look for leaking hoses, and confirm the control lever returns to neutral on its own. 4. Clear a work zone and keep helpers, kids and pets well back; a helper can stack split wood, but never touches the log on the beam. 5. Start the engine and let it warm up before splitting. 6. Set each round flat on the beam with the cut ends square to the wedge and the ram, and keep your hands on the sides of the log, never the ends. 7. Operate the control with one hand and keep the other clear, letting the ram push the log through the wedge at its own pace. 8. If a log twists or will not split, retract the ram, rotate the log and try again at a different spot rather than forcing it. 9. When finished, retract the ram, shut off the engine, clean bark and chips off the beam and return it with the fuel and fluids as agreed. ## Mistakes to avoid - Letting a second person steady the log. Two people at the beam is how fingers get crushed; one operator runs the machine. - Splitting rounds cut at an angle. The log slips sideways off the wedge under pressure instead of splitting. - Putting a hand between the log and the ram to adjust it. Always retract first. - Overloading the splitter with knotty, crotched pieces. The ram stalls, the hydraulics strain and the log can pop out of position. - Wearing loose gloves or sleeves near the beam. Fabric can get pinched as the log splits. - Splitting on a slope. The machine can shift or tip as the ram cycles. ## Pro tips - Cut rounds to the length your stove or fireplace needs before you rent, so the splitter time is all splitting. - Split from the outside edges inward on big rounds, taking slabs off the sides before the center. - Freshly cut or fully frozen wood often splits more easily than half-dried rounds. - Stage rounds on one side and the stack on the other so you are not stepping over wood while running the machine. - A [chainsaw rental](/chainsaw-rental/) handles bucking the logs into rounds, and a [wood chipper rental](/wood-chipper-rental/) clears the brush and small limbs left over. ## How to Find a Log Splitter Rental Near You Use the Browse equipment button to search for a log splitter rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including towable gas units, electric splitters and attachments for skid steers and tractors. Compare tonnage, vertical capability, hitch requirements and whether delivery is offered. Rates are set by each supplier and vary by splitter size, rental length, location and delivery. A single day is often enough for a typical backyard pile, while a weekend or longer term can make sense after storm cleanup or when you are putting up a full season of firewood. Once you have found a wood splitter for rent near you that fits the job, request it online and confirm pickup details directly with the supplier.
Learn more →Golf Cart Rental
Golf cart rentals near me searches cover more than the golf course: carts move people and gear around job sites, events, campuses and large properties. Choose seating and power type for your use, confirm where carts are allowed to drive, and compare a few suppliers. ## What golf carts are rented for Golf carts are small, quiet, low-speed vehicles that make it easy to cover ground that is too far to walk comfortably but not worth driving a truck across. Common reasons people look for golf cart rental include: - Getting crews, inspectors and supervisors around large construction sites, solar farms and industrial yards - Moving staff, guests and supplies at weddings, festivals, fairs, tournaments and sporting events - Shuttling people with limited mobility between parking areas and venues - Getting around campgrounds, resorts, marinas and private communities - Facility and grounds maintenance on campuses and large estates Utility versions with a cargo bed are popular for work use, since they can carry tools, coolers, signage and event supplies along with passengers. ## Types of golf carts | Type | What to know | |---|---| | Two-seat cart | Simple transport for one or two people, often the most compact option | | Four-seat cart | Rear-facing back seat or forward-facing bench; good for small groups | | Six-seat and larger carts | Shuttle-style seating for events and venues | | Utility cart | Cargo bed or flip seat that converts to a small cargo deck | | Electric | Quiet, no fumes, good indoors or near guests; needs charging | | Gas | Longer run time between refueling; useful for long days on large sites | Some carts are set up as street-legal low-speed vehicles with lights, mirrors and seat belts. Whether a cart can be driven on public roads depends on its equipment and on state and local rules, so ask the supplier and check local regulations before you plan any road use. ## How to choose the right golf cart - Count riders and cargo. Pick seating for the largest group you will move at once, and add a utility bed if you are hauling gear. - Think about terrain. Gravel, grass and hills may call for a cart with more power or better tires. - Plan for charging or fuel. Electric carts need a place to plug in overnight. For multi-day events, confirm charging access on site. - Decide on quantity. Large events often need several carts. Ask about multi-cart rental of golf carts and whether chargers are included. ## Tips before you rent - Set ground rules. Only licensed adult drivers, no riders standing or hanging off the sides, and one passenger per seat. - Keep speeds low, especially around crowds, on slopes and on wet grass. - Plan delivery and storage. Carts need a secure, level spot when not in use, and keys should be controlled. - Check insurance and damage terms. Ask how the supplier handles damage and what coverage you need, especially for events. - Walk the route. Note curbs, narrow paths and areas where carts should not go. ## How to find golf carts near me for rent Golf cart rental companies range from dedicated cart dealers to general equipment rental suppliers. Rates are set by each supplier and vary by cart type, seating, number of carts, rental length, location and delivery. Use the Browse equipment button to search by your city and rental dates. You will see live listings from rental suppliers on the Derental marketplace, so you can compare a few options on cart size, electric or gas, delivery and pickup, and each supplier's terms, then request your carts online. For events, book early so you have time to sort out delivery windows and charging before the big day.
Learn more →Power Tool & Hand Tool Rental
Power tool rental gives you the right tool for a single job without paying to own it, from demo hammers and saws to welders, sprayers and laser levels. Check what consumables are included and compare suppliers for your dates. ## What rented tools are used for Renting makes sense for tools you need briefly or that cost too much to buy for one project. Common choices are table and tile saws, grinders, magnetic drills, welders, plasma cutters, paint sprayers, drywall sanders, vacuums, laser levels and surveying tools. For specialized guides, see [pressure washer](/pressure-washer-rental/), [paint sprayer](/paint-sprayer-rental/) and [jackhammer](/jackhammer-rental/). ## Common tool types | Tool | Used for | |---|---| | Rotary hammer or demo hammer | Drilling and light breaking in concrete | | Tile, table or chop saw | Clean, repeated cuts | | Angle grinder | Cutting and surface prep | | Welder or plasma cutter | Metal repair and fabrication | | Airless paint sprayer | Large painted surfaces | | Drywall sander | Finishing with less dust | | Laser level | Layout, grading and alignment | ## How to choose the right tool - Size it to the material. Drill and blade capacity should match the material and depth. - Check power. Some tools need a 240-volt outlet or a generator. - Ask about consumables. Blades, bits, tips and filters may be sold or billed by wear. - Add dust control. Vacuums and shrouds make cleanup and safety easier. - Compare rental length. A week may cost less than several separate days. ## How to use a rented tool 1. Ask for a quick walkthrough, and read the manual or decals. 2. Check cords, guards and any fluids before you start. 3. Clamp or support the work, and wear the right eye, hearing and breathing protection. 4. Let the tool do the cutting without forcing it. 5. Unplug it to change blades or bits. 6. Clean it before you return it. ## Mistakes to avoid - Removing a guard. It's there to protect you, and removal often voids the rental terms. - Using the wrong blade. Wrong blades cut poorly and can kick. - Overloading a cord. Long, thin extension cords can overheat tools. - Skipping fire watch when welding or grinding. Sparks travel far. - Returning it dirty. Cleaning fees add up. ## Tips before you rent - Ask what is included in the rental price. - Photograph the tool when you pick it up. - Ask if the supplier has a backup if the tool fails. ## How to find tools to rent near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by tool, rental length and location.
Learn more →Road Roller & Compaction Roller Rental
A roller rental compacts soil, gravel and asphalt over large areas, from building pads to parking lots. Choose a smooth drum, padfoot or pneumatic roller based on the material and area, and compare suppliers for your dates. ## What a roller is used for Rollers compact subgrade and base rock, build up fill in layers and finish asphalt. For small areas and trenches, a [plate compactor rental](/plate-compactor-rental/) is usually enough. For paving, pair a roller with an [asphalt paver rental](/asphalt-paver-rental/). ## Types of rollers | Type | Best for | |---|---| | Walk-behind double drum | Patches, paths and tight areas | | Ride-on double drum | Asphalt driveways and parking lots | | Single drum smooth | Granular soil and base rock | | Padfoot or sheepsfoot | Clay and cohesive soils | | Pneumatic tire roller | Asphalt and kneading compaction | ## How to choose the right roller - Match the material. Smooth drums suit granular base and asphalt, while padfoot drums suit clay. - Size it to the area. Bigger drums finish large pads faster. - Check lift thickness. Each roller compacts only so deep. - Consider vibration. Use it on most base, but be careful near buildings and utilities. - Plan transport. Ride-on rollers need a trailer and a place to unload. ## How to use a roller safely 1. Walk the site for slopes, edges, trenches and buried lines. 2. Do a daily check of fluids, drums, water system and brakes. 3. Wear the seat belt where the machine has a rollover structure. 4. Roll in overlapping passes and keep away from unsupported edges. 5. Turn off vibration before stopping or changing direction. 6. Park on level ground with the brake set. ## Mistakes to avoid - Rolling at the wrong moisture. Soil that's too dry or wet won't compact. - Working too close to an edge. Rollers can tip into trenches. - Using vibration near fragile structures. It can cause damage. - Letting the drum dry on asphalt. Material sticks and mars the mat. - Skipping testing. Ask your engineer what density is required. ## Tips before you rent - Know your material, lift thickness and area. - Ask about water tanks and spray systems for asphalt. - Book trucks and trailers to move it. ## How to find a roller rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by roller size, rental length and location.
Learn more →Lawn Roller Rental
A lawn roller rental presses new sod and seed into contact with the soil and smooths minor bumps in a yard. Choose a push or pull-behind roller, fill it with water if it's designed for that, and compare suppliers for your dates. ## What a lawn roller is used for Rollers firm new sod, press seed into prepared soil and smooth small surface ridges. They don't fix major dips, which need soil added. If your lawn is hard already, consider an [aerator rental](/aerator-rental/) before rolling it. To remove old turf first, see the [sod cutter rental](/sod-cutter-rental/) guide. ## Types of lawn rollers | Type | Best for | |---|---| | Push roller | Small yards and tight spaces | | Pull-behind roller | Larger lawns, towed by a riding mower or tractor | | Water-filled drum | Adjusting weight by how much you fill it | | Sand-filled drum | Extra weight for specific jobs | ## How to choose the right roller - Measure your lawn. Push rollers suit small areas, and tow-behind models suit larger ones. - Check drum width. Wider drums cover ground faster. - Adjust the weight. Use only as much as the job needs. - Check your tow vehicle. Confirm the hitch fits. - Plan your transport. Empty the drum before loading. ## How to use a lawn roller 1. Water lightly so the soil is damp but not soggy. 2. Fill the drum partly and test the pressure on a small area. 3. Roll in straight, slightly overlapping lines. 4. Turn gently at the edges to avoid tearing sod. 5. Water new sod or seed after rolling. 6. Drain the drum before return. ## Mistakes to avoid - Rolling wet ground. It compacts soil and hurts roots. - Rolling too often. Compaction makes it harder for grass to grow. - Expecting it to level big dips. Fill those with soil. - Using it on steep slopes. A heavy roller can get away from you. - Forgetting to drain it. A full drum is very heavy to lift. ## Tips before you rent - Ask about the hitch type and drum capacity. - Combine rolling with seeding or new sod for the best result. - Check that the drum's fill plug seals properly. ## How to find a lawn roller rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by type, rental length and location.
Learn more →Floor Sander & Floor Care Rental
A floor sander rental brings worn hardwood back to bare wood so you can refinish it. Choose a drum or orbital sander based on your floor and experience, stock up on grits and compare suppliers for your dates. ## What a floor sander is used for Floor sanders strip old finish and flatten hardwood. This category also includes edgers, buffers and floor polishers, and tile strippers for pulling old flooring. Have a large bare concrete floor? Take a look at the [concrete grinder rental](/concrete-grinder-rental/) guide. ## Types of floor machines | Type | Best for | |---|---| | Drum sander | Removing thick finish and flattening floors fast | | Orbital or square buff sander | Beginners, thin floors and final passes | | Edger | Getting along walls where a big sander can't reach | | Floor buffer | Cleaning and polishing hard floors | | Tile stripper | Pulling up old tile and vinyl | ## How to choose the right machine - Check your floor's condition. A deep finish or cupped boards call for a drum sander. - Be honest about experience. Drum sanders can gouge a floor quickly, so orbital is more forgiving. - Check the floor's thickness. Engineered floors may have too little wear layer for heavy sanding. - Add an edger. You'll need one for most rooms. - Check power. Some big machines need a dedicated circuit. ## How to sand a floor 1. Clear the room, sink all nail heads and seal doors against dust. 2. Start with the coarsest grit that removes the finish, working with the grain. 3. Keep the machine moving, and lift or lower it gently so it doesn't gouge. 4. Edge along the walls with the same grit. 5. Work through medium and fine grits, vacuuming between each. 6. Clean thoroughly, then apply your stain and finish. ## Mistakes to avoid - Stopping with the drum down. It leaves a dip in seconds. - Skipping grits. Going too fine too soon leaves scratches that show under finish. - Leaving sanding dust in a pile. Fine dust and finish-soaked rags can be fire hazards, so follow the disposal directions. - Sanding across the grain. Scratches will stand out. - Sanding old finish without testing. Older floors may have lead-based coatings. ## Tips before you rent - Buy more sandpaper than you think, and ask if unused sheets can be returned. - Ask about a dust bag, and wear a proper respirator. - Ask the supplier to show you how to change the paper. ## How to find a floor sander rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Dump Trailer, Truck & Utility Vehicle Rental
A dump trailer rental lets you haul and unload debris, mulch, gravel and junk behind your own truck, with no loading dock needed. Check your tow vehicle's rating, hitch and brake controller first, then compare suppliers. For bigger sites, dump trucks, tracked dumpers, water trucks and UTVs handle the material your pickup cannot. ## What it is used for A dump trailer has a hydraulic bed that tips up so the load slides out the back, which makes it the go-to choice for cleanouts, roofing tear-offs, landscaping, yard waste and small demolition. You load it on site, tow it to the dump or the next job, and unload in minutes instead of shoveling by hand. The same category covers vehicles for larger or rougher jobs. Equipment trailers move compact machines like skid steers and mini excavators. Dump trucks and articulated haulers carry heavy loads across a jobsite. Tracked dumpers carry material through mud, sand and tight gates where a wheeled machine would get stuck. Water trucks keep dust down on dirt roads and grading jobs, and UTVs and golf carts move people and tools around large properties and events. ## Types | Type | Best for | |---|---| | Dump trailer | Cleanouts, roofing debris, mulch, gravel and yard waste towed behind a pickup | | Equipment trailer | Hauling a skid steer, mini excavator or other compact machine | | Utility trailer | Light loads such as furniture, brush and small equipment | | Dump truck | Larger volumes of soil, rock and debris on and off site | | Articulated dump truck | Moving material across rough, muddy or steep construction sites | | Tracked dumper | Carrying material through soft ground, narrow access and backyards | | Water truck | Dust control, compaction water and site cleanup | | UTV or golf cart | Moving people, tools and supplies around farms, sites and events | ## How to choose the right trailer or vehicle - Check your tow vehicle's towing capacity in the owner's manual, and compare it to the trailer's weight plus the load, not just the empty trailer. - Match the hitch. Confirm the ball size or coupler type, the receiver size and the wiring connector the trailer uses. - Confirm braking. Larger dump trailers have electric brakes, and your truck needs a working brake controller to run them. - Mind the payload. A dump trailer can be rated to carry more than your truck can safely pull; the lower limit wins. - Think about access. A tracked dumper fits through gates and over lawns where a trailer cannot back in. - For heavy trucks, ask what license the vehicle requires before you book, since larger dump trucks may need a commercial license. ## How to use a dump trailer 1. Hitch the trailer on level ground, lock the coupler, cross the safety chains under the tongue, connect the breakaway cable and plug in the wiring. 2. Test the brake lights, turn signals and trailer brakes before leaving, and set the brake controller gain for the load. 3. Load heavy material first and spread it evenly, keeping slightly more weight toward the front of the bed so the trailer does not sway. 4. Stay under the trailer's rated payload and your truck's towing limit; dense loads like soil, concrete and roofing shingles get heavy long before the bed looks full. 5. Tarp loose loads so debris cannot blow out on the road. 6. Drive slower than usual, leave extra stopping distance and take turns wide. 7. To unload, park on level, firm ground with the truck and trailer in a straight line, open the tailgate and check that no one is behind or beside the bed. 8. Raise the bed with the remote, pull forward slowly if material sticks, then lower the bed fully before driving away. 9. Sweep or rinse out the bed and return it in the condition the supplier expects. ## Mistakes to avoid - Overloading with dense material. A bed full of wet soil or broken concrete can exceed the payload and overwhelm your truck's brakes. - Dumping on a slope. A raised, loaded bed on uneven ground can tip the trailer onto its side. - Driving with the bed raised. Even a few feet of movement can hit power lines, tree limbs or garage headers. - Loading everything at the back. Too little tongue weight causes dangerous sway at highway speed. - Skipping the brake controller. Without trailer brakes working, stopping distances grow sharply under load. - Forgetting the tailgate. Raising the bed with the gate latched strains the hinges and spills the load in a heap. ## Pro tips - Lay plywood or a tarp in the bed before loading shingles or sticky debris so the load slides out cleanly. - Ask the landfill or transfer station what it accepts and how it charges before you load; mixed loads may be turned away. - Back the trailer in once and load it in place rather than moving it multiple times on a soft lawn. - Use a spotter when backing; it is easy to misjudge the trailer in tight driveways. If you do not want to tow at all, a [dumpster rental](/dumpster-rental/) sits on site until it is full, and a [skid steer rental](/skid-steer-rental/) speeds up loading heavy material into the bed. ## Tips before you rent - Ask whether the trailer comes with a charged battery for the hydraulic pump and how to recharge it. - Confirm the ball size and wiring adapter ahead of time so you are not stuck at pickup. - Check the tires, lights and safety chains before you leave the supplier's lot. - Ask about load restrictions; some suppliers do not allow certain materials such as concrete or hazardous waste. - Clarify return condition, including whether the bed must be swept or washed. ## How to find a dump trailer rental near you Search by your city and rental dates on the Derental marketplace to see dump trailers, equipment trailers, dump trucks, tracked dumpers, water trucks and utility vehicles from suppliers. Compare suppliers by location, delivery options, hitch requirements and rates, then request the rental in one place. Rates are set by each supplier and vary by size, rental length and location.
Learn more →Concrete, Paving & Masonry Equipment Rental
Concrete equipment rental covers the machines to mix, place, finish, cut and remove concrete and masonry. Match the tool to your job's volume and slab thickness, plan for dust and wash water and compare suppliers for your dates. ## What this equipment is used for Contractors and DIYers rent this equipment to pour small slabs, set posts, finish floors, cut control joints, core holes for pipe, grind floors and break out old concrete. Paving crews also rent pavers and millers. If you already know your machine, see the [concrete mixer](/concrete-mixer-rental/), [concrete saw](/concrete-saw-rental/), [concrete grinder](/concrete-grinder-rental/) or [jackhammer](/jackhammer-rental/) guide. ## Equipment types | Equipment | Used for | |---|---| | Concrete mixer | Small batches for slabs, footings and posts | | Concrete buggy | Moving wet concrete across a site | | Screed and vibrator | Leveling and consolidating a pour | | Power trowel | Finishing large flat slabs | | Concrete or masonry saw | Control joints, cutouts and block | | Core drill | Clean round holes for pipe and conduit | | Floor grinder | Leveling and polishing, or removing coatings | | Jackhammer or demo saw | Breaking and removing concrete | ## How to choose the right equipment - Work out the volume. Small pours can use a mixer, while large ones usually call for ready-mix and a buggy. - Know slab thickness. It sets your saw blade and core bit depth. - Plan for finish. A power trowel needs the slab at the right stage, so have a backup plan for heat and timing. - Choose wet or dry cutting. Wet cutting controls dust, but you need to manage slurry. - Ask what's included. Blades, bits and pads are often extra or billed by wear. ## How to plan a concrete job 1. Check for buried utilities and embedded lines before you cut or core. 2. Prepare forms, base and reinforcement. 3. Line up materials, helpers and equipment for pour day. 4. Place, consolidate and screed, then allow time before finishing. 5. Cut control joints at the right time, and keep the slab curing. 6. Clean machines right away, and keep wash water contained. ## Mistakes to avoid - Waiting too long to clean. Hardened concrete can ruin equipment and add fees. - Pouring without enough help. Concrete won't wait. - Cutting without locating rebar and conduit. Scan or check plans first. - Skipping dust control. Silica dust is a serious health hazard. - Adding too much water. It weakens the mix. ## Tips before you rent - Ask how blade or bit wear is billed. - Confirm power needs for electric machines. - Pick up the equipment the day before a big pour. ## How to find concrete equipment near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Drain Snake, Plumbing & Electrical Tool Rental
Plumbing tool rental covers drain machines, inspection cameras, pipe threaders and cutters, plus electrical tools such as wire pullers and benders. Match the tool to your pipe size and job, then compare suppliers for your dates. ## What these tools are used for Plumbers, electricians and DIYers rent these tools for clearing clogged lines, seeing inside pipes, cutting and threading pipe, freezing lines and pulling wire through conduit. For clogs, begin with the [drain snake rental](/drain-snake-rental/) guide. For flooded basements, see the [water pump rental](/pump-rental/) guide. ## Common tools | Tool | Used for | |---|---| | Drum drain machine | Sink, tub and small branch lines | | Sectional drain machine | Larger lines and longer runs | | Hydro jetter | Grease and scale inside lines | | Inspection camera | Finding the cause and location of a problem | | Pipe threader and cutter | Threaded steel pipe work | | Pipe freezer | Isolating a line without draining it | | Wire puller or conduit bender | Electrical rough-in | ## How to choose the right tool - Check pipe size. Cables and cutters are sized to line diameter, so check before you rent. - Know the pipe material. Old clay, cast iron and plastic each call for different care. - See it first. A camera often pays for itself when a line keeps backing up. - Check power. Threaders and larger machines may need more power than a standard outlet. - Ask about accessories. Cutters, cables and dies are often rented separately. ## How to use a drain machine 1. Find the cleanout, and protect the area from water and waste. 2. Wear gloves and eye protection, and read the machine's instructions. 3. Feed the cable by hand, then run the motor at low speed. 4. Work the blockage gradually without forcing the cable. 5. Retract the cable while it turns forward, and flush the line with water. 6. Clean the machine before returning it. ## Mistakes to avoid - Wearing cotton gloves or loose clothes. Spinning cables can grab them. - Forcing a cable. It can kink or damage a pipe. - Using a big cutter in a small line. It can jam or crack the pipe. - Working on live electrical. Lock out power before you touch it. - Skipping permits. Replacement work generally requires one. ## Tips before you rent - Bring pipe size and access details to the counter. - Ask for a quick demo, especially for cable machines. - Check return cleaning requirements. ## How to find plumbing tools near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by tool, rental length and location.
Learn more →Trencher, Trench Box & Shoring Rental
A trencher rental cuts narrow, clean trenches for irrigation, drainage and buried lines much faster than digging by hand. Choose a walk-behind or ride-on machine based on trench depth, width and soil, have utilities marked and compare suppliers for your dates. ## What a trencher is used for Trenchers cut for sprinkler lines, drain pipe, low-voltage cable, conduit and footings for small walls. For wider trenches, or where you need to dig around existing lines, a [mini excavator rental](/mini-excavator-rental/) is usually better. For repeated holes, a [post hole digger rental](/post-hole-digger-rental/) is the right call. ## Types of trenchers | Type | Best for | |---|---| | Walk-behind trencher | Irrigation and small residential lines | | Ride-on trencher | Longer runs and deeper cuts | | Skid steer trencher attachment | Contractors who already have a loader on site | | Vibratory plow | Pulling cable or pipe with little ground disturbance | ## How to choose the right trencher - Set depth first. Compare your required depth to the boom length on the listing. - Pick the width. Chain width should suit your pipe or cable and your backfill method. - Know your soil. Rocky or hard clay ground wears standard chains quickly, so ask about the chain. - Measure your path. Check gates, slopes and the number of turns you need to make. - Consider the length of the run. Long runs justify a ride-on machine. ## How to use a trencher 1. Have all underground utilities marked, and hand dig to expose lines you need to cross. 2. Mark the trench path with paint. 3. Start the engine, lower the boom slowly and let the chain get up to speed before it enters the ground. 4. Pull the machine steadily, letting the chain cut at its own pace. 5. Raise the boom before you turn or stop, and shut it down before clearing any jam. 6. Lay your line, backfill in layers and compact as you go. ## Mistakes to avoid - Digging before utilities are marked. A trencher can cut a line before you feel it. - Wearing loose clothing. Chains catch fabric and can pull you in. - Forcing the machine. Pushing too fast stalls the chain and wears the teeth. - Working on steep slopes. Machines can tip or slide. - Entering deep, unprotected trenches. Soil can collapse without warning. ## Tips before you rent - Soak hard ground a day or two ahead where it helps. - Ask how chain wear is charged and what replacement teeth cost. - Confirm you can transport the machine, or arrange delivery. - Plan for backfill and compaction, and consider a [plate compactor rental](/plate-compactor-rental/). ## How to find a trencher rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, check depth and chain type on each listing and request the rental online. Rates are set by each supplier and vary by machine size, rental length and location.
Learn more →Restroom Trailer Rental
A restroom trailer rental gives guests and crews real flushing toilets, running-water sinks, lighting and climate control in a towable unit. It is a step up from a standard portable toilet for weddings, events and long job sites, and needs level ground, power and a plan for water and waste service. ## When a restroom trailer makes sense Restroom trailers, also called bathroom trailers or portable restroom trailers, are self-contained units with separate stalls, sinks, mirrors and lighting. They feel much closer to an indoor bathroom than a single portable toilet. They are a popular choice for: - Weddings, receptions and private parties - Festivals, fairs, sporting events and fundraisers - Corporate events and VIP areas - Long construction projects and remote job sites - Disaster recovery and emergency response - Building renovations when the existing restrooms are out of service ## Types of restroom trailers and luxury units | Type | What you get | Good for | |---|---|---| | Luxury portable toilet | Single upscale unit with flushing toilet and sink | Small gatherings, VIP areas | | Two- to three-station trailer | Separate stalls in a compact trailer | Backyard weddings, small events | | Multi-station restroom trailer | Several stalls, often split men's and women's sides | Mid-size events and job sites | | Large restroom trailer | Many stalls, urinals and sinks | Large events and long-term sites | | ADA-accessible trailer or unit | Ramp or lift, wider doors, grab bars | Required accessible facilities | People often call these luxury porta potty rental or luxury portable bathroom rental, but most upscale units are trailers rather than single plastic stalls. ## How to choose the right restroom trailer Start with headcount and duration. The number of stalls you need depends on how many people attend, how long the event runs and whether alcohol is served, which increases use. Ask the supplier to recommend a size for your guest count and hours, and plan for accessible facilities where they are required. Then think about the site: - Placement. Trailers need a fairly level spot with room for the tow vehicle to back in and out. - Power. Most need electricity for lights, pumps and climate control. Ask whether a standard outlet works or if a generator is needed. - Water. Some trailers use an onboard fresh-water tank, others connect to a hose. Find out which. - Waste. Holding tanks need to be pumped. For multi-day events and job sites, ask about service schedules. ## Tips before you rent - Walk the delivery route and check for low branches, soft lawns and tight gates. - Place the trailer close enough for convenience but away from food service areas. - Light the path at night for guests. - Stock extra paper goods and soap for longer events. - Confirm whether attendant service is available for large events. - Check local permits for events or job sites that may require a specific number of restrooms. - In cold weather, ask how the supplier protects water lines from freezing. ## Request a restroom trailer rental Our marketplace partner does not list restroom trailer rentals yet. Use the request form on our contact page to tell us your city, dates and what you need, and we will reach out when we can connect you with a supplier that serves your area.
Learn more →Traffic Control & Safety Equipment Rental
Traffic control equipment rental covers the barricades, cones, signs and arrow boards that keep crews and drivers safe around work zones. Follow your traffic plan, check your permit and compare suppliers for your dates. ## What this equipment is used for Contractors, utilities, event organizers and property managers use this equipment for lane closures, parking lot work, utility cuts, road events and sidewalk detours. Safety gear such as eyewash stations and barriers can be rented in the same order. ## Common equipment | Equipment | Used for | |---|---| | Cones and delineators | Guiding drivers through a work zone | | Type I, II and III barricades | Marking and closing work areas | | Temporary signs and stands | Warning drivers ahead of the zone | | Arrow board | Directing lane merges | | Portable message board | Sharing changing information | | Water-filled or plastic barrier | Separating work areas from traffic | ## How to choose the right equipment - Start with your plan. Permit requirements or a traffic control plan will often set exact items and spacing. - Know your road speed. Higher speeds need longer warning distances and more devices. - Check day and night needs. Night work needs reflective devices and lighting. - Plan for pedestrians. Sidewalk closures need safe, accessible detours. - Count everything. Note quantities for each phase of work. ## How to set up a work zone 1. Get the required permits and a traffic plan before you start. 2. Brief your crew and assign flaggers where needed. 3. Place devices in the order that protects workers, starting upstream of the work. 4. Drive the zone as a motorist would, and fix anything confusing. 5. Check the setup regularly, and after wind or vehicle strikes. 6. Remove devices in reverse order when you finish. ## Mistakes to avoid - Skipping the permit. Work in a public road usually needs approval. - Leaving too little warning distance. Drivers need time to react. - Using damaged or dirty devices. Reflective surfaces only work if they're visible. - Leaving signs up after work ends. Outdated signs confuse drivers. - Blocking pedestrian routes. Accessible detours are often required. ## Tips before you rent - Share your plan so the supplier can quote exact quantities. - Ask about delivery, setup and pickup. - Ask how lost or damaged devices are charged. ## How to find traffic control equipment near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by item, rental length and location.
Learn more →Dolly & Hand Truck Rental
A dolly rental helps one or two people move appliances, boxes and heavy equipment without lifting them by hand. Choose an appliance dolly, hand truck or four-wheel dolly based on the load and your route, and compare suppliers for your dates. ## What a dolly is used for Dollies move refrigerators, washers, cabinets, boxed materials, pianos and machinery. Hand trucks handle stacked boxes and smaller appliances. Four-wheel dollies and machine skates carry wide or heavy loads across flat floors. For full pallets, see the [pallet jack rental](/pallet-jack-rental/) guide. ## Types of dollies | Type | Best for | |---|---| | Appliance dolly | Refrigerators, washers and stairs, with a strap | | Hand truck | Boxes, kegs and smaller loads | | Convertible hand truck | Switching between upright and platform use | | Four-wheel dolly | Large, flat or awkward loads | | Machine skates | Heavy machinery on hard, smooth floors | ## How to choose the right dolly - Check capacity. Use the item's real weight, and leave some margin. - Walk the route. Note stairs, thresholds, tight turns and elevator limits. - Protect the floor. Rubber wheels help on finished surfaces. - Look for the right wheels. Pneumatic tires suit rough ground, and stair climbers help on steps. - Add straps and blankets. They protect the load and keep it steady. ## How to use an appliance dolly 1. Clear the route and measure doors before lifting anything. 2. Empty and disconnect the appliance, and secure its doors. 3. Slide the dolly plate under the item and tighten the strap. 4. Tilt it back slowly until the weight rests over the wheels. 5. Move one step at a time on stairs, with a helper below the load. 6. Lower it slowly, then remove the strap. ## Mistakes to avoid - Working alone on stairs. A heavy appliance can get away quickly. - Skipping the strap. Loads can shift when the dolly tilts. - Exceeding capacity. Damaged frames and wheels can fail under load. - Pushing when you could pull. Pulling usually gives you better control on steps. - Forgetting floor protection. Narrow wheels can mark soft surfaces. ## Tips before you rent - Know the weight and dimensions of your heaviest item. - Ask whether straps and pads are included. - Pair it with a [utility trailer rental](/utility-trailer-rental/) if you need to move it across town. ## How to find a dolly rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by type, rental length and location.
Learn more →Bucket Truck Rental
A bucket truck rental puts a worker in a truck-mounted aerial bucket for signs, lighting, trees and utility-style work that moves from spot to spot. Confirm your height, side reach, licensing and operator needs, then compare suppliers for your dates. ## What a bucket truck is used for Bucket trucks serve sign installers, electricians, parking lot lighting crews, tree crews and facility teams. They suit jobs with several stops because the lift drives on the road. For one site, a towable or self-propelled machine may be simpler, so compare the [boom lift rental](/boom-lift-rental/) guide. ## Types of bucket trucks | Type | Best for | |---|---| | Light-duty truck | Signs, lighting and shorter reach work | | Articulating boom | Reaching up and over obstacles | | Telescopic boom | Straight reach at greater height | | Insulated truck | Work near electrical hazards, with proper training and testing | | Tree trimming truck | Tree work, sometimes with a chip box | ## How to choose the right bucket truck - Measure working height and side reach. Choose by the job, not only the headline height. - Check bucket capacity. Add the worker, tools and materials. - Ask about insulation. Never assume a truck is rated for electrical work. - Confirm the license. The truck's weight rating may affect who can drive it. - Check the setup area. You need firm ground, room for outriggers and traffic control if you're in a roadway. ## How to use a bucket truck 1. Confirm operators are trained, and read the manual and load chart. 2. Inspect controls, hydraulics, the bucket, harness anchor and outriggers. 3. Survey for power lines, traffic and soft ground. 4. Set the brake, chock the wheels and deploy outriggers on firm ground. 5. Wear a harness and lanyard as the manufacturer and rules require. 6. Stow the boom fully before driving. ## Mistakes to avoid - Assuming the truck is insulated. Verify rating and testing with the supplier. - Skipping outriggers. The truck can become unstable. - Overloading the bucket. Tools and materials count toward capacity. - Moving with the boom raised. Stow it unless the machine is designed for that use. - Setting up without traffic control. Road work often requires a permit and plan. ## Tips before you rent - Ask if the rental is bare or comes with an operator. - Ask about insurance and any road-use limits. - Book early if you need a specific height or an insulated truck. ## How to find a bucket truck rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by truck size, rental length and location.
Learn more →Excavator, Skid Steer & Earthmoving Rental
An excavator rental gives you the digging power for foundations, trenches, utility work, grading and demolition. Choose the machine by dig depth, weight and how much room you have on site, then compare suppliers by location, delivery and rates for your dates. ## What an excavator is used for Excavators dig footings and basements, cut trenches for water and sewer lines, load dump trucks, clear stumps and break up concrete when fitted with a hydraulic hammer. This category also covers the machines that often work beside them: backhoes, wheel and track loaders, skid steers, dozers, graders and compact tractors. If you know the exact machine, go straight to the [mini excavator](/mini-excavator-rental/), [skid steer](/skid-steer-rental/), [backhoe](/backhoe-rental/) or [dozer](/dozer-rental/) guide. ## Types of excavators | Type | Best for | |---|---| | Mini excavator (under about 10 tons) | Backyards, utility trenches, pools and tight access | | Midi excavator | Larger trenches and light site work where a mini is too small | | Full-size crawler excavator | Mass digging, foundations and truck loading on open sites | | Wheeled excavator | Road and urban work that moves often on paved surfaces | | Long-reach excavator | Ponds, ditches and slopes that need extra reach | ## How to choose the right excavator - Start with dig depth. Compare your deepest cut to the machine's listed maximum, and leave some margin. - Measure your access. Gate width, overhead wires and ground conditions often decide the size before the job does. - Think about tail swing. Zero or reduced tail swing models keep the rear of the machine close to the tracks, which helps beside walls and in traffic. - Match the ground. Rubber tracks protect paving and finished surfaces. Steel tracks hold up better on rock and demolition debris. - Plan your attachments. Buckets, thumbs, breakers and augers can change the job, so confirm the machine has the hydraulics for them. ## How to use an excavator safely 1. Have utilities marked before any digging, and hand dig near the marks. 2. Walk the site and check for soft ground, slopes, overhead lines and people in the swing radius. 3. Do a daily check of tracks, hydraulic hoses, fluids and the bucket pins. 4. Use the seat belt, set the machine on level ground where you can, and dig with the tracks square to the trench. 5. Keep spoil piles back from the edge of the trench and keep the load low when you travel. 6. Lower the bucket to the ground and shut the machine down before you leave the seat. ## Mistakes to avoid - Digging before utilities are marked. Striking a gas or power line is dangerous and expensive. - Swinging over people or trucks. Keep everyone outside the swing radius. - Undercutting the machine. Digging under your own tracks can collapse the edge. - Renting too small. A machine that can barely reach depth will be slow and hard on the job. - Sending workers into an unprotected trench. Deep trenches need protective systems set up by a competent person. ## Tips before you rent - Confirm the delivery route and whether a trailer can reach your unloading spot. - Ask about damage waivers, fuel and return condition. - Ask what wear on teeth and tracks counts against you. - Line up where your spoil will go. Hauling is often the biggest surprise on a dig. ## How to find an excavator rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, check the size and attachments on each listing, and request the rental online. Rates are set by each supplier and vary by machine size, rental length and location.
Learn more →Air Compressor & Air Tool Rental
An air compressor rental powers jackhammers, nailers, sandblasters, spray guns and other air tools. Add up the CFM and PSI your tools need, leave some headroom and choose a portable or towable unit, then compare suppliers for your dates. ## What an air compressor is used for Compressors run breakers and paving hammers, framing and roofing nailers, sandblasters, chipping hammers, impact wrenches and paint sprayers. They are also used for blowing out lines and cleaning. If your job is breaking concrete, see the [jackhammer rental](/jackhammer-rental/) guide, too. ## Types of air compressors | Type | Best for | |---|---| | Small electric unit | Trim nailers and small indoor work | | Portable gas unit | Framing and roofing nailers on site | | Towable diesel unit | Breakers, sandblasting and multiple tools | | Large towable unit | Heavy blasting and big industrial jobs | | Oil-free unit | Breathing-air and clean applications, when properly set up | ## How to choose the right compressor - Add up the CFM. Check each tool's air use at its required PSI, and add up tools that will run together. - Leave headroom. Aim for more capacity than your total so the compressor isn't running flat out. - Check PSI. Most air tools are rated around 90 PSI, but sandblasting and specialty tools vary. - Pick power and portability. Consider power at the site, ventilation and how you will move the unit. - Match hoses. Long or small hoses cut pressure at the tool, so ask about diameter and length. ## How to use an air compressor 1. Place it on level ground with good airflow, and outdoors if it burns fuel. 2. Check oil, fuel and coolant on engine-driven units. 3. Inspect hoses and fittings, and use whip checks on larger connections. 4. Start the compressor and let it build pressure before you connect the load. 5. Set the regulator to your tool's rating. 6. When finished, shut it down, release the pressure and drain the tank if the supplier requires it. ## Mistakes to avoid - Undersizing. A small compressor can't keep up with breakers or blasting. - Running engines indoors. Exhaust can build up quickly. - Using worn hoses. A loose or failed hose can whip with dangerous force. - Pointing air at people. Compressed air can cause serious injury. - Forgetting tow ratings. Confirm your vehicle and hitch before you pick up a towable unit. ## Tips before you rent - Bring tool specs, including CFM and PSI. - Ask whether hoses, fittings, oilers and tools are included. - Confirm fuel type and return condition. - Ask the supplier to help if you plan to run several tools at once. ## How to find an air compressor rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, check CFM on each listing and request the rental online. Rates are set by each supplier and vary by size, rental length and location.
Learn more →Paint Sprayer Rental
A paint sprayer rental lets you coat siding, fences, decks, ceilings and whole interiors far faster than a roller, with a smooth, even finish. Most renters choose an airless sprayer sized to the coating and the square footage, plus the right tip. ## What a Paint Sprayer Is Used For Paint sprayers atomize paint and lay it down in a fan pattern, so you can cover large or textured surfaces quickly. They shine on exterior siding, wood and vinyl fences, decks, garage and basement walls, new drywall, ceilings, cabinets and trim. Rolling a privacy fence or a stucco wall by hand is slow and uneven; spraying gets paint into gaps and texture that a roller misses. The trade-off is setup and cleanup time and the need to mask off everything you do not want painted. ## Types of Paint Sprayers | Type | How it works | Best for | |---|---|---| | Airless sprayer | A pump pushes paint at high pressure through a small tip | Walls, ceilings, siding, fences, large areas; handles thick latex | | HVLP sprayer | High volume of air at low pressure | Cabinets, doors, furniture, trim; fine finish, less overspray | | Compressed air spray gun | Air compressor drives a spray gun | Shop finishing, automotive-style work, smaller pieces | | Texture sprayer | Hopper gun or pump for heavy material | Drywall texture, knockdown, popcorn ceilings | For most house painting, an airless paint sprayer rental is the go-to. A paint spray gun rental with HVLP or a compressor setup makes more sense when finish quality on smaller pieces matters more than speed. ## How to Choose the Right Sprayer - Match the coating. Thick exterior latex and primers need an airless pump with enough pressure and a larger tip. Stains and lacquers spray well through smaller tips or HVLP. - Match the job size. A single room or fence section is fine with a smaller airless unit. Whole-house exteriors or commercial walls benefit from a larger pump that can feed a longer hose without losing pressure. - Pick the tip. Tip size controls the fan width and flow. Ask the supplier which tips come with the rental and which suit your paint; the paint can often lists a recommended tip range. - Check hose length. You want enough hose to reach the work without moving the pump every few minutes, especially on ladders or second stories. ## Tips Before You Rent - Prep is most of the job. Clean and dry the surface, scrape loose paint, and mask windows, fixtures, floors and anything nearby, including cars and landscaping. - Check the weather for exterior work. Wind carries overspray a long way, so pick a calm day and stay within the temperature range on the paint label. - Strain your paint to keep debris from clogging the tip. - Wear a respirator or mask rated for paint mist, eye protection and coveralls. Ventilate indoor spaces well. - Airless sprayers run at very high pressure. Never point the gun at anyone, keep your hand away from the tip, engage the trigger lock when you pause, and relieve pressure before changing or clearing a tip. Injection injuries from airless spray require immediate medical care. - Flush the pump and hose thoroughly before return. Ask the supplier about their cleaning expectations and what solvent or water flush they want for your paint type. ## How to use a paint sprayer These steps apply to the airless sprayers most people rent for walls, ceilings, fences and siding. 1. Mask and cover everything you do not want painted, including windows, floors, fixtures, roofs and nearby cars. Overspray drifts farther than you expect. 2. Strain the paint into a clean bucket, and thin it only if the paint label allows thinning for spray application. 3. Put on a respirator rated for paint mist, safety glasses, a hat and coveralls or old clothes. 4. Prime the pump: drop the intake into the paint, set the valve to prime and run the pump until paint flows steadily out of the return tube. 5. Switch the valve to spray and trigger into a waste bucket until clean, steady paint comes out with no spitting. 6. Install the tip and guard, start at low pressure and raise it only until the spray fan is even with no heavy lines at the edges. 7. Hold the gun square to the surface, about a foot away, and move your whole arm, not your wrist. Start moving before you pull the trigger, release it before you stop, and overlap each pass by about half. 8. If the tip clogs, lock the trigger, turn the tip to its reverse position, spray into the waste bucket, then turn it back. 9. Before cleaning or removing the tip, relieve the pressure: turn the sprayer off, open the prime valve and trigger into the bucket. 10. Flush with water for latex or the solvent listed on the paint can until it runs clear, then clean the filters, tip and guard before return. ## Mistakes to avoid - Putting a finger or hand near the tip, or wiping it while the system is pressurized. An airless sprayer can inject paint into skin, which is a medical emergency even if the wound looks tiny. - Skimping on masking and getting overspray on cars, windows, roofing or a neighbor's fence. - Spraying outdoors on a windy day, which carries mist far and leaves a rough, dry finish. - Flicking the wrist or swinging the gun in an arc, so the middle of each pass is thick and the ends are thin. - Running the pressure too high, which wastes paint, increases overspray and causes bounce-back. - Leaving paint sitting in the hose and gun during a long break, where it starts to dry and clog the filters. - Using a fine-finish tip with a thick coating such as elastomeric or block filler, which clogs constantly and never fans out properly. ## Pro tips - On most airless tips, the first digit doubled is roughly the fan width in inches, and the last two digits are the orifice size. Ask the supplier which tip suits your coating. - Spray corners and edges first, then fill in the open areas with long passes. - Back-roll the first coat on rough siding, block or new drywall so the paint works into the surface. - Plan on using more paint than you would with a roller, and buy enough from a single batch so the color matches. - Practice your distance and speed on cardboard before you touch the wall. Exterior jobs start with clean surfaces, so a [pressure washer rental](/pressure-washer-rental/) a day or two ahead is a good first step. For high walls and ceilings, a [scaffolding rental](/scaffolding-rental/) gives you a safer reach than a ladder. ## How to Find a Paint Sprayer Rental Near You Use the Browse equipment button to search for a paint sprayer rental near me by city and rental dates. You will see live listings from rental suppliers on the Derental marketplace, so you can compare airless sprayers, HVLP units and spray gun rental options in one place. Compare what each listing includes, such as hose length, gun and tips, plus pickup or delivery and the supplier's cleaning terms. Rates are set by each supplier and vary by sprayer type and size, rental length, location and delivery. Daily rentals are common for a weekend fence or a few rooms, while weekly terms can suit a full exterior repaint. When you have found the right paint gun for rent, request it online and confirm the details with the supplier before your start date.
Learn more →Brush Hog & Brush Cutter Rental
A brush hog rental gives you a heavy rotary cutter that mows through tall grass, weeds, briars and saplings that would choke a lawn mower. You can rent a bush hog as a tractor or skid steer attachment, or a self-propelled walk-behind brush cutter. ## What a Brush Hog Is Used For A brush hog, also called a rotary cutter or bush hog mower, uses a heavy, free-swinging blade under a thick steel deck to chop down overgrowth. It is the go-to tool for clearing overgrown lots and pastures, cutting fence lines and ditches, reclaiming land that has gone wild, opening trails, and knocking back field growth before a build. A standard lawn mower will stall, overheat or break in this kind of material. A brush cutter is built to take the abuse, though it leaves a rougher cut than a lawn mower. ## Types of Brush Cutters | Type | How it is powered | Best for | |---|---|---| | Tractor rotary cutter (3-point) | Tractor PTO | Pastures, fields and large overgrown acreage | | Skid steer brush cutter | Skid steer high- or standard-flow hydraulics | Saplings, thick brush and land clearing on job sites | | Walk-behind brush mower | Its own engine | Smaller lots, tight spots, areas a tractor cannot reach | | Handheld brush cutter | Its own engine | Trimming around fences, trees and steep banks | Cutter width and the size of material it can handle vary by model. Ask the supplier the maximum stem diameter the unit is rated to cut, and what carrier it needs. ## How to Choose the Right Cutter - Assess the growth. Tall grass and weeds are fine for a walk-behind brush mower or tractor rotary cutter. Woody saplings and thick brush are better suited to a skid steer brush cutter rated for that diameter. - Match the attachment to the carrier. A tractor cutter must match the tractor's 3-point category and PTO horsepower. A skid steer cutter must match the machine's hydraulic flow. If you do not have a carrier, look at tractor and brush hog rental packages or a self-propelled unit. - Consider the terrain. Steep slopes, ditches and wet ground affect which machine is safe. Walk-behind units handle tight areas; tractors and skid steers cover open ground fast. - Size the job. A small backyard thicket is a walk-behind job. Several acres of pasture is a tractor job. ## Tips Before You Rent - Walk the area first. Flag stumps, rocks, holes, culverts, wire, old fencing and debris. Hidden metal and rock are the most common way to damage a cutter or turn it into a projectile. - Brush cutters throw debris a long way. Keep bystanders, pets and vehicles well clear, and keep the deck's chain guards or shielding in place. - Wear eye protection, hearing protection, long pants, boots and gloves. On tractors and skid steers, use the seat belt and keep the rollover protection in place. - Raise the cutter for very tall or dense growth and make a second lower pass if needed. - Never reach under the deck or clear wrapped vines until the engine is off and the blade has completely stopped. - Watch for slopes and drop-offs, and mow across slopes only as the machine's manual allows. - Check whether you need a trailer to haul the unit, or whether the supplier offers delivery. ## How to Find Brush Hog Rental Near You Use the Browse equipment button to search for brush hog rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including bush hog rental attachments, skid steer brush cutters and self-propelled brush mowers. Compare cutting width, rated stem diameter, carrier requirements and whether a tractor or skid steer can be bundled. Rates are set by each supplier and vary by cutter type and size, rental length, location and delivery. A day often covers a residential lot, while acreage or land clearing may need several days. When you are ready to rent a brush mower near you, request it online and confirm the details with the supplier.
Learn more →Dozer Rental
A dozer rental puts a tracked machine with a large front blade on your site to push, spread and grade dirt, gravel and debris. Small dozers handle residential pads and driveways, while larger machines move serious earth, so size the dozer to the material, site and finish grade you need. ## What a dozer is used for A bulldozer is built to push. Its wide blade cuts into soil and moves it forward, while the tracks give traction and spread the machine's weight. Dozers are the go-to machine for shaping ground before building, paving or planting. Common jobs include: - Clearing and stripping topsoil from a lot - Rough and finish grading for house pads, driveways and parking areas - Spreading gravel, fill and base material - Building and maintaining farm roads, pond banks and berms - Backfilling trenches and foundations - Pushing brush and debris into piles ## Dozer sizes and blade types | Size | Typical use | |---|---| | Small or compact dozer | Residential grading, driveways, landscaping, tight sites | | Mid-size dozer | Site prep, road building, larger lots | | Large dozer | Heavy earthmoving, mass grading, rough ground | Blade style matters as much as size: - PAT blade (power angle tilt). Common on small dozers. Angles and tilts hydraulically for fine grading and ditching. - Straight blade. Good for grading and leveling with control. - Semi-U and U blades. Curved sides hold more material for pushing loads over distance. Many dozers can also be fitted with a rear ripper to break up hard ground, and some are available in low ground pressure configurations with wider tracks for soft or wet soil. ## How to choose the right dozer A small dozer rental is the right fit for most homeowners, landscapers and builders working on residential lots. It is easier to transport, maneuvers in tighter spaces and is precise enough for finish grading. Step up in size when you are moving large volumes, working in heavy clay or rock, or pushing material over longer distances. Ask yourself: - How much material am I moving, and how far? - Do I need a finished grade or just rough shaping? - Is the ground soft or wet, which favors wider tracks? - How much room is there to turn and work? - Will a skid steer or compact track loader do the job instead? Many suppliers offer grade control or laser-ready options. Ask if you need precise slopes for drainage. ## Tips before you rent - Call 811 a few days before any digging or grading so underground utilities are marked. - Check for overhead lines, septic systems and soft spots before moving the machine onto the site. - Plan transport. Even a small dozer usually needs a heavy-duty trailer and properly rated tow vehicle, and larger machines generally require supplier delivery on a lowboy trailer. - Get familiar with the controls in an open area before working near structures or slopes. - Work up and down slopes rather than across them where possible. - Wear a seatbelt and keep everyone clear of the machine's path, especially when reversing. - Check local rules on grading, erosion control and stormwater before disturbing large areas. ## Dozer rental prices and how to find one near me Dozer rental cost is set by each supplier and varies by machine size, attachments, rental length, location and delivery. Weekly and monthly terms are common on larger projects. To find a bulldozer for rent near me, search by city and the dates you need it. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace. Compare a few suppliers' rates, delivery options and terms, then request the rental online and confirm the details with the supplier. Use the Browse equipment button to see dozers available in your area.
Learn more →Utility & Flatbed Trailer Rental
A utility trailer rental lets you haul mulch, tools, machines and materials without buying a trailer. Choose an open, flatbed or enclosed trailer based on your load, confirm your vehicle can tow it safely, and compare suppliers for your dates. ## What a utility trailer is used for Utility trailers move landscaping materials, lumber, tools, furniture, small machines and jobsite debris. Flatbeds and equipment trailers carry skid steers, mini excavators and other machines with ramps and tie-downs. Enclosed trailers keep tools and materials dry and locked. If you need to tip a load out, see the [dump trailer rental](/dump-trailer-rental/) guide. ## Types of trailers | Type | Best for | |---|---| | Open utility trailer | Mulch, lumber, tools and yard waste | | Enclosed cargo trailer | Tools, furniture and materials that need protection | | Flatbed trailer | Long or wide loads, pallets and building materials | | Equipment trailer | Skid steers, mini excavators and other machines | | Tilt trailer | Loading low machines without separate ramps | ## How to choose the right trailer - Start with weight. Add the load, the trailer and anything else you tow, then compare it to your vehicle's tow rating. - Check the hitch. Match the ball size, hitch class and wiring plug before pickup. - Measure the load. Confirm deck length, width and any side rail clearance. - Look at the brakes. Heavier trailers usually need working trailer brakes and a compatible controller. - Plan for loading. Ramps, a tilt deck or a loading dock can decide which trailer works. ## How to load and tow safely 1. Inspect tires, lights, safety chains, coupler and brakes before you leave. 2. Place about 60% of the load ahead of the trailer axle, keeping heavy items low and centered. 3. Secure the load with rated straps or chains at several points. 4. Latch the coupler, cross the safety chains and connect the wiring. 5. Test the lights and brakes, and drive slowly at first. 6. Allow extra stopping distance, take wider turns and recheck the straps after a few miles. ## Mistakes to avoid - Loading too far back. Rear-heavy trailers can sway badly. - Guessing at weight. Exceeding a tow rating affects braking and control. - Using weak straps. Check each strap's rating against the load. - Forgetting tongue weight. It affects steering and hitch limits. - Backing up without a spotter. Tight spaces and short trailers are harder than they look. ## Tips before you rent - Bring your vehicle's tow rating and hitch details. - Ask which ramps, straps and adapters are included. - Take dated photos at pickup and return. ## How to find a utility trailer rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by trailer type, rental length and location.
Learn more →Skid Steer Rental
A skid steer rental gets you a compact, highly maneuverable loader that can dig, grade, lift and carry, and switch jobs in minutes by swapping attachments. Choose the frame size and attachments for your job, then compare suppliers on rates, delivery and terms. ## What a skid steer is used for A skid steer loader is a compact machine with lift arms on either side of the operator cab and a quick-attach plate on the front. It steers by driving the wheels or tracks on each side at different speeds, which lets it turn in its own footprint. That makes it one of the most versatile machines on a job site or property. Common jobs include moving dirt, gravel and mulch, grading driveways and yards, backfilling trenches, clearing brush, loading trucks, carrying pallets, removing snow and cleaning up demolition debris. Many people still call any skid loader a bobcat, so if you have searched for a bobcat rental, a skid steer is the machine you are looking for, whichever manufacturer built it. ## Wheeled vs tracked and frame sizes | Option | What to know | |---|---| | Wheeled skid steer | Good on pavement, concrete and firm ground; generally quicker on hard surfaces | | Compact track loader | Rubber tracks spread weight for soft, muddy or sandy ground and slopes; gentler on lawns | | Small frame | Fits tighter spaces and lighter trailers; lower lifting capacity | | Medium and large frame | More lifting and pushing power for heavy material and bigger attachments | Skid steers are also described by lift path. Radial-lift machines swing the arms in an arc and are handy for digging and pushing. Vertical-lift machines raise loads more straight up, which helps when loading trucks or lifting pallets high. ## Attachments to consider The real value of a skid steer loader rental is the attachment list. Popular options include: - General purpose or dirt bucket for digging and moving material - Pallet forks for lifting materials and supplies - Auger for fence posts and footing holes - Grapple for brush, logs and debris - Trencher for irrigation or utility trenches - Box blade or land plane for grading - Brush cutter for overgrown lots Confirm with the supplier which attachments are available for the machine you choose and how they are quoted. ## Tips before you rent - Plan transport. A skid steer requires a properly rated trailer and tow vehicle. Check the machine's weight against your truck and trailer ratings, or ask the supplier about delivery. - Call 811 before digging, trenching or augering. Wait for underground utilities to be marked. - Get a walkthrough. Learn the controls, safety interlocks and how to change attachments before you start. - Wear your seat belt and keep the lap bar down. Never let anyone stand under raised arms or near the machine while it is turning. - Carry loads low. Keep the bucket low while moving, especially on slopes, and travel straight up and down grades rather than across them. - Check ground conditions. Soft ground, soggy lawns and steep slopes are where tracked machines earn their keep. ## How to use a skid steer Take a few minutes on flat, open ground to learn the machine before you start the real work. 1. Walk the site first. Call 811 before any digging, and mark soft ground, slopes, holes and overhead power lines. 2. Do a walkaround: check tires or tracks, look for leaking hydraulic hoses, check fluid levels and make sure the attachment is undamaged. 3. Climb in using the grab handles and steps, never the control levers. Fasten the seat belt and lower the seat bar, which on most machines unlocks the controls. 4. Ask the supplier which control pattern the machine uses, then practice driving, turning and raising the arms at low throttle in an open area. 5. To pick up an attachment, line up square, tilt the coupler forward, drive into it, curl back and engage the locking pins. Check from the outside that both pins are fully through. 6. Carry loads low, with the bucket just high enough to clear the ground, and travel slowly with a full bucket. 7. Go straight up and down slopes, never across them, with the heavy end uphill: an empty machine goes forward up and backs down; a loaded one does the opposite. 8. Use gentle, wide turns on lawns and finished surfaces instead of spinning in place. 9. To shut down, lower the attachment flat to the ground, set the parking brake, idle down and turn off the engine before you raise the seat bar. 10. Scrape off mud, refuel if the supplier asks for it, and return every attachment that came with the machine. ## Mistakes to avoid - Climbing out with the arms or bucket raised, or reaching under raised arms. That is a crush hazard. - Carrying a full bucket high. The machine gets top-heavy and can tip forward or sideways on uneven ground. - Spinning in place on a lawn, pavers or new asphalt. A wheeled machine rips up turf, and tracks scuff hot pavement. - Not confirming the coupler pins are locked, so the attachment drops off while lifting. - Loading past the rated operating capacity on the machine's decal, especially with heavy, wet soil or stone. - Driving sideways across a slope or along the edge of a trench or retaining wall. - Making sharp turns on a tracked machine over curbs, rocks or stumps, which can throw a track. ## Pro tips - Feather the controls. Small movements give smoother cuts and a lot less bouncing. - For finish grading, back-drag with the bucket flat or slightly tipped forward, working in one direction. - Lay plywood across lawns, sidewalks or driveways you need to cross repeatedly to keep ruts and cracks down. - Before the rental, confirm that your trailer and tow vehicle are rated for the machine plus its attachments, or have the supplier deliver it. - On a multi-day rental, ask whether the supplier expects you to grease the pivot points daily. If the job is mostly digging rather than moving material, compare a [mini excavator rental](/mini-excavator-rental/). To haul away spoil, pair the skid steer with a [dump trailer rental](/dump-trailer-rental/). ## How to find a skid steer rental near me Rates are set by each supplier and vary by frame size, wheeled or tracked configuration, attachments, rental length, location and delivery. Daily, weekly and monthly options are common, and longer rentals often make sense for multi-week projects. To rent a skid loader near me, use the Browse equipment button to search by your city and rental dates. You will see live skid loader listings from rental suppliers on the Derental marketplace. Compare a few suppliers on machine size, track or wheel options, attachments, delivery and terms, then request the machine online. Have your job details ready, such as the material you are moving, the ground conditions and your access width, so you can pick the right skid steer the first time.
Learn more →Concrete Saw Rental
A concrete saw rental lets you make clean, straight cuts through concrete, asphalt, block, brick and stone using a diamond blade. Choose a handheld cut-off saw for shallow, tight or vertical cuts and a walk-behind saw for long, deep cuts in slabs and pavement. ## What a Concrete Saw Is Used For Concrete saws cut hard material where a jackhammer would leave a ragged edge. Typical jobs include cutting control joints in fresh slabs, trenching a garage or basement floor for plumbing or electrical, cutting out a section of driveway or sidewalk for repair, opening doorways or windows in block walls, cutting pavers and curbs, and squaring up concrete before demolition. A clean saw cut keeps the remaining slab intact and gives patches and new pours a neat edge. ## Types of Concrete Saws | Type | Best for | Notes | |---|---|---| | Handheld cut-off saw (quickie saw) | Pavers, block, curbs, shallow slab cuts, walls | Gas or electric; versatile but limited depth | | Walk-behind saw (flat saw) | Long, straight cuts in slabs, driveways and roads | Rolls on wheels for straight lines; deeper cuts | | Electric concrete saw | Indoor work and enclosed spaces | No engine exhaust; still needs dust control | | Wall or ring saw | Deep cuts in walls and thick concrete | Specialty tools for openings and thick sections | | Masonry or tile saw | Brick, block, pavers and stone on a table | Material is fed to a fixed blade, often with water | Cut depth is set by blade diameter. Larger blades cut deeper, and very thick concrete may need cuts from both sides or a specialty saw. Ask the supplier which blade sizes are available. ## How to Choose the Right Saw - Measure the cut depth and length. A few pavers or a short trench suit a quickie saw rental. A long run across a driveway or slab suits a walk behind concrete saw rental. - Consider where you are cutting. Indoors, choose an electric saw; gas engines produce carbon monoxide and should not be run in enclosed spaces. - Match the blade to the material. Cured concrete, green concrete, asphalt and masonry wear blades differently. Ask for a diamond blade suited to your material, and check whether the blade is included or charged for wear. - Plan for dust and water. Most saws can be fitted with water feed to control dust and cool the blade. Wet cutting is strongly recommended. ## Tips Before You Rent - Call 811 before cutting slabs or pavement over the ground, and scan or check plans for rebar, post-tension cables, conduit and pipes inside the concrete. - Snap a chalk line and cut along it in steady passes rather than forcing full depth at once. - Silica dust from cutting concrete is a serious lung hazard. OSHA's silica standard applies on job sites; use water suppression or vacuum dust collection, and wear an appropriate respirator. - Wear eye and face protection, hearing protection, gloves, long sleeves and steel-toe boots. - Keep both hands on a handheld saw, stand to the side of the blade line, and watch for kickback when the upper front of the blade contacts the material. - Let the blade stop fully before setting the saw down, and never cut with a damaged or cracked blade. ## How to Find Concrete Saw Rental Near You Use the Browse equipment button to search concrete saw rental near me by city and rental dates. You will see live inventory from rental suppliers on the Derental marketplace, including handheld cut-off saws, walk-behind flat saws, electric concrete saw rental options and masonry saws. Compare blade size and depth, power type, water kit and blade terms. Rates are set by each supplier and vary by saw type, blade, rental length, location and delivery. When you are ready to rent a concrete saw near you, request it online and confirm blade and pickup details with the supplier.
Learn more →Storage & Shipping Container Rental
A storage container rental gives your site or property secure, weatherproof space for tools and materials. This category also covers job offices. Choose a size, measure your delivery space and compare suppliers for your dates. ## What these are used for Contractors use containers to lock up tools and materials overnight. Homeowners use them during remodels and moves. Businesses add seasonal inventory space. Job offices give site teams a desk, power and a place for plans. For debris instead of storage, see [dumpster rental](/dumpster-rental/). ## Types and sizes | Type | Best for | |---|---| | 10-foot container | Tight sites and small remodels | | 20-foot container | Most jobsites and home projects | | 40-foot container | Large material loads and long projects | | High-cube container | Extra height for tall items | | Mobile office trailer | Site management and meetings | | Container office | Secure office space with a smaller footprint | ## How to choose the right container - Measure what's going in. Include stacked materials and room to walk. - Measure the delivery path. Trucks often need much more length and overhead clearance than the box itself. - Check the ground. A firm, level surface prevents doors from binding. - Consider security. Ask about lock boxes and heavy-duty locks. - Think about access. Decide which way the doors should face before delivery. ## How to prepare for delivery 1. Choose the spot, and check slope, overhead wires and trees. 2. Check your city's rules and any permit needed. 3. Clear the path, and mark the location. 4. Be on site at delivery to confirm placement and door direction. 5. Lock the container with a good lock, and load heavy items evenly. 6. Clear it out before pickup, and confirm how it should be left. ## Mistakes to avoid - Measuring only the container. The truck needs space too. - Placing it on soft ground. It can sink and jam the doors. - Storing hazardous materials without checking. Many suppliers restrict fuel and chemicals. - Blocking fire access or a driveway. Plan around required clearances. - Leaving moisture-sensitive items without airflow. Containers can get condensation. ## Tips before you rent - Ask what's included, such as delivery, pickup and lock boxes. - Ask about minimum rental periods. - Take dated photos at delivery. ## Shipping container rental for jobsites Shipping containers, also called conex boxes, are steel boxes that keep tools and materials secure and dry on a jobsite. The 20-foot size fits most sites, and 40-foot containers hold larger loads. High-cube containers add extra height. Ask about lock boxes, roll-up or swing doors, and shelving. If you're looking to buy a container, or rent-to-own, see [Shipping Container World](https://shippingcontainer.world/). ## Job site offices and trailers Office trailers and container offices give site teams a desk, power and a place to meet. Plan for power, steps and any permits, and check that the delivery truck can reach the spot. | Need | Common choice | |---|---| | Tool and material storage | 20-foot shipping container | | Large or bulky materials | 40-foot or high-cube container | | Site office | Office trailer or container office | | Small site | 10-foot container | | Debris | A [dumpster rental](/dumpster-rental/), not a storage container | ## How to find a storage container near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by size, rental length and location.
Learn more →Sandblaster Rental
A sandblaster rental strips rust, paint and coatings from metal and masonry with compressed air and abrasive media. Match the blaster to your air supply, media and containment plan, then compare suppliers for your dates. ## What a sandblaster is used for Blasting prepares steel, trailers, equipment, tanks and some masonry for repair or new coatings. Lighter media can clean softer surfaces. Most units need a compressor that can keep up, so also read the [air compressor rental](/air-compressor-rental/) guide. ## Types of blasters | Type | Best for | |---|---| | Pressure pot blaster | Fast stripping on larger jobs | | Siphon blaster | Small parts and light cleaning | | Blast cabinet | Contained work on small parts | | Wet blaster | Lower dust, with water and slurry to manage | | Soda blaster | Softer surfaces and coatings | ## How to choose the right blaster - Check the air first. Compare the blaster's CFM and PSI needs to your compressor. - Choose the media. It affects speed, surface damage and cleanup. - Consider the surface. Thin sheet metal can warp or be damaged. - Plan containment. Tarps, curtains and collection can limit spread. - Check nozzle size. Bigger nozzles work faster but use far more air. ## How to use a sandblaster safely 1. Test old paint for lead and other hazards before you start. 2. Wear a supplied-air blast hood and protective clothing when the job requires it. 3. Set up containment and keep other people away. 4. Connect rated hoses, with whip checks and a deadman control. 5. Test on a scrap or hidden area. 6. Keep the nozzle moving, then collect the spent media and dispose of it properly. ## Mistakes to avoid - Using a dust mask for blasting. Abrasive dust can be dangerous and needs the right protection. - Undersizing the compressor. Pressure drops and work slows. - Using damp media. It clogs the system. - Blasting without testing coatings. Lead dust is a serious hazard. - Leaving spent media behind. Cleanup and disposal rules can apply. ## Tips before you rent - Share your surface, coating and square footage. - Ask what hoses, nozzles and safety gear are included. - Ask whether the supplier sells or restricts specific media. ## How to find a sandblaster rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine, rental length and location.
Learn more →Boom Lift Rental
A boom lift rental puts a work platform on a hydraulic arm so you can reach high, hard-to-access spots on buildings, trees and structures. Choose telescopic or articulating, match working height and outreach, and make sure every operator is trained before you book. ## What a boom lift is used for A boom lift, also called a man lift or cherry picker, raises one or more workers in a platform or bucket at the end of a hydraulic boom. Unlike a scissor lift, which only goes straight up, a boom lift can reach up and out, so the platform can get over obstacles, past a roofline or into a ceiling area that the base cannot drive under. Common jobs include exterior painting and siding work, window and gutter installation, signage, lighting and electrical work, tree trimming, steel erection, roofing access, warehouse maintenance, and building inspections. Contractors rent them when ladders or scaffolding would be slow, unsafe or impossible to set up. ## Types of boom lifts | Type | Best for | |---|---| | Telescopic (straight) boom | Maximum height and horizontal reach in a straight line, open job sites | | Articulating (knuckle) boom | Reaching up and over obstacles, working around roofs, pipes and trees | | Towable boom lift | Homeowners and small contractors; tows behind a pickup and sets up on outriggers | | Electric or hybrid boom | Indoor work and noise- or emissions-sensitive sites | | Rough terrain (diesel) boom | Uneven ground, dirt and gravel on construction sites | An articulating boom lift rental is the usual choice when something is in the way. A telescopic boom gives the most reach when you have a clear path. A towable boom lift rental fits jobs where you need to move a lift between sites yourself and do not need extreme height. A cherry picker truck rental, with the boom mounted on a truck, is another option suppliers may offer for road-side and utility-style work. ## How to choose the right boom lift - Know your working height. Measure the highest point you need to reach and remember that working height is higher than platform height. - Know your outreach. Measure how far out from where the base can sit you need the platform to go. - Check platform capacity. Add up the weight of workers, tools and materials. - Check ground and access. Gate widths, soft ground, slopes and indoor floor load limits all narrow your options. - Pick a power source. Electric for indoors, diesel or dual-fuel for rough outdoor sites. ## Tips before you rent - Train operators. OSHA requires aerial lift operators to be trained on the type of lift they use. Make sure anyone running the machine has completed training and is familiar with the specific model. - Wear fall protection. Use a full-body harness with a lanyard attached to the platform's designated anchor point, not to nearby structures. - Inspect before use. Do a pre-start check of controls, tires, hydraulics, guardrails and emergency lowering every day. - Watch overhead hazards. Keep the required clearance from power lines and treat every line as energized. - Respect wind and slope limits. Follow the manufacturer's limits and never drive elevated on uneven ground unless the machine is rated for it. - Plan transport. Towables need a properly rated hitch and tow vehicle. Self-propelled lifts are usually delivered. ## How to use a boom lift Boom lift operators must be trained before they run the machine, and fall protection is required in the basket. These steps assume a trained operator. 1. Walk the work area and look for overhead power lines, drop-offs, holes, soft ground and slopes, and set up a clear zone around the machine. 2. Do a pre-start inspection: tires, hydraulic leaks, guardrails, gate, controls, emergency stop and the manual or placards on the machine. 3. Put on a full-body harness with a short lanyard and clip it to the designated anchor point in the basket, never to a guardrail. 4. Test the ground controls first, including the emergency lowering function, before anyone goes up. 5. From the platform, check every function at low height: lift, swing, telescope, jib and drive. 6. Keep the load within the platform capacity shown on the machine, counting people, tools and materials. 7. Drive with the boom lowered and retracted wherever possible, and travel slowly on grades the machine is rated for. 8. Position close to the work so you never lean, climb or stand on the guardrails to reach. 9. When finished, retract and lower the boom fully, set the machine on level ground, shut it down and charge or refuel it as the rental terms require. ## Mistakes to avoid - Working near power lines without keeping the required clearance. Contact or arcing can be fatal, and the boom does not need to touch a line for current to jump. - Clipping the lanyard to the guardrail. The anchor point is engineered for a fall; the rail is not. - Driving at full height on uneven ground. Ruts and curbs can tip a raised boom even when the machine feels stable. - Ignoring wind. Large signs or panels in the basket act like sails and push the machine beyond what it can handle. - Using the boom as a crane. Hanging loads from the basket or boom is not what the machine is designed for. - Forgetting tail swing. The counterweight swings out behind the turntable and can strike walls, vehicles or people. ## Pro tips - Ask whether the job needs an articulating or a telescopic boom before you book; up-and-over reach and straight-out reach are different problems. - Put down mats or plywood on lawns and soft ground to spread the load and avoid ruts. - Check where the platform capacity drops; some machines carry less at full extension than when retracted. - Plan your positions so you move the base once per work zone instead of driving the raised platform around. - For straight-up work on flat slab, a [scissor lift rental](/scissor-lift-rental/) is often simpler, and a [telehandler rental](/telehandler-rental/) is the better fit when you need to place materials rather than people. ## Towable and spider boom lifts A towable boom lift hitches to a pickup, so you can move it between sites without a delivery truck. It suits painting, tree trimming and maintenance work. A spider or tracked lift is compact enough for narrow gates and indoor access, with tracks that are gentle on lawns and finished surfaces. Both set up on outriggers, so check the ground and setup space before you book. For a broader comparison, see the [man lift rental](/man-lift-rental/) guide. ## How to find a boom lift rental near me Rates are set by each supplier and vary by lift type, working height, power source, rental length, location and delivery. Daily, weekly and monthly options are common, and longer projects often make a weekly or monthly man lift rental more practical. To find cherry picker rental near me options, use the Browse equipment button to search by your city and rental dates. You will see live boom lift listings from rental suppliers on the Derental marketplace. Compare a few options on height, outreach, power type, delivery and each supplier's terms, then request the lift online.
Learn more →Stump Grinder Rental
A stump grinder rental lets you chew a tree stump down below ground level with a spinning toothed wheel, so you can replant, lay sod or mow over the spot. Match the machine size to your stump diameter, access path and how many stumps you need to clear. ## What a stump grinder does A stump grinder uses a heavy cutting wheel fitted with carbide teeth. The operator lowers the spinning wheel onto the stump and sweeps it side to side, shaving the wood into chips a little at a time while lowering the wheel deeper on each pass. The result is a hole full of wood chips and soil instead of a stump. Grinding is far faster than digging out a stump by hand and far less disruptive than pulling it with heavy equipment. Homeowners rent one after taking down a tree or to finally deal with an old stump in the yard. Landscapers and tree crews use them on lot clearing, fence lines and hardscape prep. A tree stump removal rental can also handle surface roots: many people search for a root grinder rental when roots are lifting a lawn or getting in the way of a new bed, and the same machine is used for that job. ## Types of stump grinders | Type | Best for | |---|---| | Small walk-behind or handlebar grinder | A few small to medium stumps, tight backyard access, homeowner jobs | | Self-propelled walk-behind grinder | Larger stumps, more work per day, moving across a property without pushing | | Tracked compact grinder | Slopes, soft ground and repeated jobs | | Towable or industrial grinder | Large stumps, land clearing and crew-scale work | A small stump grinder rental or portable stump grinder rental is usually what homeowners want. These are compact enough to fit through many standard gates and can be loaded on a trailer or, with some models, a pickup with ramps. An industrial stump grinder rental is a bigger commitment: more cutting power, but heavier, wider and in need of a proper trailer and tow vehicle. ## How to choose the right stump grinder - Measure the stump. Note the diameter at ground level and how many stumps you have. Bigger wheels and more horsepower handle large hardwood stumps faster. - Measure your access. Check gate widths, slopes and steps between the trailer and the stump. - Think about depth. Decide how far below grade you need to go. Planting a new tree or laying a patio may need a deeper grind than simply covering with sod. - Consider the wood. Hardwoods and old, dry stumps grind slower than soft or partly rotted ones. ## Tips before you rent a stump cutter - Call 811 before you grind. Utility lines can run near or under trees, and the wheel goes below grade. Wait until lines are marked. - Clear the area. Remove rocks, metal and debris around the stump, and dig away soil from the base where you can. Rocks dull or break teeth quickly. - Cut the stump low. Use a chainsaw to trim the stump as close to the ground as safely possible before grinding. - Wear PPE. Safety glasses or a face shield, hearing protection, gloves, sturdy boots and long pants are the minimum. Chips and stones can be thrown hard. - Keep people and pets well back while the wheel is turning, and follow the supplier's walkthrough on controls and shutoff. - Plan cleanup. You will be left with a pile of chips. Many people use them as mulch or backfill the hole with topsoil. ## How to use a stump grinder Grinding a stump goes smoothly when the site is prepped before the engine ever starts. 1. Call 811 a few working days before you grind so buried utilities are marked, and flag private lines yourself, such as sprinklers, landscape lighting and pet fences, because 811 does not mark those. 2. Cut the stump as low and flat as you safely can with a chainsaw, then clear rocks, gravel and soil from around it so the cutting teeth only touch wood. 3. Put on a face shield or safety glasses, hearing protection, gloves, long pants and sturdy boots, and keep people, pets and cars well back from the work area. 4. Walk around the machine: check that the teeth are tight and intact, the chip guard is in place, and the fuel and oil are topped up. 5. Start the engine with the cutting wheel raised and disengaged, clear of the stump. 6. Position the wheel at the front edge of the stump, engage it at full throttle, lower it a few inches into the wood and sweep slowly side to side. 7. Move forward a little after each pass, then lower the wheel and repeat until the stump is below grade, deeper if you plan to plant or lay sod there. 8. Follow the larger surface roots outward and grind them below grade too. 9. Raise the wheel, disengage it and wait until it stops spinning completely before you step toward the cutting area. 10. Rake out the chips, refill the hole with topsoil and clean chips and mud off the machine before return. ## Mistakes to avoid - Skipping the 811 call and grinding into a gas line, power cable or fiber line hidden under the stump. - Grinding into rocks, gravel or buried concrete. It breaks or dulls the teeth, throws stones across the yard and can lead to a damage charge from the supplier. - Taking too deep a bite. The wheel grabs, the engine bogs and the machine can jerk toward or away from you. - Standing in line with the chip discharge or letting helpers watch up close. Chips and stones fly far and fast. - Stopping just at ground level and laying sod over it. As the leftover wood rots, the spot sinks. - Filling the hole back in with the fresh chips. They break down, the soil settles and grass struggles to grow there. - Taking a walk-behind grinder across a steep slope where it can tip, or booking a machine too wide for your gate. ## Pro tips - Measure your narrowest gate and check the route for steps and soft lawn before you book, so the machine you reserve can actually reach the stump. - Flag every stump you want gone before the rental starts. Doing several in one session makes better use of the rental period. - Lean plywood or a tarp against nearby windows, siding and cars to catch flying chips. - Hardwood and large old stumps take longer to grind than small softwood ones, so plan extra time for them. - Save the chips. Once they have aged, they work as mulch on paths and beds. If the tree is still standing, start with a [chainsaw rental](/chainsaw-rental/) to drop it and cut the stump low. A [wood chipper rental](/wood-chipper-rental/) turns the limbs and brush into mulch the same weekend. ## How to find a stump grinder rental near me Rates are set by each supplier and vary by machine size, rental length, location and delivery. Some suppliers rent smaller grinders for half-day or full-day periods, while larger units may be offered daily or weekly. Use the Browse equipment button to search by your city and rental dates and see live equipment rental stump grinder listings from rental suppliers on the Derental marketplace. Compare a few options on machine size, what is included, delivery or pickup, and each supplier's terms, then request the stump grinder online. If you have several stumps, count them first so you can judge whether a bigger machine for a shorter period makes more sense than a small one for longer.
Learn more →Concrete Grinder Rental
A concrete grinder rental lets you level, smooth or strip a concrete floor using spinning diamond tooling, ready for polish, coatings or new flooring. Choose a walk-behind or handheld grinder for the area, plan dust control, and compare a few suppliers. ## What a concrete grinder is used for A concrete grinder uses diamond-embedded segments or cup wheels that spin against the slab and abrade the surface. Depending on the tooling, it can remove old coatings, glue, mastic, thinset and paint; flatten high spots and lippage at joints; open up the surface so epoxy and sealers bond; and, with progressively finer tooling, start the process of polishing concrete. Contractors use concrete grinding machine rental units to prep garage floors, basements, warehouses and retail spaces. Homeowners rent smaller units to remove carpet glue or tile adhesive before laying new flooring, or to knock down trip hazards on a sidewalk or patio. ## Types of concrete grinders | Type | Best for | |---|---| | Handheld concrete grinder | Edges, corners, steps, small areas and spot leveling; an angle grinder with a diamond cup wheel and dust shroud | | Single-head walk-behind grinder | Garages, basements and smaller rooms | | Multi-head or planetary walk-behind grinder | Large floors, more even finish, polishing prep | | Larger commercial floor grinder | Warehouses and big commercial slabs | Most floor projects use both: a walk behind concrete grinder rental for the open floor and a hand concrete grinder rental for edges and corners the big machine cannot reach. ## How to choose the right concrete floor grinder - Measure the area. Small areas and edges are handheld work. Rooms and garages call for a walk-behind machine. Large commercial floors need a bigger multi-head unit. - Identify what you are removing. Thin sealers, thick coatings, glue and high spots all call for different diamond tooling. Tell the supplier what is on the floor. - Know the concrete. Hard and soft concrete wear tooling differently. Ask the supplier which tooling suits your slab and how tooling wear is charged. - Check your power. Larger floor grinders may need a higher-voltage circuit or run on propane. Confirm what the machine needs and what is available on site. ## Tips before you rent - Control silica dust. Grinding concrete creates respirable crystalline silica. OSHA's silica standard calls for engineering controls, such as a shroud connected to a dust extractor with a HEPA filter, or water to keep dust down. Pair the grinder with a properly sized vacuum. - Wear PPE. A respirator appropriate for the dust level, safety glasses, hearing protection, gloves and steel-toe or sturdy boots. - Ventilate. Propane grinders produce carbon monoxide; use them only with adequate ventilation and monitoring. - Prep the floor. Remove nails, staples and debris, and mark or fill expansion joints and drains so tooling does not catch. - Test old coatings. Some older adhesives and paints can contain asbestos or lead. Have suspect materials tested before grinding them. - Plan transport. Walk-behind grinders are heavy and awkward. Bring ramps and help, or ask about delivery. ## How to find a concrete grinder rental near me Rates are set by each supplier and vary by machine type, tooling, dust extractor, rental length, location and delivery. Daily and weekly periods are common. To compare concrete grinders for rent near me, use the Browse equipment button to search by your city and rental dates. You will see live floor grinder rental listings from rental suppliers on the Derental marketplace. Compare a few options on machine size, tooling, dust control equipment and each supplier's terms, then request your concrete floor grinder rental online.
Learn more →Sod Cutter Rental
A sod cutter rental slices under your lawn and lifts the grass and roots off in clean strips, so you can clear ground for a patio, garden bed or new sod. Set the cutting depth, mark hidden lines first, and compare a few suppliers. ## What a sod cutter is used for A sod cutter has a flat blade that runs horizontally beneath the turf, cutting the root zone free from the soil below. A powered machine vibrates the blade back and forth as it moves forward, leaving a strip of grass that you can roll up and carry away. The bare soil underneath is ready for the next step. People rent one to remove an old or weedy lawn before laying fresh sod, to clear space for patios, walkways, pavers and sheds, to create new garden and planting beds, and to cut edges for landscape borders. Landscapers use them on renovation jobs and for transplanting sod from one part of a property to another. Removing turf with a machine is far faster and easier on your back than cutting it out with a spade. ## Types of sod cutters | Type | What to know | |---|---| | Manual kick sod cutter | A long-handled blade you push with your foot; fine for edging and small patches | | Power sod cutter, walk-behind | The standard rental; gas engine drives the blade and wheels | | Wider commercial sod cutter | Covers more ground per pass on large lawns and commercial jobs | A power sod cutter rental is the right tool for most lawns. Cutting width and depth are adjustable on most machines, so you can set how thick the strips are. Thin cuts are easier to roll and carry; thicker cuts keep more root and soil if you plan to replant the sod elsewhere. ## How to choose the right sod cutter - Measure the area. A small patch near a walkway can be done with a manual tool. Anything larger is a job for a sod cutter machine rental. - Decide what happens to the sod. If you are replanting it, keep strips short and moist and replant quickly. If you are discarding it, plan disposal before you start. - Check your soil. Moist, even ground cuts cleanly. Rocky or root-filled soil slows you down and wears the blade. - Consider access. Sod cutters are heavy and compact. Check gate widths and steps between the trailer and the lawn. ## Tips before you rent - Call 811 before cutting. Even though sod cutters work shallow, some utility lines, especially communication lines, can sit close to the surface. - Flag sprinkler heads, irrigation lines, valve boxes, pet fence wire and landscape lighting cables. - Water the lawn a day or two before. Slightly moist soil cuts cleanly; soggy soil clogs the blade and dry soil fights back. - Mow short first so the machine handles easily and you can see the ground. - Cut in straight passes and roll strips as you go so they do not dry out or get in the way. - Wear sturdy boots, gloves, eye and hearing protection. Keep feet clear of the blade and know how to stop the drive. - Plan for weight. Rolled sod is heavy. Have a wheelbarrow, helpers and a disposal plan, whether that is a trailer, a dumpster or a compost area. ## How to find a sod cutter rental near me Rates are set by each supplier and vary by machine size, rental length, location and delivery. Half-day and daily periods are common for residential jobs. To rent a sod cutter near me, use the Browse equipment button to search by your city and rental dates. You will see live turf cutter rental listings from rental suppliers on the Derental marketplace. Compare a few options on cutting width, transport or delivery and each supplier's terms, then request the machine online. If you are tilling or laying new sod right after, consider booking the tiller or other tools for the same dates.
Learn more →Jackhammer Rental
A jackhammer rental breaks up concrete slabs, sidewalks, footings, asphalt and rock that would be impossible to remove by hand. Most jobs use an electric demolition hammer or breaker; heavier work calls for a pneumatic breaker or a skid steer hydraulic hammer. ## What a Jackhammer Is Used For Jackhammers deliver rapid, heavy blows through a chisel or point to fracture hard material. Common jobs include tearing out an old patio or walkway, breaking a garage or basement slab for plumbing, removing concrete steps, chipping footings, busting up asphalt, and breaking rock or frozen ground. Smaller demolition hammers handle tile removal and wall chipping. For a large driveway or foundation, a concrete breaker rental on a skid steer or mini excavator is often faster and easier on the operator. ## Types and Sizes | Type | Best for | Notes | |---|---|---| | Electric demolition hammer | Tile, thin concrete, chipping, wall work | Lighter; can be used at waist height or on walls | | Electric breaker (jackhammer) | Slabs, sidewalks, patios | Plugs into standard or heavy-duty power; no compressor needed | | Pneumatic breaker | Thick concrete, rock, heavy daily use | Needs a towable air compressor and hose | | Hydraulic hammer attachment | Driveways, foundations, large demolition | Mounts on a skid steer or excavator | Bits include a moil point for breaking, a flat chisel for cutting lines, a wide spade for asphalt and dirt, and scaling chisels for tile. Ask the supplier which bits come with the tool. ## How to Choose the Right Breaker - Thickness matters most. Thin slabs and patios break well with an electric jackhammer. Thicker or heavily reinforced concrete calls for a heavier electric, pneumatic or hydraulic breaker. - Direction of work. Breaking down into a floor uses a full-size breaker. Chipping walls, overhead or horizontal work needs a lighter demolition hammer. - Volume. A few square feet is a small-hammer job. A full driveway is a skid steer jack hammer rental job, and you will also need a way to haul away the debris. - Power source. Electric is simplest for homeowners. Pneumatic means also renting and towing a compressor. Hydraulic requires a carrier machine and operator. ## Tips Before You Rent - Call 811 before breaking concrete near the ground, and check for rebar, embedded conduit or radiant heating in slabs. - Score a line with a saw first where you want a clean edge, then break up to it. This keeps the remaining concrete intact. - Start at an edge or a crack and work in small bites rather than trying to break the middle of a slab. - Let the tool's weight do the work. Do not pry with the bit, which can bind or break it. - Wear safety glasses, hearing protection, gloves, steel-toe boots and long pants. Breaking concrete releases silica dust, so use water to control dust or wear an appropriate respirator, as OSHA's silica rules require on job sites. - Use the right extension cord gauge and length for electric breakers, and keep cords away from the bit. - Plan for debris. Broken concrete is heavy, so arrange a dumpster, dump trailer or haul-off before you start. ## How to Find Jackhammer Rental Near You Use the Browse equipment button to search jackhammer rental near me by city and rental dates. You will see live listings from rental suppliers on the Derental marketplace, including electric jackhammer rental options, demolition hammers, pneumatic breakers with compressors and hydraulic hammer attachments. If you are wondering about the cost to rent a jackhammer, rates are set by each supplier and vary by tool size, power type, rental length, location and delivery. Compare which bits are included, whether a compressor or hoses are bundled for pneumatic units, and each supplier's pickup hours and terms. Once you have found the right tool, request it online and confirm details directly with the supplier.
Learn more →Pallet Jack Rental
A pallet jack rental gives you a simple way to lift and roll loaded pallets across warehouse floors, loading docks and job sites without a full forklift. Choose a manual hand jack for occasional moves or an electric pallet jack for heavier, all-day work, then compare suppliers' rates and terms. ## What a pallet jack is used for A pallet jack, also called a pallet mover or pallet lifter, slides its forks into the openings of a pallet, raises the load just enough to clear the floor and lets one person push or steer it to a new spot. It does not stack loads high like a forklift. It moves them horizontally. Common uses include: - Unloading pallets from a box truck or trailer at a dock - Moving inventory during a store reset or warehouse reorganization - Staging building materials such as flooring, tile or bagged product inside a job site - Shifting heavy machinery or crates that are already on skids - Handling deliveries for events, trade shows and office moves ## Types of pallet jacks you can rent | Type | How it works | Best for | |---|---|---| | Manual hand pallet jack | Pump the handle to raise, push and pull by hand | Short moves, light to moderate loads, tight budgets | | Electric walkie pallet jack | Battery-powered lift and drive, operator walks behind | Frequent moves, longer distances, heavier pallets | | Rider pallet jack | Operator stands on a platform | Large warehouses and long runs | | Specialty jacks | Narrow forks, extra-long forks, low-profile or rough-terrain wheels | Odd pallet sizes, low skids, gravel or uneven ground | A hand pallet jack rental is the simplest choice for most homeowners and small businesses. An electric or motorized pallet jack rental makes more sense when you are moving dozens of pallets a day or working on a ramp where pushing by hand gets tiring. ## How to choose the right pallet jack Start with the load. Check the weight of your heaviest pallet and confirm the jack's rated capacity comfortably exceeds it. Then look at the pallet itself: standard fork width and length suit most common pallets, but half pallets, extra-long skids or pallets with closed bottoms may need a different fork setup. Next, think about the floor. Standard pallet jacks have small polyurethane or nylon wheels that roll best on smooth, level concrete. Cracked slabs, gravel, asphalt and steep ramps call for a rough-terrain model or a different machine entirely, such as a forklift. Finally, consider distance and frequency. If you are moving a few pallets once, a manual jack is fine. If you are running pallets back and forth for hours, an electric unit reduces fatigue and keeps the work steady. ## Tips before you rent - Measure doorways, aisles and truck beds so the jack and the pallet fit through together. - Check whether your truck or trailer has a dock or lift gate. A pallet jack cannot climb a step. - Never ride on a manual pallet jack or let anyone stand on the forks. - Keep the load low and centered, and avoid slopes and ramps wherever possible. A loaded jack can run away from you on a grade. - Wear safety-toe footwear, since the most common injuries involve feet and hands near the wheels and forks. - Under OSHA rules, powered pallet trucks are powered industrial trucks, so operators of electric pallet jacks at work need training and evaluation before using one. - For electric models, ask how the battery is charged and how long a charge typically lasts for your kind of work. ## How to find a pallet jack rental near me When you search for a pallet jack rental near me, start with your city and the dates you need the equipment. Jobsite Jockey connects you to live inventory from rental suppliers on the Derental marketplace, so you can see who has hand and electric pallet jacks available. Compare a few suppliers before you book. Rates are set by each supplier and vary by type, rental length, location and whether you need delivery. Ask about pickup options, damage coverage, battery charging for electric units and what happens if you need the jack longer than planned. When you find a good fit, request the rental online and confirm the details directly with the supplier. Use the Browse equipment button to see pallet jacks for rent in your area.
Learn more →Water Pump Rental
A water pump rental moves water out of flooded areas, excavations, pools and tanks. Choose a pump by flow, lift height and how much debris is in the water, plan where the water will go and compare suppliers for your dates. ## What a water pump is used for Pumps dewater trenches and foundations, drain flooded basements and storage areas, empty pools and ponds, and move water for irrigation and dust control. If you are also drying a building, see the [dehumidifier rental](/dehumidifier-rental/) guide. To power an electric pump, see [generator rental](/generator-rental/). ## Types of pumps | Type | Best for | |---|---| | Submersible electric pump | Basements, pits and clear to lightly dirty water | | Centrifugal utility pump | General dewatering with clean water | | Trash pump | Muddy water with solids and debris | | Diaphragm pump | Slow-seeping water and thick slurry | | Large diesel pump | Big dewatering and bypass jobs | ## How to choose the right pump - Work out the flow. Volume and how fast you need it gone determine gallons per minute. - Check total head. Lift height and hose length both reduce flow. - Check the solids. A trash pump's rating tells you the size of solid it can pass. - Choose power. Electric suits indoor work, while gas or diesel suits outdoor use. - Measure hoses. You'll need suction and discharge hose long enough for the job. ## How to use a pump 1. Pick a stable spot outdoors for any engine-driven pump, and never run engines indoors. 2. Connect suction hose with a strainer, and discharge hose to the planned location. 3. Prime the pump if required. 4. Start the pump and check for suction leaks. 5. Keep the strainer clear, and don't run the pump dry. 6. When done, flush it with clean water and drain it. ## Mistakes to avoid - Running an engine indoors. Carbon monoxide can kill quickly. - Skipping electrical safety in standing water. Use protected circuits, and stay clear if power may be live. - Pumping out a basement too fast after a flood. Hydrostatic pressure may damage walls, so check guidance first. - Discharging into the wrong place. Pumped water can erode soil or pollute drains. - Using a clear water pump for dirty water. Debris can quickly jam it. ## Tips before you rent - Bring water source details, lift height and distance. - Ask if hoses, strainers and fittings are included. - Reserve early when storms are forecast. ## How to find a pump rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by pump size, rental length and location.
Learn more →Pressure Washer Rental
A pressure washer rental gives you a gas or electric machine that blasts dirt, mildew and grime off driveways, decks, siding and equipment. Pick the right pressure and flow for the surface, use the correct nozzle, and compare a few suppliers before you book. ## What a pressure washer is used for A pressure washer pumps water through a hose and spray wand at far higher pressure than a garden hose. People rent them to clean concrete driveways, sidewalks and patios, strip grime from vinyl siding, prep decks and fences for stain, clean outdoor furniture and grills, wash trucks and trailers, and degrease heavy equipment. Contractors use them for surface prep before painting or sealing, and property managers use them to refresh buildings between tenants. Whether you search for a power washer rental or a pressure cleaner rental, you are looking at the same type of machine. The terms are used interchangeably. ## Types of pressure washers Pressure washers are rated by pressure (PSI) and flow (GPM). Higher pressure loosens stubborn grime, and higher flow rinses it away faster. Together they determine how quickly you can clean. | Type | Best for | |---|---| | Electric, light duty | Cars, patio furniture, small decks, light cleaning near the house | | Gas, medium duty | Driveways, siding, fences, most homeowner jobs | | Gas, heavy duty or commercial | Large concrete areas, contractor surface prep, frequent use | | Hot water | Grease, oil and heavy equipment cleaning | A surface cleaner attachment, a round hood with spinning nozzles underneath, makes flat concrete go much faster and leaves a more even finish than a wand alone. Ask whether one is available with your pressure washing machine rental. ## How to choose the right pressure washer - Match pressure to the surface. Concrete can take more pressure. Wood, painted surfaces, siding and vehicles need less, along with a wider nozzle. - Use the right nozzle. Tips are usually color-coded by spray angle. Narrow tips concentrate force and can gouge wood or etch concrete; wide tips are gentler. The soap tip applies detergent at low pressure. - Consider the water supply. Your garden hose and spigot need to deliver enough flow to feed the machine. Ask the supplier what the unit requires. - Think about power. Electric units are quieter and need a grounded outlet; gas units deliver more power and work away from the house. ## Tips before you rent - Wear PPE. Safety glasses, closed-toe shoes and long pants. Hearing protection is smart with gas units. - Never point the wand at people, pets or yourself. High-pressure water can cause serious injury. - Start wide and back off. Begin with a wide nozzle and hold the wand farther away, then move closer as needed. - Protect the house. Close windows, cover outlets and light fixtures, and avoid spraying upward under siding laps. - Be careful on older homes. If paint may contain lead, do not blast it off with a pressure washer; follow proper lead-safe practices. - Use gas units outdoors only, never in garages or enclosed spaces, because of carbon monoxide. - Transport carefully. Secure the machine upright and keep gas units level so fuel and oil do not spill. ## How to use a pressure washer Follow these steps in order the first time you run a rented pressure washer. 1. Set the machine on level ground outdoors, connect your garden hose to the water inlet and the high-pressure hose to the pump outlet, and snug every fitting so nothing leaks under pressure. 2. Turn the spigot fully on and squeeze the trigger with the motor off until a steady stream comes out of the wand. This purges air from the pump, which can be damaged if it runs dry. 3. Put on safety glasses, closed-toe shoes and long pants, and add hearing protection for a gas unit. Check the oil and fuel level before starting. 4. Snap in the widest tip that might do the job, usually the 40-degree tip, and engage the trigger lock while you start the machine. 5. Start the engine or switch on the motor with the wand pointed at the ground, then test on a hidden spot from a couple of feet away and move closer only until the dirt lifts without marking the surface. 6. Clean with steady, overlapping strokes at a consistent distance. On siding, apply detergent with the soap tip from the bottom up and rinse from the top down. 7. Lock the trigger every time you change tips or move the ladder, hose or machine. 8. To shut down, turn off the engine, turn off the water, then squeeze the trigger to release trapped pressure before you disconnect any hose. 9. Before return, drain and coil the hoses without kinks, collect every nozzle tip, wipe the machine down and refuel if the supplier asks for it back full. ## Mistakes to avoid - Using the zero-degree red tip on wood, siding or a car. It acts like a cutting tool, splinters deck boards, strips paint and leaves permanent stripes. - Spraying upward under vinyl siding laps or straight into window seals and vents, which drives water behind the siding and into the wall. - Holding the wand still or sweeping in short arcs on concrete, which leaves lighter stripes and etched spots that show once it dries. - Letting the pump run for long stretches with the trigger released. The water trapped in the pump heats up and can damage its seals. - Starving the pump with a kinked garden hose or a weak spigot, which makes the machine pulse and can damage it. - Working from a ladder. The kickback from the wand can pull you off balance, so use an extension wand from the ground instead. - Pouring bleach or other chemicals into the machine without checking that the supplier allows them, or expecting soap to flow through a high-pressure tip. Most units only draw detergent with the low-pressure soap tip. ## Pro tips - Soak plants and lawn next to the work area before you start and rinse them again afterward so detergent runoff does not burn them. - Let detergent dwell for a few minutes, but never let it dry on the surface or it will streak. - On wood decks and fences, follow the grain with a wide tip and let the wood dry fully before you stain or seal it. - On a driveway, run the surface cleaner over the open areas and use the wand only for edges, cracks and steps, then rinse the loosened grime toward the street or drain in one direction. - Keep the high-pressure hose off sharp edges and hot engine parts. A pinhole leak in that hose can cut skin. If you are washing a deck, fence or siding to repaint it, a [paint sprayer rental](/paint-sprayer-rental/) can make the new coat go on faster once the surface is dry. For stained or uneven concrete that washing alone will not fix, look at a [concrete grinder rental](/concrete-grinder-rental/). ## How to find a pressure washer rental near me Rates are set by each supplier and vary by machine size, hot or cold water, accessories, rental length, location and delivery. Short periods such as half-day or daily are common for homeowner jobs. To compare rental pressure washers near me, use the Browse equipment button to search by your city and rental dates. You will see live listings from rental suppliers on the Derental marketplace. Compare a few options on pressure and flow ratings, included hoses and nozzles, surface cleaner availability and each supplier's terms, then request the machine online. Measure the area you plan to clean first so you can judge whether a bigger machine will save you hours.
Learn more →Scaffolding & Ladder Rental
A scaffolding rental gives crews a stable, guarded work platform for painting, stucco, masonry, siding and interior ceilings. Choose a rolling tower or frame scaffold based on height and surface, confirm who will erect it, and compare suppliers for your dates. ## What scaffolding is used for Scaffolding supports workers and materials for jobs longer than a ladder can safely handle: stucco and painting, brick and block, window installation, gutter work and tall interior ceilings. Scaffold planks, guardrails, base plates and leveling jacks are typically rented with it. For short tasks, a [ladder rental](/ladder-rental/) may be enough, and a [scissor lift rental](/scissor-lift-rental/) can be faster on flat floors. ## Types of scaffolding | Type | Best for | |---|---| | Rolling tower | Interior work that moves often on a flat floor | | Frame scaffold | Exterior walls, masonry and general construction | | Baker or narrow scaffold | Doorways, drywall and low interior work | | Ladder jacks and planks | Small, light-duty exterior work | | Trash chute | Dropping demolition debris safely to a dumpster | ## How to choose the right scaffolding - Measure the working height. Your platform should keep you within comfortable reach, without leaning or stretching. - Measure the wall run. Count how many frames and planks you need to cover the length. - Check the ground. Frames need firm footing. Use base plates, mud sills and leveling jacks on soft or uneven ground. - Add guardrails and access. Plan for rails, toe boards and a safe way to climb. - Decide who erects it. Some suppliers can erect it for you, or you may need a trained crew. ## How to set up scaffolding safely 1. Have a competent person plan and inspect the erection. 2. Set base plates and mud sills, and level the frames. 3. Lock in braces, connect frames and fully plank each working level. 4. Install guardrails and safe ladder access as you go up. 5. Tie the scaffold to the building as required for its height. 6. Inspect it before each shift, and after high wind or any impact. ## Mistakes to avoid - Climbing the cross braces. Use proper ladder access. - Skipping guardrails on low levels. Falls from low heights cause serious injuries. - Standing on rolling towers while moving them. Always clear and lock them first. - Setting frames on bricks or blocks. They can crush or shift under load. - Overloading planks. Know the capacity and stack materials evenly. ## Tips before you rent - Bring a simple count of frames, braces, planks and accessories, or ask the supplier to work it out. - Note that scaffold parts are often priced per piece, so a total is worth requesting. - Ask about delivery, stacking space and whether a forklift is needed for unloading. - Count everything at pickup, since missing pieces are usually charged. ## How to find a scaffolding rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, check which parts each listing includes and request the rental online. Rates are set by each supplier and vary by parts, rental length and location.
Learn more →Man Lift & Cherry Picker Rental
A man lift rental raises one or more workers on a platform for overhead work, and a cherry picker is the common name for a boom-style man lift. Choose by working height, outreach and ground, and compare suppliers for your dates. ## What a man lift is used for Man lifts put people at height for lighting, signs, painting, HVAC, sprinklers, trees and building maintenance. "Man lift" covers several machines. Vertical mast lifts suit one person indoors, while booms reach up and over obstacles. For more detail, see the [scissor lift](/scissor-lift-rental/), [boom lift](/boom-lift-rental/) and [bucket truck](/bucket-truck-rental/) guides. ## Types of man lifts | Type | Best for | |---|---| | Vertical mast lift | One worker in tight indoor spaces | | Scissor lift | Larger decks that go straight up | | Articulating boom (cherry picker) | Reaching up and over obstacles | | Telescopic boom | Long straight reach outdoors | | Towable boom | Moving between sites behind a truck | | Spider or tracked lift | Narrow access and delicate ground | ## How to choose the right man lift - Start with height. Working height is roughly platform height plus your reach. - Check outreach. Reaching over a roofline or obstacle calls for a boom. - Count people and tools. Keep the total under the platform capacity. - Match the ground. Slab machines need firm, level floors, while rough terrain models handle job sites. - Measure access. Door widths, gates and floor load limits decide what fits. ## How to use a man lift safely 1. Make sure operators are trained and familiar with this machine. 2. Do a pre-use check of controls, guardrails, tires and the emergency lowering system. 3. Survey for slopes, holes, overhead hazards and power lines. 4. Wear fall protection where the machine and rules call for it. 5. Raise and drive only within the manufacturer's limits. 6. Lower fully before moving any distance or leaving the machine. ## Mistakes to avoid - Picking by platform height alone. Outreach matters on most boom jobs. - Overloading the platform. Materials count toward capacity. - Ignoring wind ratings. Outdoor work in gusts can be unsafe. - Climbing on the rails. Stay on the platform floor. - Working near power lines without a plan. Keep the required distance. ## Tips before you rent - Share the height, reach and ground conditions with suppliers. - Ask about delivery, charging or fuel, and the return condition. - Ask for a quick familiarization at drop-off. ## How to find a man lift rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by lift type, height, rental length and location.
Learn more →Plate Compactor & Roller Rental
A plate compactor rental firms up soil, gravel and pavers so your base won't settle later. Choose a plate for granular material, a rammer for clay and tight trenches or a roller for larger areas, then compare suppliers for your dates. ## What a plate compactor is used for Compactors prepare base for patios, driveways, walkways and slabs. They also bed pavers, tamp trench backfill and patch asphalt. Larger jobs such as parking lots and road base usually step up to a roller. ## Types of compactors | Type | Best for | |---|---| | Forward plate compactor | Gravel, sand, pavers and asphalt patching | | Reversible plate compactor | Thick layers and tight areas | | Rammer or jumping jack | Clay soil and narrow trenches | | Walk-behind roller | Sidewalks, patches and small lots | | Ride-on double drum roller | Parking lots and driveways | | Trench roller | Deep trenches, operated by remote | ## How to choose the right compactor - Identify your material. Granular material suits vibrating plates. Cohesive clay needs the impact of a rammer. - Check lift thickness. Each machine compacts only so deep, so add material in layers. - Size it to the area. A small plate can do a patio, but a larger job goes faster with a roller. - Protect pavers. Use a pad on the plate to avoid chipping. - Check the space. Rammers fit where plates can't. ## How to use a plate compactor 1. Grade the area, and moisten the material if it is very dry. 2. Check the engine oil and fuel, and wear hearing and eye protection. 3. Start the machine and let it warm up on a firm surface. 4. Walk it in overlapping passes, starting from the edges and working in. 5. Make several passes, adding new layers only after each is firm. 6. Shut it down, and let it cool before loading. ## Mistakes to avoid - Trying to compact one thick layer. Thin lifts compact far better. - Using a plate on wet clay. It bounces or sinks, and doesn't compact. - Skipping the moisture check. Very dry or very wet material won't reach density. - Running without a paver pad. Bare steel scars pavers. - Hurting your back on the lift. These machines are heavy, so use a ramp or two people. ## Tips before you rent - Ask the machine's weight, and bring a way to load it. - Ask about paver pads and fuel type. - If you need to dig first, line up a [trencher rental](/trencher-rental/) or [mini excavator rental](/mini-excavator-rental/) for the same dates. ## How to find a plate compactor rental near you Use the Browse equipment button to search by your city and rental dates on the Derental marketplace. Compare suppliers by location, delivery and rates, and request the rental online. Rates are set by each supplier and vary by machine type, rental length and location.
Learn more →Temporary Fence Rental
A temporary fence rental secures a construction site, event or property with chain link panels, barricades or crowd control barriers. Measure the run, plan the gates and check your city's rules, then send a request with your details. ## What temporary fencing is used for Construction sites use fencing to keep people out and protect materials. Events use it for crowd control, entrances and secured areas. Property owners use it around vacant lots and repairs. For traffic and road work, see the [traffic control equipment rental](/traffic-control-equipment-rental/) guide. ## Types of temporary fencing | Type | Best for | |---|---| | Chain link panels on stands | Construction sites and long runs | | Driven post chain link | Longer projects needing more security | | Privacy screen or windscreen | Blocking views and dust | | Crowd control barriers | Events, lines and entrances | | Plastic barricades | Short-term perimeters and walkways | ## How to choose the right fence - Measure the run. Panels come in set lengths, so add up the total. - Plan gates. Vehicle and walk-through gates need their own panels. - Think about wind. Privacy screens catch wind and need extra bracing. - Consider security. Taller fences and locked gates deter theft. - Check access. Fences can't block fire lanes or required exits. ## How to plan a fence install 1. Mark the fence line and gates. 2. Check your city's rules for fencing on sidewalks or streets. 3. Confirm the supplier will install, or plan your crew. 4. Add sandbags or weights for stability. 5. Inspect the fence after storms and high wind. 6. Schedule removal when the job ends. ## Mistakes to avoid - Blocking exits or fire lanes. It's dangerous and often illegal. - Skipping bracing on windy sites. Panels can blow over. - Forgetting gates. Crews and deliveries need access. - Leaving gaps. People will find them. - Not checking permits for public sidewalks. ## Tips before you request - Have your address, dates and total fence length ready. - Ask whether delivery, install and removal are included. - Ask about privacy screens and gate options. ## How to request a temporary fence Use the Request a rental button and tell us your city, dates and fence length. We are still adding fence suppliers and will follow up with what's available. Rates are set by each supplier and depend on length, rental time, install and location.
Learn more →Portable Toilet & Restroom Trailer Rental
A porta potty rental puts portable toilets at your jobsite or event, with regular pumping and cleaning from the supplier. Work out how many units you need from your headcount and time on site, then choose the type. We are still adding portable toilet suppliers, so send a request with your details. ## What portable toilets are used for Construction sites, outdoor events, festivals, weddings, film shoots, remodels with the plumbing shut off and emergencies all use portable toilets. Longer projects usually add handwash or sanitizer stations. For a more upscale setup, look at a [restroom trailer rental](/restroom-trailer-rental/). ## Types of portable toilets | Type | Best for | |---|---| | Standard unit | Jobsites and basic outdoor events | | Unit with handwash sink | Longer projects and food-serving events | | Flushing unit | Events that want a nicer experience | | Wheelchair accessible (ADA) unit | Accessibility at public events and sites | | Hoistable or high-rise unit | Upper floors of buildings under construction | | Handwash station | Added separately for crews and guests | ## How to choose how many you need - Start with people and hours. More people or longer events mean more units. - Add for food and drinks. Events serving alcohol or big meals need more capacity. - Include accessible units. Public events generally need at least one, and many need more. - Account for service frequency. A busy jobsite may need more than one pump-out a week. - Ask the supplier to check your count. They see these ratios every day. ## How to set up portable toilets 1. Pick a firm, level spot that a pump truck can reach. 2. Keep units a reasonable distance from food service and entries, and clear of foot traffic. 3. Face the doors away from the wind, and anchor units in windy spots. 4. Confirm the delivery, service and pickup schedule. 5. Add lighting for evening use, and post the supplier's number on site. ## Mistakes to avoid - Under-ordering. Long lines and overflowing tanks ruin events and slow crews. - Forgetting truck access. If the pump truck can't reach it, it doesn't get serviced. - Placing units on a slope. Tipped units are a mess and a hazard. - Skipping handwashing. Sanitizer or sinks should be part of the plan. - Booking at the last minute. Popular event weekends sell out early. ## Tips before you request - Have your address, dates, headcount and hours ready. - Ask how often units are serviced and what happens if one needs extra service. - Ask about damage, theft and any permit needed for the street or sidewalk. - Confirm that delivery and pickup times suit your site. ## Porta potties for events Weddings, parties, festivals and outdoor events need more than a basic unit. Plan for your guest count and hours, and add more if you're serving food or drinks. Choose units with sinks or flushing for nicer events, and include accessible units for public ones. For upscale events, luxury restroom trailers offer flushing toilets, sinks, lighting and climate control. See the [restroom trailer rental](/restroom-trailer-rental/) guide. ## Porta potties for jobsites Construction sites need toilets close to where crews work, serviced on a regular schedule. The number of units depends on crew size and local and workplace rules. Add handwashing stations, and use hoistable units for upper floors on taller buildings. Place units where a service truck can reach them, on level ground, away from traffic. | Use | What to plan | |---|---| | Wedding or party | Guest count, hours, flushing units, sinks and lighting | | Festival or public event | Accessible units, handwashing stations and frequent service | | Luxury event | Restroom trailer with power and water hookups | | Construction site | Crew size, weekly service, handwashing and truck access | | High-rise project | Hoistable units for upper floors | ## How to request a portable toilet rental Use the Request a rental button and tell us your city, dates and how many units you need. We are still adding suppliers in this category and will follow up with what is available. Rates are set by each supplier and depend on unit type, service schedule, rental length and location.
Learn more →Why choose Jobsite Jockey?
- ✓20 equipment categories, from earthmoving to aerial lifts
- ✓Real marketplace inventory with supplier locations shown
- ✓Compare suppliers by location, delivery and rates
- ✓Request rentals online, no calling yard to yard
- ✓Practical sizing and selection tips on every equipment page
- ✓Rental companies can list their fleet on our vendor page
Browse equipment
Find, compare and rent construction equipment from suppliers on one marketplace.
Frequently asked questions
- How does {niche} work?
- {niche} is an equipment rental guide. Each equipment page explains what you need, then links you to live inventory on the Derental marketplace, where you can compare suppliers and request the rental. For equipment the marketplace does not carry yet, like portable toilets, use our request form.
- Who actually rents me the equipment?
- Independent rental companies listed on Derental. Supplier locations, rates, availability, delivery and terms are set by each supplier, so compare a few before you book.
- What kinds of equipment can I find?
- Earthmoving, compaction, concrete and masonry, aerial lifts, forklifts and telehandlers, generators and light towers, pumps, HVAC, lawn and landscape, traffic control, scaffolding, plumbing and electrical tools, hand and power tools, and jobsite vehicles and trailers. Coverage varies by category and location.
- Do you deliver?
- Many suppliers on the marketplace offer delivery and pickup for larger machines. Delivery options and fees vary by supplier and location, so check them when you compare.
- I own a rental company. Can I list my equipment?
- Yes. Use the Become a vendor page to apply, and we'll follow up to help get your fleet in front of contractors searching in your area.